Author Topic: LR32 System required accessories  (Read 952 times)

0 Members and 1 Guest are viewing this topic.

Offline Mario Turcot

  • Posts: 238
LR32 System required accessories
« on: January 02, 2018, 08:49 AM »
Hello all,

Obviously I`m new to the Festool world and I feel a bit dazed by the options and what is really required to do specific task. I am planning to do a bunch of cabinets for my new shop. The cabinets will have movable shelfs and Sys-AZ drawers. For that matter I want to use the LR32 system for customization.

Note: I already have the LR32 Guide Rail and will acquire the OF 1400 EQ this week.

Here my question, do I need the full LR 32 Hole Drilling Set in Systainer or only a few accessories will do?

Thanks in advance.
I like to learn from others mistakes and I also like to learn from the Masters.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dick Mahany

  • Posts: 182
Re: LR32 System required accessories
« Reply #1 on: January 02, 2018, 09:02 AM »
I'm sure you will get many opinions on this, however my experience is that I used almost everything in the set.  I built over 30 cabinets and 50 doors and the only thing I didn't use were the Festool Router retaining disks (since I have a different brand of router)
The kit is pricey, however it really does keep all of the miscellaneous parts organized well and ready at hand.

Once I tried the 32mm system approach for cabinets and doors, I was sold and have never looked back.  In my application, I made all of the cabinets at one time and then built the doors several months later.  Every door fit perfectly just working from nominal dimensions without the need to fit or tweak hinge spacing.  It all comes down to measuring carefully when building the components.

Offline T. Ernsberger

  • Posts: 855
Re: LR32 System required accessories
« Reply #2 on: January 02, 2018, 09:12 AM »
I just bought the LR32 plate.  I think it’s around $130.  It does everything I need it to do.  I use it with the TSO square and a Festool quick clamp.

Offline Mario Turcot

  • Posts: 238
Re: LR32 System required accessories
« Reply #3 on: January 02, 2018, 09:28 AM »
Thanks to both for your reply.

Dick, this is what I thought, to me Festool is all about being organized and the LR32 Systainer is doing perfect job by keeping everything together instead of spread out in the shop. I hate spending time to find that one little part that is always under a pile of other stuff. and yes it's pricey 720$CAd for me  [sad]

T.Ernsberger, I just order that square firguring I would need it somehow lol. Good to know that only the guide plate suffice to go around the LR32 system, thanks  :) the guide plate alone is 180$CAD on my local LeeValley
I like to learn from others mistakes and I also like to learn from the Masters.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11212
  • Another Avatar Coming Soon
Re: LR32 System required accessories
« Reply #4 on: January 02, 2018, 10:45 AM »
I would echo the advice that you just buy the whole set.  If you are new to the system having all the parts available to you so that you can watch videos and see how to set it up will be helpful.

You could cut your costs somewhat by not ordering the thru bit, the door drilling bit (if you are not doing doors), the clamps (you really should use clamps) if you have them, and the systainer.

Here in the US the items needed by most currently are:


Number       Quantity                               Description                                                       Cost ($USD)
583290             1               Basic Set (base plate, centering mandrel, edges stops (2)             $256.00
496938             2               End Stops / connectors                                                              $  60.00 (for two)
491066             1               5 MM bit                                                                                   $  34.00
489570             1               Clamps (basic set of 2)                                                              $  44.00
                                                                                                   Total                              $394.00

Set Cost in Systainer                                $ 510.00
       Less:    Systainer 1                          <$  72.00>
                  Thru Bit                               <$  40.00>
                  35 MM Bit                            <$  86.00>
                                      TOTAL                $312.00 *

*Note:  This does not include pricing for Systainer insert and Cardboard Top Liner, So the set is an even better deal if completeness is desired.

Peter

                         

Offline Mario Turcot

  • Posts: 238
Re: LR32 System required accessories
« Reply #5 on: January 02, 2018, 10:55 AM »
Thanks Peter,

It`s done, I bought both the OF 1400 EQ and the LR32 Systainer  [big grin]

I`m sure I will find some use for the hinge bit, like you said it`s not the most wanted item. Now it`s time to learn how to use it.
I like to learn from others mistakes and I also like to learn from the Masters.