Author Topic: Refinished Workbench & Ugly Casters after 20 Years  (Read 1086 times)

0 Members and 1 Guest are viewing this topic.

Offline Dick Mahany

  • Posts: 384
Refinished Workbench & Ugly Casters after 20 Years
« on: August 18, 2018, 07:04 PM »
I've spent the last few days sanding my 20 year old workbench with an RO 90.  That little sander worked wonders getting into and around the legs and frame of the workbench.  It made relatively quick work of removing many years of glue, overspray, stains, and dings.  I didn't use it on the top as the 90mm pads would have quickly made the flatness uneven.

I wiped on a coat of Watco Oil natural finish and it smells awful.  I'm wondering if that finish has been reformulated as I can't remember it smelling so overwhelming like tung oil? 

This is a general purpose do-everything bench that I needed to mobilize, and I've always wanted to build a proper bench, possibly a Roubo.  Maybe in another 20 years [smile]  Oh and one other thing.........I've had a love/hate relationship with that tool til as it seems like any tool that I need is usually covered by a project that I'm working on and secured with bench dogs.  I'll delete that feature if I ever do another one.





« Last Edit: August 18, 2018, 08:31 PM by Dick Mahany »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline elm

  • Posts: 16
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #1 on: August 18, 2018, 07:08 PM »
Looks like a proper bench to me.  Put a new one on the back burner for another 20 years.  Do you have any before pics (or are you like me and forget to get those and just dive into the project)?

Agree on the smell of the finish.  I opened up some a few weeks ago and was surprised at how strong it was.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11559
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #2 on: August 18, 2018, 07:23 PM »
That is beyond beautiful!  And you have the memories of projects past.  Jealous as all heck.

Peter

Offline Birdhunter

  • Posts: 2355
  • Woodworker, Sportsman, Retired
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #3 on: August 19, 2018, 04:59 AM »
I’ve stopped using Watco unless the wood is very porous. I’ve switched to MinWax Wipe On Poly. It is truly wipe on, flattens well, doesn’t stink, dries quickly, and is durable.
Birdhunter

Offline Cheese

  • Posts: 5060
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #4 on: August 19, 2018, 10:24 AM »
Nice workbench... [thumbs up] [thumbs up]  With a Veritas on one end, a large Record on the other end and all that wood in between, you're good to go.  Very pretty, so after 20 years it deserves a kiss and a promise along with a sanding.

If that bench could only talk.  [smile]

Offline HarveyWildes

  • Posts: 792
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #5 on: August 19, 2018, 01:04 PM »
Looks pretty nice to me.  If it's still functional, just give it a little love every once in while to make sure the top stays flat and everything moves the way it's supposed to.  If you do make a new bench that you like better, make sure this one finds a good home.

I've got one old bench that I made 15-20 years ago, but it's still very functional.  I just built a new one last year  The new one has an MFT hole pattern in the top and a few Veritas goodies, but no drawers or shelves yet.  Looking at both the other day, I realized that the original is an old friend with history, and it will take a while for the new one to achieve that status.  I have one granddaughter who likes woodworking, and I hope to give the older bench to her one day - it's a little shorter and I think will be just right for her.
« Last Edit: August 19, 2018, 01:12 PM by HarveyWildes »

Offline Dick Mahany

  • Posts: 384
Re: Refinished Workbench & Ugly Casters after 20 Years
« Reply #6 on: August 19, 2018, 05:24 PM »
Thank you for the kind comments.  I don't have any pictures of the before condition, but that bench was used to rebuild many Holley carburetors and had the stains to show it.  It  also had some blue Deltron Polyurethane overspray on one side from when I painted the Landcruiser and the plastic cover accidentally blew off from the spray gun.  The front had splatter stains all over the drawer fronts and legs from when a can of oil stain fell off the top and onto the floor.

A few of my woodworker purist friends shamed me into refinishing it.  I hope to give it better treatment going forward as I have changed my ways [embarassed].   The dog holes are 3/4" and I was going to enlarge them to 20mm but I have a few Veritas dogs and clamps that need the smaller diameter.  For rough duty, I'll now use my MFT since the top is relatively easy to change if it gets damaged.
« Last Edit: August 31, 2018, 09:46 AM by Dick Mahany »