Author Topic: Slabs!  (Read 10310 times)

0 Members and 1 Guest are viewing this topic.

Offline Scott in Bend

  • Posts: 203
Re: Slabs!
« Reply #30 on: March 01, 2018, 02:17 PM »
Siberian Elm, formerly shading a neighborhood in Portland, OR.  Please forgive me for killing the edge.

Purchased the slabs from Salvage Works in Portland.  Milled and kiln dried, ready to sand.  Nice helpful folks, good selection and fair prices.

https://www.salvageworkspdx.com/

Top slab (left in picture) is 2" thick and the leg slab (right) is 2-1/2".

Final overall dimensions are 20" w x 48" l x 17" H

The legs were glued up to get the desired width and are joined to the top with three 14mm dominoes on each end.

Sanded up incrementally to P220g and finished with two coats of Osmo satin hard wax oil.  Green Scotch Brite pad (Viles) for first coat burnish and white pad on the second coat.

I used my TS75 saw with the 400 and 1900 rails along with a TSO GRS-16 guide rail square.  ETC EC 150/3 sander for sanding and rubbing in the oil.  Also, a Domino XL and MFT/3.

This was my first slab-style project and I anticipate doing some more.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jobsworth

  • Posts: 4991
  • Does Anyone Know What Time It Is?
Re: Slabs!
« Reply #31 on: March 01, 2018, 06:52 PM »
Scott,

yer Killing me. Im taking a ride up there next month and Im stopping in Hood river to visit some old friends. Now ya got me going a buying a load of reclaimed wood and a Slab.

Sheesh I gotta quit coming here its always cost me money  [scared]