Author Topic: Small pleasures, or what new in the East ...  (Read 157345 times)

0 Members and 1 Guest are viewing this topic.

Offline alkaline

  • Posts: 376
Small pleasures, or what new in the East ...
« on: May 18, 2014, 12:51 AM »
Slowly I take control of the playing surface
I made a storehouse of materials from the old bed ikea
and toolbar for more fun ...

Nice week to all!

alkaline

[smile] [wink] [smile]



I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #1 on: May 18, 2014, 12:59 AM »
Your shop is already much neater than mine. And I see a lot of 'green' in there.

Very nice!
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #2 on: May 18, 2014, 02:28 AM »
Your shop is already much neater than mine. And I see a lot of 'green' in there.

Very nice!

Thank you very much for such recognition, wow.
I spent organizing this space a couple of hours last week. My family loves the color green.

[wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline jobsworth

  • Posts: 4572
  • Burger Babe Says: I Even Buy Green Bananas
Re: Small pleasures, or what new in the East ...
« Reply #3 on: May 18, 2014, 02:35 AM »
Beautiful kitchen,

I you you to come and organize my shop.

You did a great job
Loving the Calif sun....

Offline PaulMarcel

  • Posts: 1451
    • Voilà, my blog
Re: Small pleasures, or what new in the East ...
« Reply #4 on: May 18, 2014, 03:11 AM »
Excellent work; very nice before/after
Visit my blog for Festool adventures
(okay! now the link works!)
Shirt size: L [cool]
Twitter: @HalfInchShy

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #5 on: May 18, 2014, 03:40 AM »
Many thanks to you.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline NYC Tiny Shop

  • Posts: 932
    • jamesfinndesign.com
Re: Small pleasures, or what new in the East ...
« Reply #6 on: May 18, 2014, 06:24 AM »
Great job!

Offline sgt_rjp

  • Posts: 92
Re: Small pleasures, or what new in the East ...
« Reply #7 on: May 18, 2014, 08:42 AM »
I've been thinking of doing shelves like that, I'm assuming you used dominos.    Is that one big domino or two smaller ones.  I'd like to keep mine adjustable so considering gluing the domino in the bracket, but putting a screw or pin in from the side of the standard. 

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #8 on: May 18, 2014, 01:54 PM »
Nice kitchen as well. I love the calla lilies - they're my favorite flower!
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #9 on: May 21, 2014, 01:47 PM »
I've been thinking of doing shelves like that, I'm assuming you used dominos.    Is that one big domino or two smaller ones.  I'd like to keep mine adjustable so considering gluing the domino in the bracket, but putting a screw or pin in from the side of the standard. 

Yes I used dominoes pin 14x140 mm on each shoulder (see sketch). I like to save the cost of materials, but it is also test for me how long withstand the domino.
If I want adjustment system, I would use steel instead of wood, e. g.:

http://www.wh1.com/site/articledetail/why-do-i-need-cantilever-rack-for-my-operation

I'll get to this later.
Now it´s important that I was successful with cleaning up and I can finally work on my primary intention.

Nice day for all.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #10 on: May 25, 2014, 02:58 PM »
Today I had fun again.


 [smile] [smile] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #11 on: May 25, 2014, 03:02 PM »
...and finished cleaning.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #12 on: May 25, 2014, 03:04 PM »
Those 2 last pictures scream 'Christmas Card' to me.

That was a lot of work I'm sure. You should be proud...
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #13 on: May 25, 2014, 03:10 PM »
And a little photographed. With new lights it goes better.
Wow thank you.
I wish all green positive successful week.

 [thumbs up]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #14 on: May 27, 2014, 01:48 AM »
The story of a small bedroom.

[wink]





I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Larso

  • Posts: 128
Re: Small pleasures, or what new in the East ...
« Reply #15 on: May 27, 2014, 04:07 AM »
Wow! Perfect design well done and even better photos.

I want to go in my shed now,Wow!

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #16 on: May 31, 2014, 12:09 PM »
let's give a chance floor
- introduction


 [smile] [wink] [smile]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #17 on: May 31, 2014, 12:15 PM »
Wow! Perfect design well done and even better photos.

I want to go in my shed now,Wow!


Thank you very much Lars, I believe that you shed your work equally happy.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline es07Eric

  • Posts: 191
    • www.ericllanesphotography.com
Re: Small pleasures, or what new in the East ...
« Reply #18 on: May 31, 2014, 11:39 PM »
Very nice… all the way around!   [big grin]
KS 120 | TS 75 EQ | PS 420 EBQ | OS 400 EQ | OF 1400 EQ | MFK 700 EQ | HL 850 E | DF 500 Q | RO 150 FEQ | RO 90 DX FEQ | ETS 150/3 EQ | ETS 125 EQ | PRO 5 LTD | PDC 18/4 | CXS | CT 26 E | CT MIDI | CT SYS | Boom Arm | MFH-1000 | WCR 1000 | MFT/3 | CMS-VL | FS 3000 | FS 1900 | FS 1400 | FS 1400 LR 32 | FS 1080 | LR 32 | SurFix |

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #19 on: June 02, 2014, 01:30 PM »
Very nice… all the way around!   [big grin]


Oh. Thank you very much for visiting Eric. I will give one an older, perhaps closer to you. I tried to express her joy of a new toy.

All the best to you.

« Last Edit: June 02, 2014, 01:34 PM by alkaline »
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #20 on: June 07, 2014, 05:45 PM »
 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #21 on: June 10, 2014, 01:03 PM »
Where I stopped writing.
I have the old linoleum has made five layers of polymer. And I must say God bless America for the company Butchers. Just do not know why it sold to the Netherlands. But nothing.

I took the production of several closets and kitchens. It will be more than 300 parts. Nothing for Festool tools. It is with him, I can do fine pushcart on the necessary material. and I did. a total of 15 hours of work. I'm worth it. It's fine. Although with what awaits him look like fun.
Racks of bed IKEA fill white plate. (We will see what can withstand 14 mm domino pins.) And next room also full of material. I look forward to when it starts. Before but I have to finish the annual report. Brr!

The next two photos. Shortening domino pins and how it looks when the vacuum cleaner becomes blocked at work.

Good day to you, friends!

 [smile] [smile] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #22 on: June 12, 2014, 04:32 PM »
The first day:


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #23 on: June 14, 2014, 03:16 PM »
Second day,

Today I have fun ...
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #24 on: June 14, 2014, 03:17 PM »
I added stocks ...
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #25 on: June 14, 2014, 03:19 PM »
and I made you happy.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #26 on: June 28, 2014, 01:45 AM »
Last week I was pretty busy at work. I did not have much time to play with Festool. Well at least I have a little thing moved forward. Nice weekend everyone.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline PaulMarcel

  • Posts: 1451
    • Voilà, my blog
Re: Small pleasures, or what new in the East ...
« Reply #27 on: June 28, 2014, 02:39 AM »
Nice photos and nice built-in.  Love how the whole project barely fit in the elevator :)  Me? Guaranteed it would have been a bit too long... my luck :)
Visit my blog for Festool adventures
(okay! now the link works!)
Shirt size: L [cool]
Twitter: @HalfInchShy

Offline woodguy7

  • Posts: 2727
Re: Small pleasures, or what new in the East ...
« Reply #28 on: June 28, 2014, 10:42 AM »
Really like the kitchen, any more pics ?

If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #29 on: June 28, 2014, 07:05 PM »
Nice photos and nice built-in.  Love how the whole project barely fit in the elevator :)  Me? Guaranteed it would have been a bit too long... my luck :)

Thank you Paul. We're not even half of the project. So I hope that this lift can handle.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #30 on: June 28, 2014, 07:10 PM »
Really like the kitchen, any more pics ?



I'm glad. Thank you very much. There is always some photos.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #31 on: July 06, 2014, 02:40 AM »
Recent Events can not be called otherwise than Walnut Madness.
Some people say that with a little possibilities you can not accomplish great things. I do not listen to them. Work begins with small service...
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #32 on: July 06, 2014, 02:44 AM »
I have a huge respect for the wet processes. I Therefore he called Technoviking. It is me brother from Phoenix Legion. Nobody does it with metal and paint better than him. I plan to learn something. First, however, will help me with a slight modification handles.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #33 on: July 06, 2014, 02:47 AM »
For application handles and also spraying needs new equipment. Are made quickly and on the fly.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #34 on: July 06, 2014, 02:49 AM »
Meanwhile begins to grow kitchen.

Successful week, friends

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #35 on: July 06, 2014, 04:51 AM »


So much pleasure in following this thread, and now real Coffee too!
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline BMH

  • Posts: 362
Re: Small pleasures, or what new in the East ...
« Reply #36 on: July 06, 2014, 09:10 AM »
Amazing work thank you for sharing.

Bruce

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #37 on: July 06, 2014, 10:57 PM »
Amazing work thank you for sharing.

Bruce

Thank you Bruce.  I'm glad you like it.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #38 on: July 06, 2014, 11:04 PM »


So much pleasure in following this thread, and now real Coffee too!

Thanks. This is a gem from Luigi Bezzera - father espresso machines. His name is Giulia. My friend became the happy owner of two years ago and asked me a few photos.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #39 on: July 12, 2014, 04:25 AM »
It is not pleased to rewrite the finished job. However, something changed and I have to cut one box and shortened. Let's do it!
But small glossy white cabinet in the hallway will be nice.
At the end of one small detail, we strongly recommend that you purchase. You will not regret it.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #40 on: July 28, 2014, 01:08 PM »
I took my family on few days to the sea. Before leaving not enough time to insert images with the result of the work. So at least now.
But while I was away I received shipment of new toys. So I returned today with a car full of goodies. I wish you a nice week.

 [smile] [wink] [smile]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Linbro

  • Posts: 202
Re: Small pleasures, or what new in the East ...
« Reply #41 on: July 29, 2014, 12:10 AM »
Very nice work, alkaline. That 'shipment' also looks very, very nice!
Lincoln.

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #42 on: July 29, 2014, 01:46 AM »
Where - exactly - is your vehicle parked? I would like to do some shopping...and I think you have just what I need!

 [big grin]
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #43 on: July 29, 2014, 05:40 AM »
Very nice work, alkaline. That 'shipment' also looks very, very nice!
Lincoln.

Thank you for your words, Lincoln.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #44 on: July 29, 2014, 05:42 AM »
Where - exactly - is your vehicle parked? I would like to do some shopping...and I think you have just what I need!

 [big grin]

Mr. Wow, My thanks for the morning smile. I believe that better suits your intention to visit some Mr. Frank. Particularly with regard to wide range offering. But anyway, I'm going to share my joy with nascent grinding section. Wonderfull still life, you say?

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #45 on: July 29, 2014, 08:27 AM »


Please tell us more about the 'Landy' in the avatar.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline dwilson143

  • Posts: 10
Re: Small pleasures, or what new in the East ...
« Reply #46 on: July 30, 2014, 01:07 AM »
Awesome work Akaline! You have a great eye for detail!  [big grin]

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #47 on: July 30, 2014, 05:03 AM »
What's that beltsander systainer you got there?
I have tried to find it online, but no show.
Is that no longer in production?

Looking at your picture the parts number is 493801

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #48 on: July 30, 2014, 06:39 AM »
What's that beltsander systainer you got there?
I have tried to find it online, but no show.
Is that no longer in production?

Looking at your picture the parts number is 493801
Perhaps-

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/570222/SubProducts/570222

  [smile]
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #49 on: July 30, 2014, 07:01 AM »
But small glossy white cabinet in the hallway will be nice.

Beautiful work.
What finish/ paint is on the white cabinets. They look really good.
Tim

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #50 on: July 30, 2014, 07:07 AM »
and I made you happy.

Nice spray Sata spray gun and setup...the Festool of spray equipment.
Tim

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #51 on: July 30, 2014, 07:33 AM »
What's that beltsander systainer you got there?
I have tried to find it online, but no show.
Is that no longer in production?

Looking at your picture the parts number is 493801
Perhaps-

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/570222/SubProducts/570222

  [smile]

No it's not the BS105 systainer, it is as wide as a normal one which is stacked beneath the mistery systainer.
It's also a different article number.

I think it is an older systainer containing a selection of belts but is no longer available anymore.
Just a guess...

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #52 on: July 30, 2014, 08:17 AM »
What's that beltsander systainer you got there?
I have tried to find it online, but no show.
Is that no longer in production?

Looking at your picture the parts number is 493801
Perhaps-

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/570222/SubProducts/570222

  [smile]

No it's not the BS105 systainer, it is as wide as a normal one which is stacked beneath the mistery systainer.
It's also a different article number.

I think it is an older systainer containing a selection of belts but is no longer available anymore.
Just a guess...


Well this might be closer to what you are thinking, but still not number you quote/see. Could not find this systainer on UK site and Aust site shows number available as critically low.

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/490752/SubProducts/490752
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #53 on: July 30, 2014, 11:59 AM »
What's that beltsander systainer you got there?
I have tried to find it online, but no show.
Is that no longer in production?

Looking at your picture the parts number is 493801

This systainer I received when buying grinders in 2010. Was a set with accessories for stationary work. This year was the very generous to on sets, at least in our country. For example, Rotex 150 was sold in one systajner with polishing set including a paste. And the T12 I was getting two sets of bits and drill bits.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #54 on: July 30, 2014, 12:22 PM »


Please tell us more about the 'Landy' in the avatar.

Landy's avatar is a car that belongs to a fleet of vehicles for the fun safari ride for tourists some African island. Owner of the business as a former member of the SAS apparently prefers this brand before Toyota.
And it likes me.

 [smile] [smile] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #55 on: July 30, 2014, 12:26 PM »
Awesome work Akaline! You have a great eye for detail!  [big grin]

Thank you very much.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #56 on: July 30, 2014, 12:51 PM »
But small glossy white cabinet in the hallway will be nice.

Beautiful work.
What finish/ paint is on the white cabinets. They look really good.
Tim

Thank you very much, white cabinets on the work of professional painter. I am a beginner in this work. I myself painting only a veneer varnished parts. But I am glad that you like the result.
As regards the material itself is a few layers of paint for cars polished to a high gloss.
It is in our country just enough trends, especially in conjunction with a minimalist design. Therefore now more able painters sprayed more  furniture board than vehicle bodies.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #57 on: August 02, 2014, 07:02 PM »
Today I made the first self-injection. It has been shown that in a few details. 1.8 nozzle is excellent for the first two layers of the base (fill points). Surface using DTS 400 and 400 grit Brilant were as smooth as glass. Here I must mention that the work itself DTS 400 I was surprised. Whereas it is only 2 mm stroke I was expecting much more delicate operation, the opposite is true. Spray paints itself using the same nozzle had noticeable signs from the beginning that what we call orange, typical for car refinishing paints lower price range. I did three coats. Tomorrow will come into action a new player. This set was too long lie in store so I got a super price. I do not take pleasure in advance. One more thing.  Poor access to edges caused by poor quality of their surface. I quickly made ​​the one tool that I hopefully improve this part of the work.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #58 on: August 03, 2014, 06:48 AM »
Today, I would not write about a little comforted. My joy is immense. I hit a few grains of dust. Then I used abrasive in 1500 and 3000, this time from 3M. Wipe away any remaining dust gray cloth Festool, then polished and paste Festool 8000 sheep fleece. Everything on medium speed. Soft start polisher is amazing. Finally Festool and green microfiber cleaning agent from the set.
The result? If I say that the surface is better than the one I bought It sounds can be immodest, but it's true. I do not know if it is possible to judge from the accompanying photos. What I know is that I'm doing new project itself. And thanks to my teacher in addition to (Technoviking) is the only Tim, your question is move me forward.
Finally, the perspective belongs to the kitchen. I used two layers of base ROBERLO (Spain) and three two-component car paint. I do not know the manufacturer, procure me a colleague. Finally, maintenance gun is not as difficult as I expected.
I wish you all a successful week.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #59 on: August 04, 2014, 09:54 AM »
Those panels look fabulous.
Take care if you are using solvent based post catalyzed coatings.
Tim

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #60 on: August 08, 2014, 08:09 AM »
Jep, they look super.
You can add a new skill to your list  [smile]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #61 on: August 23, 2014, 04:24 AM »
...painting. Completely absorbed me. So addictive.


Nice weekend everyone!

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #62 on: August 26, 2014, 11:14 PM »
Yesterday was a nice day. I took time off work, and I little of ventilate themselves and Kapex.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #63 on: August 31, 2014, 05:52 PM »
I would like to add a notes VAC SYS:
- I was surprised by its effectiveness. Vacuum is so great that over 18 mm MDF board can still feel the effects on others, laid on top of her,
- shivering, fixed piece is minimal.
- The basic module suction cup mounting is excellent,
- The small suction cup mounting reduces the efficiency, we see it as a direct proportion.
- At 200 x 60mm I registered a slight sliding, fixed object,
- Brilliant handling skills, finally when routing rows of holes I do not have to rotate the board, the same applies when using Lamello cutter. This fact significantly speeds up work on the stage for medium-sized corpora cabinets,
- Operations such as sawing and working with a chisel handles excellently,
- Height allows cooperation with clamps Festool system,
- Control of foot-operated switch is appropriate to fix the floor,
- Do not drop, fixed piece, shortly after turning off the pump,
- The location of the switch on the side systajneru given the usual storage systajnerov little awkward,
My overall impression surpassed expectations with whom I went to his purchase.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Runhard

  • Posts: 734
Re: Small pleasures, or what new in the East ...
« Reply #64 on: August 31, 2014, 10:04 PM »
Awesome pictures! I enjoy following this thread. Keep up the good work  [thumbs up]
Daniel

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #65 on: August 31, 2014, 10:12 PM »
Awesome pictures! I enjoy following this thread. Keep up the good work  [thumbs up]

Many thanks!

  [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #66 on: September 01, 2014, 05:18 PM »
Today I just played. The result is the prototype. If it will work, I will sprayed surface color and also add sticker FESTOOL FAN course.

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #67 on: September 01, 2014, 06:54 PM »
Pretty slick!

How is it working so far? Too high? Too low? Just right?
Trying to be one of the most helpful members on the FOG.

Offline es07Eric

  • Posts: 191
    • www.ericllanesphotography.com
Re: Small pleasures, or what new in the East ...
« Reply #68 on: September 02, 2014, 11:59 PM »
This is just spectacular in so many ways!   [thumbs up]

How are you treating the  "fuzzy" ends of the MDF so they will accept paint?

Thanks for sharing!

Cheers,
Eric
KS 120 | TS 75 EQ | PS 420 EBQ | OS 400 EQ | OF 1400 EQ | MFK 700 EQ | HL 850 E | DF 500 Q | RO 150 FEQ | RO 90 DX FEQ | ETS 150/3 EQ | ETS 125 EQ | PRO 5 LTD | PDC 18/4 | CXS | CT 26 E | CT MIDI | CT SYS | Boom Arm | MFH-1000 | WCR 1000 | MFT/3 | CMS-VL | FS 3000 | FS 1900 | FS 1400 | FS 1400 LR 32 | FS 1080 | LR 32 | SurFix |

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #69 on: September 03, 2014, 08:44 PM »
...same applies when using Lamello cutter.

Really nice "retro" Lamello cutter. I like it, proof that quality tools last a long time.
Tim

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #70 on: September 13, 2014, 02:47 PM »
Pretty slick!

How is it working so far? Too high? Too low? Just right?

It will soon be seen Wow, while I think it could work.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #71 on: September 13, 2014, 02:48 PM »
This is just spectacular in so many ways!   [thumbs up]

How are you treating the  "fuzzy" ends of the MDF so they will accept paint?

Thanks for sharing!

Cheers,
Eric


Your words have enjoyed Eric. The surface color will get soon.

 [wink]
 
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #72 on: September 13, 2014, 02:49 PM »
...same applies when using Lamello cutter.

Really nice "retro" Lamello cutter. I like it, proof that quality tools last a long time.
Tim

Yes Tim. The viability of this tool  prevents me purchase smaller dominoes. Moreover Lamello I bought twelve years back in sale for a really ridiculous price of about $ 10.


 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #73 on: September 13, 2014, 03:06 PM »
This project is in the color of vanilla, is already manufactured exclusively in my small workshop. And this is the same painting parts and melamine components. To achieve the perfect edge I used cutting with the addition of 1.5 mm and then routing edges. Technoviking help me in painting and polishing and it was a pleasure to observe his work. I devoted the rest and assembly. Hooks for hanging is domestic choice.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #74 on: September 13, 2014, 03:14 PM »
...and few pictures from the kitchen


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Cross-cut Canuck

  • Posts: 133
Re: Small pleasures, or what new in the East ...
« Reply #75 on: September 13, 2014, 03:40 PM »
Awesome work!!! and pictures too! [thumbs up]

I hope some day I can achieve your quality of craftsmanship.  Im currently trying to figure out how to organise the mess and lay out in my garage so I can . I hope you don't mind but I'm going to borrow your idea of how your store your guide rails neatly in one spot. Seems like sweet organized space saver to me.  [not worthy]

Cheers
--- MY GREATEST FEAR IS WHEN I DIE, MY WIFE WILL SELL MY TOOLS FOR WHAT I TOLD HER I PAID FOR THEM ---

Lots of Green Stuff and Green things and a few odds and ends...

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #76 on: September 14, 2014, 02:56 PM »
Awesome work!!! and pictures too! [thumbs up]

I hope some day I can achieve your quality of craftsmanship.  Im currently trying to figure out how to organise the mess and lay out in my garage so I can . I hope you don't mind but I'm going to borrow your idea of how your store your guide rails neatly in one spot. Seems like sweet organized space saver to me.  [not worthy]

Cheers

I feel pleasure that something from my pictures is for your inspiration. I wish you every success in building your workshop.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #77 on: September 16, 2014, 04:37 PM »
...small return to the scene of crime...

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #78 on: September 16, 2014, 09:01 PM »
The finish on those pieces is fantastic!
Thanks for posting.
Tim

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #79 on: September 16, 2014, 11:27 PM »
Alkaline:

Is that 'W' shaped item a bookshelf, or just decorative? Also, how did you fasten it to the wall?
Trying to be one of the most helpful members on the FOG.

Offline es07Eric

  • Posts: 191
    • www.ericllanesphotography.com
Re: Small pleasures, or what new in the East ...
« Reply #80 on: September 17, 2014, 12:22 AM »
alkaline, how do you finish the edges?  That shelf looks really awesome and I want to give painting MDF a go, but I'm still a bit confused on how to treat the edges.

Thanks!
KS 120 | TS 75 EQ | PS 420 EBQ | OS 400 EQ | OF 1400 EQ | MFK 700 EQ | HL 850 E | DF 500 Q | RO 150 FEQ | RO 90 DX FEQ | ETS 150/3 EQ | ETS 125 EQ | PRO 5 LTD | PDC 18/4 | CXS | CT 26 E | CT MIDI | CT SYS | Boom Arm | MFH-1000 | WCR 1000 | MFT/3 | CMS-VL | FS 3000 | FS 1900 | FS 1400 | FS 1400 LR 32 | FS 1080 | LR 32 | SurFix |

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #81 on: September 18, 2014, 12:48 AM »
As everybody said, the finish is just great!!
Also the clients enviroment looks high end, I see the work is too [eek]

There are several products that seal the edges on mdf.
They work really well, and give it the same finish as the top.
Look and ask at a paint specialist, sure they have it.

Offline GOT8SPD

  • Posts: 228
Re: Small pleasures, or what new in the East ...
« Reply #82 on: September 18, 2014, 10:23 AM »
FANTASTIC WORK ALKALINE!

I have a question...is there a clear coat on the wood or is it just glossy paint, then sanded?  I love that glossy look.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #83 on: September 18, 2014, 03:39 PM »
The finish on those pieces is fantastic!
Thanks for posting.
Tim

Thank you Tim. Your words are support for me for next work.

[wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #84 on: September 18, 2014, 03:40 PM »
Alkaline:

Is that 'W' shaped item a bookshelf, or just decorative? Also, how did you fasten it to the wall?

Mr. Wow, in our work we do not make anything just for show. Shelf can hold a load of books weighing 15 kg. Is fixed two invisible brackets that are on the market under the name REX.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #85 on: September 18, 2014, 04:17 PM »
alkaline, how do you finish the edges?  That shelf looks really awesome and I want to give painting MDF a go, but I'm still a bit confused on how to treat the edges.

Thanks!

Eric, I'm flattered. Thank you. The way I started this work is in part described on the previous pages of this thread.
I use material designed for the automotive industry, namely polyester filler and primer filler from ROBERLO and high gloss two-component polyurethane paint for metal.
L5403493 the picture you can be seen locally sealed with edges, resulting from inaccurate work sawing and gluing the resulting shaped shelves (in this I still have room for improvement).
By hand or with DTS 400 (with using 350 to 400 abrasive) make it a perfect edges.
Followed by injection of 3 layers of filler. He is finalized abrasive 800.
Next step is sprayed color and layer 4 in edge and 2-3  on the surface. After curing ( I use two heaters with a temperature of about 50 degrees Celsius) followed by grinding under water with detergents for sediment alleviate. Using 1500, 3000 and 6000 - 3M abrasives.
After sanding, followed polish MPA 6000 or 8000 with orange and dark gray plastic foam using the Rotex 150. Last action is polishing sheepskin using SHINEX RAP 150 and 11000 MPA.
I hope to understand me.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #86 on: September 18, 2014, 04:30 PM »
As everybody said, the finish is just great!!
Also the clients enviroment looks high end, I see the work is too [eek]

There are several products that seal the edges on mdf.
They work really well, and give it the same finish as the top.
Look and ask at a paint specialist, sure they have it.

Thank you. Someone recommended edges sealed with tape of the some material. I do not do it. I believe that the MDF for indoor use is sufficiently dimensionally stable. But in the context of further improving the quality I also does not prevent this practice. It also I considers the use of two-component epoxy adhesives is maybe progress.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #87 on: September 18, 2014, 04:36 PM »
FANTASTIC WORK ALKALINE!

I have a question...is there a clear coat on the wood or is it just glossy paint, then sanded?  I love that glossy look.


Thank you. Yes it is a glossy car paint additionally polished. For the future I considering the use of conventional paint with several layers of transparent paint, which will contain trace amounts of black pigment for better clarity.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #88 on: September 24, 2014, 06:07 AM »
Small soothing break in the working day with the scent of olives.

I wish you all a nice day !


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #89 on: October 04, 2014, 03:12 AM »
Something starts during the day, but must be completed at night,  to next day was fine.

Nice weekend to all !


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline es07Eric

  • Posts: 191
    • www.ericllanesphotography.com
Re: Small pleasures, or what new in the East ...
« Reply #90 on: October 06, 2014, 11:18 PM »
Nice work as usual!!!   [not worthy]

Did you use the HL850 with a fine cutter on the insides of the boxes?

Thanks,
Eric
KS 120 | TS 75 EQ | PS 420 EBQ | OS 400 EQ | OF 1400 EQ | MFK 700 EQ | HL 850 E | DF 500 Q | RO 150 FEQ | RO 90 DX FEQ | ETS 150/3 EQ | ETS 125 EQ | PRO 5 LTD | PDC 18/4 | CXS | CT 26 E | CT MIDI | CT SYS | Boom Arm | MFH-1000 | WCR 1000 | MFT/3 | CMS-VL | FS 3000 | FS 1900 | FS 1400 | FS 1400 LR 32 | FS 1080 | LR 32 | SurFix |

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #91 on: October 07, 2014, 12:44 AM »
Thank you Eric, I already bought the board in this version.


 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #92 on: October 10, 2014, 05:27 AM »
Although must admit that I underestimate shade of blue, I feel like a real fan of Festool.


 [not worthy] [thumbs up] [not worthy]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #93 on: October 18, 2014, 03:13 AM »
I like to share some photos from preparation for the production of a few massive pieces that represent my debut in the world of real wood. I duly excited in anticipation of the outcome.
To be continued

Nice weekend to all!

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #94 on: October 18, 2014, 03:39 AM »
Holy Giant Trammel, BatMan?! Talk about custom fixturing for a job - you've really gone to great lengths...no pun intended!

May I ask what that is going to be? I'm guessing some sort of store display?
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #95 on: October 18, 2014, 03:44 AM »
Holy Giant Trammel, BatMan?! Talk about custom fixturing for a job - you've really gone to great lengths...no pun intended!

May I ask what that is going to be? I'm guessing some sort of store display?

Mr. Wow, I can say that I plan to construct a massive seating teak. Details will see shortly.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #96 on: October 18, 2014, 04:09 AM »
Holy Giant Trammel, BatMan?! Talk about custom fixturing for a job - you've really gone to great lengths...no pun intended!

May I ask what that is going to be? I'm guessing some sort of store display?

Mr. Wow, I can say that I plan to construct a massive seating teak. Details will see shortly.

 [wink]

Very cool. I will be waiting to see your next creation!
Trying to be one of the most helpful members on the FOG.

Offline PreferrablyWood

  • Posts: 868
Re: Small pleasures, or what new in the East ...
« Reply #97 on: October 19, 2014, 10:31 AM »
Nice arc, I think it suits the usage, and the material..exclusive...
850 HL E Planer rustic head standard head angle fence, MFS 400x2, MFS extensions MFS VB 700 x 1 MFS VB 1000 x 2 . CMS GE, sliding fence, VB and 2x VL extension tables, OF 2200, Accessory Set ZS OF 2200 M,36mm 5m antistatik hose, CMS OF+ CMS TS 75 insert modules. SYS-MFT Fixing-Set,  3.5m sleeved hose, Syslite duo, Sys 4 sort 3 x3, Sys Roll, Sys 1 Box x2 , classic Sys 3-Sort 4, classic Sys 3 Sort 6 x2, Sys Cart x3 Systainer 4 x2  as toolbox with selfmade inserts Systainer 5 as toolbox with insert.
Festool 18V HKC 55 Li 5.2 EB Plus FSK 420,FSK 250, Extra blade for the HKC 55 W32.TI 15, CXS 2.6 Ah version, RO 90 DX, PDC 18/4 plus DC UNI FF depth stop chuck,AD 3/8 square socket holder FF chuck, Centrotec Bits; -->Bit holder and bit selection BHS 65 CE TL 24x, ,Bradpoint DB WOOD CE SET ,Zobo (Forstner) D 15-35 CE-Zobo SET ,Masonary/stone bits DB STONE CE Set,Extender BV 150 CE, Countersink QLS D2-8 CE Hook turner HD D18, end centrotec<--.  TS 75 EBQ, PSC 420, OF 1010, RS 300 EQ, CTL Midi, MFT 3, Parf dogs x2pair +Bench dogs x2pair, FS 1080, FS 1900 .  will get Domino DF 700 XL,  CMS insert BS 120 Belt sander.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #98 on: October 30, 2014, 05:09 PM »
... some of the preparatory phase. I hope that over the weekend we will have the first pieces. Teak is a wonderful material.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #99 on: November 06, 2014, 06:27 PM »
...next phase...


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Cross-cut Canuck

  • Posts: 133
Re: Small pleasures, or what new in the East ...
« Reply #100 on: November 06, 2014, 06:59 PM »
dude, your like a festool jedi, awesome work
--- MY GREATEST FEAR IS WHEN I DIE, MY WIFE WILL SELL MY TOOLS FOR WHAT I TOLD HER I PAID FOR THEM ---

Lots of Green Stuff and Green things and a few odds and ends...

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #101 on: November 14, 2014, 05:14 PM »
... now I like it and i see end this project,  is near.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline WastedP

  • Posts: 343
Re: Small pleasures, or what new in the East ...
« Reply #102 on: November 15, 2014, 04:29 PM »
This is fantastic work.  The photography is amazing.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #103 on: November 21, 2014, 05:35 AM »
in pink tones this morning I was convinced that everything is ok. Now I make the other side, and two tables. Nice weekend to all.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #104 on: November 24, 2014, 03:12 PM »
From this jigsaw coughed also KAPEX.


 [tongue]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Rhynix

  • Posts: 4
Re: Small pleasures, or what new in the East ...
« Reply #105 on: December 03, 2014, 01:59 PM »
Very nice!

I love your workshop!
TS55 EBQ-plus, FS-1400, RO150, DTS400EQ-plus, PS300EQ, ETS150/5, CXS Li 2.6, OF1010 EBQ-plus set

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #106 on: December 04, 2014, 05:28 AM »
Hello Rhynix
Thank you. I like it too, but it seems that soon I will have a problem with space.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline BMH

  • Posts: 362
Re: Small pleasures, or what new in the East ...
« Reply #107 on: December 04, 2014, 08:58 AM »
Love the design of the bench and the workmanship involved. Question; how is the wood expansion contraction is going to affect the miter joints at the corner?

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #108 on: December 04, 2014, 09:25 AM »
I just chose teak with respect to dimensional stability, I hope I will not disappoint. The internal parts are made with dimensions a few tenths of a millimeter smaller. The visual side is completely masked Sikaflex DC 290th
But the truth is that only time will tell as to maintain. In the extreme case I see a solution in its application to the miter.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Michael Kellough

  • Posts: 3040
Re: Small pleasures, or what new in the East ...
« Reply #109 on: December 04, 2014, 01:27 PM »


Not that you need any help from me, you are clearly an outstanding craftsman, but you would get more accuracy if you put the short leg of the protractor against the wood and align the long leg to the pencil line by eye .

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #110 on: December 07, 2014, 03:31 AM »


Not that you need any help from me, you are clearly an outstanding craftsman, but you would get more accuracy if you put the short leg of the protractor against the wood and align the long leg to the pencil line by eye .


I am enthusiast more than craftsman. But I'm trying to improve. Therefore, I am grateful for each comment. Thank you for your response. Have a nice day.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #111 on: December 12, 2014, 07:54 AM »
...some pictures from today. Are only from phone.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #112 on: December 12, 2014, 09:29 AM »
I'll bet there's an interesting story behind that table. Please share it?
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #113 on: December 16, 2014, 03:54 PM »
I'll bet there's an interesting story behind that table. Please share it?


 I will finish the work and then tell you a story. Now I will say only that the table is not only one.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Toxiq

  • Posts: 26
Re: Small pleasures, or what new in the East ...
« Reply #114 on: December 19, 2014, 09:06 AM »
Dobrý den...

I was reading this topic with a lot of interest en just by the last post I noticed youre location, SK

My wife is from SK, we live in holland and at this moment her parents are here, so I had to show my father in law some slovakian work as he just smiled and said, what else you expect from a slovakian haha.

Where you from ?
They use to live in poprad, now they live in Bytca (near zillina) and we visit them 2 or 3 times per year (I love it there)

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #115 on: January 19, 2015, 11:15 AM »
...finish.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline mike_aa

  • Posts: 984
Re: Small pleasures, or what new in the East ...
« Reply #116 on: January 19, 2015, 11:20 AM »
That is really nice.  Thands for sharing!

Mike A,

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Small pleasures, or what new in the East ...
« Reply #117 on: January 19, 2015, 11:24 AM »
WOW - that's VERY nice. It almost looks like it was custom designed for that spot...

 [wink] [thumbs up] [not worthy]
Trying to be one of the most helpful members on the FOG.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #118 on: May 08, 2015, 01:57 AM »
Oh WOW, you were the big man on the forum but if in real life. Rest in peace. Honor your memory.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #119 on: May 08, 2015, 02:01 AM »
Greetings to all. After a small working pause came again  time for fun. I begin this table where I used teak wood residues.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Runhard

  • Posts: 734
Re: Small pleasures, or what new in the East ...
« Reply #120 on: May 08, 2015, 09:49 AM »
That is awesome work as usual!
Daniel

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5506
Re: Small pleasures, or what new in the East ...
« Reply #121 on: May 08, 2015, 10:01 AM »
Nice table. Is that a solar panel that works as a USB charger for a phone?

Offline iamnothim

  • Posts: 1423
Re: Small pleasures, or what new in the East ...
« Reply #122 on: May 08, 2015, 11:34 AM »
...finish.

 [wink]

The table/bench is Over-the-top Incredible!

Also
I had been thinking about a sheet goods cart and There It Is !!!!
b.o.o.k.m.a.r.k.
My reputation pre-deceases me.

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #123 on: May 09, 2015, 10:31 AM »
Nice table. Is that a solar panel that works as a USB charger for a phone?

Cool idea if it is (a solar panel). Great work as usual!  Very clever.
Thanks for posting.
Tim

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Re: Small pleasures, or what new in the East ...
« Reply #124 on: May 09, 2015, 01:34 PM »
so you can charge your cellphone while you sit by the pool
Greg Powers
Size:XL

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #125 on: May 12, 2015, 12:20 PM »
Thank you all. Yes it is a photovoltaic table. I toyed with the idea to produce a few more pieces ...


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #126 on: May 12, 2015, 01:01 PM »
Thank you all. Yes it is a photovoltaic table. I toyed with the idea to produce a few more pieces ...

Go for it. It a good idea.
Tim

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #127 on: June 07, 2015, 02:52 AM »
I apologize, I did not realize how it can be perceived my last post. But I certainly did not think to offer their work via the FOG and certainly not a member of FOG. It's funny but I feel honored. It will not not be repeated.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #128 on: June 07, 2015, 02:53 AM »
And now let us turn the page. But we remained at the table. My wife very amused when I told her, I will to make a new walnut table to the kitchen. She waited to it two years, but I respected the word. The woman had joy. And I was most pleased that the old table found a new owner.

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #129 on: June 07, 2015, 02:57 AM »
A few pictures... I wish you all a nice week.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #130 on: June 07, 2015, 03:02 AM »
It was beautifully spent time...
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #131 on: June 07, 2015, 03:05 AM »
...and I will be shall remember him with love.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #132 on: June 28, 2015, 10:06 AM »
A man came to me and brought a few pictures. So I looked at them. I hope that the result is right.

I wish you all a nice week.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline saweet

  • Posts: 15
Re: Small pleasures, or what new in the East ...
« Reply #133 on: June 28, 2015, 10:58 AM »
alkaline

Love your work especially the entertainment center. clean and modern

Offline Alex

  • Posts: 5506
Re: Small pleasures, or what new in the East ...
« Reply #134 on: June 28, 2015, 11:23 AM »
Yes, great work, nice and modern.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #135 on: July 01, 2015, 04:11 AM »
Thanks guys,

next for sharing. Melamine monster for storing clothes. Frankly, I did not start my collection festool for such projects, but occasionally will always friend for whom I am willing to go for it.

I wish you a successful day.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #136 on: September 06, 2015, 05:46 PM »
Hello all. This is some pictures from my last project.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline davetink

  • Posts: 32
Re: Small pleasures, or what new in the East ...
« Reply #137 on: September 06, 2015, 06:00 PM »
 [not worthy]  [not worthy] [not worthy] [not worthy]
What more can I say. I'm a huge fan of your work.

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #138 on: September 06, 2015, 06:02 PM »
As always great to see your posts and exceptional crafting.
« Last Edit: September 06, 2015, 06:06 PM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline WastedP

  • Posts: 343
Re: Small pleasures, or what new in the East ...
« Reply #139 on: September 07, 2015, 07:08 PM »
Every time I see this thread bumped up to the top with a new project, I am prepared to have my mind blown.  A rare and excellent combination of skill and creativity.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #140 on: September 26, 2015, 07:10 AM »
Huge thanks for your appreciation, dear friends! The gate is in place.

 [cool]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #141 on: September 26, 2015, 07:11 AM »
So I prepared a new entertainment.
Nice weekend everyone!!!

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #142 on: September 26, 2015, 07:16 AM »
...and several pictures

 [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #143 on: September 26, 2015, 01:55 PM »
Great looking work.
What kind of drawer runners are those?
That picture of the wine bottle cutouts on the router table looks unsafe.
Tim

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #144 on: September 26, 2015, 07:20 PM »
Huge thanks for your appreciation, dear friends! The gate is in place.

 [cool]

It is refreshing to see quality work.
That gate is stunning.

Offline Kev

  • Posts: 7647
Re: Small pleasures, or what new in the East ...
« Reply #145 on: September 26, 2015, 08:52 PM »
Great looking work.
What kind of drawer runners are those?
That picture of the wine bottle cutouts on the router table looks unsafe.
Tim

@Tim Raleigh

Something about pics like that give me that funny twinge too [blink]

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #146 on: September 27, 2015, 05:45 AM »
Great looking work.
What kind of drawer runners are those?
That picture of the wine bottle cutouts on the router table looks unsafe.
Tim

Hi Tim.
I used Tandem from BLUM version Tip-On for touch control.
Thank you for your care.
The kids cutter is only game. But seriously. Under low shot cca 1,5mm in a homogeneous material, such as MDF board really do not worry. All the more that he is a trained goldsmith and holds the extraordinary feel for the thing.

 [wink]
« Last Edit: September 27, 2015, 07:40 AM by alkaline »
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #147 on: September 27, 2015, 05:49 AM »
Huge thanks for your appreciation, dear friends! The gate is in place.

 [cool]

It is refreshing to see quality work.
That gate is stunning.

Thank you very much.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #148 on: September 27, 2015, 06:28 AM »
But even with the utmost care  comes occasionally to the accident.
Therefore, I declare:
For any work is importantly  SAFETY!

 [smile]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #149 on: September 27, 2015, 07:13 AM »
But now let us turn list.
surely you would agree that an essential contribution to safety in the workplace is the mainly system and order. From the beginning it is for me the most important. At present, order in my  workshop I can not boast. Chaos prevails over my endeavors.

 [unsure] [embarassed] [mad]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #150 on: September 27, 2015, 07:38 AM »
So, I'm considering building new space. This picture is my basic idea. I hope, soon I will show you its my first results. Nice Sunday everyone.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 1569
Re: Small pleasures, or what new in the East ...
« Reply #151 on: September 27, 2015, 11:50 AM »
New space looks great...remember chaos is the artist's best friend and inspiration

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #152 on: September 27, 2015, 02:08 PM »
But now let us turn list.
surely you would agree that an essential contribution to safety in the workplace is the mainly system and order.

I completely agree.
However, I really need to work on my self discipline.
When I do put things in their place and clean up it seems I actually spend more time doing that than actually making.
Tim

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #153 on: October 15, 2015, 05:50 PM »
First day...
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #154 on: October 16, 2015, 04:06 PM »
Second day...

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #155 on: October 17, 2015, 02:58 AM »
Impressive space. Will we see any wood based product in the Day 3 Post?

Looking fwd to further images.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #156 on: October 17, 2015, 10:47 AM »
Impressive space. Will we see any wood based product in the Day 3 Post?

Looking fwd to further images.

Hello Down Under.
I like to watch work this iron guys. I originally planned to wooden structure. But steel gives me more freedom to work with new toy.
And wood appeared on the scene soon. I plan to arrange one wine cellar.
Enjoy the weekend.

 [wink]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #157 on: October 19, 2015, 05:31 PM »
I think you will enjoy your new space very much, it looks well thought out.
Also nice to see your business grow in the past years to what appears to be a much more proffesional approach.
Now your shop can meet your level of woodworking  [big grin]

None of the steelworkers got "sun" burned by welding unprotected?

Offline Cheese

  • Posts: 3734
Re: Small pleasures, or what new in the East ...
« Reply #158 on: October 19, 2015, 06:55 PM »
Nice stuff. I'm looking forward to this build. I like metal.

What tools did you use to notch the beams?

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #159 on: October 24, 2015, 01:58 PM »
I think you will enjoy your new space very much, it looks well thought out.
Also nice to see your business grow in the past years to what appears to be a much more proffesional approach.
Now your shop can meet your level of woodworking  [big grin]

None of the steelworkers got "sun" burned by welding unprotected?

Thank you. These guys are a separate entity. They need to know what and how they are doing. Picture what I a shared, however, was the exception rather for the creation of interesting shots.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #160 on: October 24, 2015, 02:09 PM »
Nice stuff. I'm looking forward to this build. I like metal.

What tools did you use to notch the beams?

Thank you. Steel structure means freedom spaces below. And it is very good. Guys used the oxygen flame.
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #161 on: October 24, 2015, 02:22 PM »
But now the third day. And that means to me

Christmas [big grin]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Linbro

  • Posts: 202
Re: Small pleasures, or what new in the East ...
« Reply #162 on: October 24, 2015, 05:57 PM »
Very nice, Alkaline. Is that a 3 metre sliding table on the panel saw?

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #163 on: October 25, 2015, 02:46 AM »
Very nice, Alkaline. Is that a 3 metre sliding table on the panel saw?


Yes Linbro, more precisely 3200 millimeters. That is amazing. No more join rails. But even more amazing is parallelogram square. Words in any language I can not express what I experience now.


 [smile]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #164 on: October 31, 2015, 03:47 PM »
...a few other days 


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline WastedP

  • Posts: 343
Re: Small pleasures, or what new in the East ...
« Reply #165 on: October 31, 2015, 06:23 PM »
Please tell me more about this thing made of square and round tubing.

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #166 on: October 31, 2015, 08:42 PM »
Stairing at it...

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #167 on: November 01, 2015, 04:04 AM »
Yes, this is stairs. Although at this stage on the way up is still necessary to drink at least one Red Bull.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #168 on: November 07, 2015, 04:32 AM »
Today is pink not color my world. But we struggle on, because winter is comming.
Nice weekend to all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #169 on: November 22, 2015, 04:12 AM »
Hi all,
Only slow progress in building its vision. It's a fight. But I was able to ensure heat and light. So we can start working.
A few sentences to Kappa. It's an amazing machine. I put imported about cubic meter of  oak planks (55 mm) from the Austrian Alps. Cut up them like butter. Also automatic adjustment when cutting angles are fantastic.
Enjoy your Sunday.


 [wink]
« Last Edit: November 22, 2015, 04:21 AM by alkaline »
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #170 on: November 22, 2015, 06:16 AM »
Busy, Busy, Busy - getting it done, and continues to impress.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #171 on: November 22, 2015, 06:39 AM »
Your photography is noteworthy, espesically the B&W.

There are too many good ones for it to be accidential flash of brilliance.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #172 on: November 22, 2015, 04:16 PM »
Busy, Busy, Busy - getting it done, and continues to impress.

Hello Untidy Shop, in addition to doing the main work and the end of the year I am planning a few more projects. Extensive reconstruction of the old shed a little surprise for me. I finally decided this year to make only necessary that I could as soon as possible started the woodworking.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #173 on: November 22, 2015, 04:30 PM »
Your photography is noteworthy, espesically the B&W.

There are too many good ones for it to be accidential flash of brilliance.

Thank you for the kind words Holmz. I have some experience with photography. But truth is that most of them come from the iPhone. The best camera is the one that is always close at hand.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Linbro

  • Posts: 202
Re: Small pleasures, or what new in the East ...
« Reply #174 on: November 22, 2015, 06:46 PM »
Hello alkaline - is Austrian Oak a top quality timber? And, is it for a current project?
Lincoln.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #175 on: November 24, 2015, 12:15 PM »
Hello alkaline - is Austrian Oak a top quality timber? And, is it for a current project?
Lincoln.

Hello Lincoln,
I'm not a guy who says  the neighbor's garden is greener. [smile]
But this wood naturally dries more than 10 years. In my country usually dries the artificially and it is the source of most problems that arise from that.
Yes the next projects will be from this oak. Have a nice day you.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #176 on: November 24, 2015, 12:31 PM »
I would add, the source is a family company like Felder, which makes things very seriously and prides to itself . Maybe it looks a little old fashioned but I like it. Handshake for me was always more in store than paper with lawyer.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Cheese

  • Posts: 3734
Re: Small pleasures, or what new in the East ...
« Reply #177 on: November 26, 2015, 11:58 AM »
Looking good... [thumbs up], will there eventually be a railing for the spiral stairs?

What is the material being sawed in the photo below and what is it used for?


Offline Wuffles

  • Posts: 1313
Re: Small pleasures, or what new in the East ...
« Reply #178 on: November 26, 2015, 12:00 PM »
Looking good... [thumbs up], will there eventually be a railing for the spiral stairs?

What is the material being sawed in the photo below and what is it used for?

(Attachment Link)

Looks like a Thermalite (one brand of lightweight block, there are many) for a wall to me.
Tool list updated to reflect knowledge :: hammer, screwdriver, one pozi bit, and another bigger hammer.

Offline Cheese

  • Posts: 3734
Re: Small pleasures, or what new in the East ...
« Reply #179 on: November 26, 2015, 12:06 PM »
Thanks Wuffles...never heard of the stuff or have seen the stuff before.

Offline Wuffles

  • Posts: 1313
Re: Small pleasures, or what new in the East ...
« Reply #180 on: November 26, 2015, 12:07 PM »
Thanks Wuffles...never heard of the stuff or have seen the stuff before.

I use them in my strong-man act.
Tool list updated to reflect knowledge :: hammer, screwdriver, one pozi bit, and another bigger hammer.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #181 on: December 10, 2015, 03:34 PM »
Looking good... [thumbs up], will there eventually be a railing for the spiral stairs?

What is the material being sawed in the photo below and what is it used for?

(Attachment Link)

In our country, this material has the name of aerated concrete blocks.

https://en.wikipedia.org/wiki/Autoclaved_aerated_concrete


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #182 on: December 10, 2015, 03:35 PM »
Thanks Wuffles...never heard of the stuff or have seen the stuff before.

I use them in my strong-man act.

 [big grin] [big grin] [big grin]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #183 on: December 10, 2015, 04:28 PM »
Skip building workshops that I will show you how I can utilize waste. I used only new toy from felder and cordless screwdriver Hilti.

Nice evening

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Wuffles

  • Posts: 1313
Re: Small pleasures, or what new in the East ...
« Reply #184 on: December 12, 2015, 02:38 PM »
Skip building workshops that I will show you how I can utilize waste. I used only new toy from felder and cordless screwdriver Hilti.

Nice evening

 [wink] (Attachment Link)

Now I know where Ikea source those laundry baskets  [poke]
Tool list updated to reflect knowledge :: hammer, screwdriver, one pozi bit, and another bigger hammer.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #185 on: December 19, 2015, 09:11 AM »
Dear friend,

IKEA does not yet know about me...



 [big grin] [big grin] [big grin]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #186 on: December 25, 2015, 09:38 AM »



Made at the last minute. Christmas gift. Nice holidays to all.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline DB10

  • Posts: 908
Re: Small pleasures, or what new in the East ...
« Reply #187 on: December 25, 2015, 05:56 PM »
Your pictures really do tell a thousand words, nice work and happy holidays.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #188 on: December 26, 2015, 07:54 AM »
I thank you for the kind words, same a Merry Christmas for you.
Next a few more images of my last works and also the penultimate attempt to get  system in the playground.
Enjoy time off.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Mikey f

  • Posts: 83
Re: Small pleasures, or what new in the East ...
« Reply #189 on: December 26, 2015, 08:36 AM »
Beautiful work,shop and toys ! Thanks for posting !

Offline Grasshopper

  • Posts: 594
Re: Small pleasures, or what new in the East ...
« Reply #190 on: January 02, 2016, 12:02 AM »

I like this picture. Is the watch a tag heuer carrera chronograph?

let's give a chance floor
- introduction


 [smile] [wink] [smile]
Aspiring DIY'er (hence the name "grasshopper" as I am looking to learn from all the masters on the FOG)- TS 55, OF 1400, MFT/3, VS600 Dovetail Jig, MFS700+ MFS2000 extension profiles, Kapex, Kapex UG set, T12 Li set(x2), CT22, Domino, Carvex, RO90, RO150, MFK700, CMS-VL, Qwas super pack & Cool Wife.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #191 on: January 04, 2016, 02:49 PM »
Yes, you are attentive viewer. And my last work in the past year was inspired by this model.


 [smile] [wink] [smile]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #192 on: January 04, 2016, 03:08 PM »
Beautiful work,shop and toys ! Thanks for posting !

I thank You  for your words.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Grasshopper

  • Posts: 594
Re: Small pleasures, or what new in the East ...
« Reply #193 on: January 04, 2016, 04:30 PM »
Way cool!  I do like my tools German, and my watches Swiss.  Nice work!

Yes, you are attentive viewer. And my last work in the past year was inspired by this model.


 [smile] [wink] [smile]

(Attachment Link)
Aspiring DIY'er (hence the name "grasshopper" as I am looking to learn from all the masters on the FOG)- TS 55, OF 1400, MFT/3, VS600 Dovetail Jig, MFS700+ MFS2000 extension profiles, Kapex, Kapex UG set, T12 Li set(x2), CT22, Domino, Carvex, RO90, RO150, MFK700, CMS-VL, Qwas super pack & Cool Wife.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #194 on: January 28, 2016, 12:37 AM »
Hi everyone, this is a next phase of training. Door from really oak. Building work is suspended. But  founded storage on a small nice pieces of wood. This will be a source of nice little things.
Have a nice day to all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline woodguy7

  • Posts: 2727
Re: Small pleasures, or what new in the East ...
« Reply #195 on: January 29, 2016, 06:05 AM »
Loving your work & workshop.
Did you take part in the spartan race ?  I am going to competing in my first Tough Mudder this summer.  How was it ?
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #196 on: February 01, 2016, 12:48 AM »
Loving your work & workshop.
Did you take part in the spartan race ?  I am going to competing in my first Tough Mudder this summer.  How was it ?

Hi woodguy7,

Thank for your visiting. It is not my victory. One friend of mine is taking part in this competition regularly. The medal is his. Around me there are more such people. This is the reason for the creation of a prototype frame.

Have a nice day.
« Last Edit: February 01, 2016, 12:52 AM by alkaline »
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #197 on: February 19, 2016, 02:47 PM »
Time for installation of wardrobes using Clamex P 55 minutes. I am excited. Oak doors found their place. Bed for cats from scraps of walnut. Nice weekend for all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #198 on: February 19, 2016, 03:32 PM »
Thanks for the update, looks great.
Specially like the picture where the old man watches over your work

Offline ear3

  • Posts: 3406
Re: Small pleasures, or what new in the East ...
« Reply #199 on: February 19, 2016, 03:39 PM »
I apologize if this has been asked and answered before on the thread, but what device do you use to take and/or process your pictures?  They have a great look to them.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #200 on: February 19, 2016, 04:02 PM »
I apologize if this has been asked and answered before on the thread, but what device do you use to take and/or process your pictures?  They have a great look to them.

Everything is OK. Lightroom is the first program for organizing and editing. The second is Photoscape for adding frames and installation to various parties.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #201 on: February 19, 2016, 04:09 PM »
Thanks for the update, looks great.
Specially like the picture where the old man watches over your work


Yes, thank you. The old man was very responsible inspector. His attention did not escape anything.


 [big grin]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Toxiq

  • Posts: 26
Re: Small pleasures, or what new in the East ...
« Reply #202 on: February 29, 2016, 03:36 AM »
Beautiful work again, you are a inspiration for me (and many other I think)
What part of SK are you stationed ?

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #203 on: March 12, 2016, 11:38 AM »
Beautiful work again, you are a inspiration for me (and many other I think)
What part of SK are you stationed ?

Toxiq Hi, Sorry for the delay in response. Now I also noticed your first post. Well, send my greetings to your father in law. Around Bytča and also Poprad they are beautiful forests and local guys are good at woodworking.
I'm in Bratislava. I wish you all good.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #204 on: March 12, 2016, 11:47 AM »
And now something new from work on the my new workbench. It's pine. That design fascinates me. After I fine-tuned production details  make a new piece from beech. Nice weekend for everyone.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #205 on: March 22, 2016, 05:02 PM »
I like to share with you another small pleasure. Work on the table is close to completion. Have a nice day everyone.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #206 on: March 23, 2016, 03:11 PM »
Slightly different parf dogs by Techno Viking...

 [big grin] [wink] [big grin]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #207 on: March 31, 2016, 04:32 PM »
The old and young boy, or in couple it goes better...

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #208 on: April 02, 2016, 08:37 AM »
Chance for a chair. Nice weekend all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #209 on: April 07, 2016, 03:53 AM »
Hello everyone. I started a new game.


 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Toxiq

  • Posts: 26
Re: Small pleasures, or what new in the East ...
« Reply #210 on: April 08, 2016, 12:05 PM »
Nice work again !


Toxiq Hi, Sorry for the delay in response. Now I also noticed your first post. Well, send my greetings to your father in law. Around Bytča and also Poprad they are beautiful forests and local guys are good at woodworking.
I'm in Bratislava. I wish you all good.

 [wink]

Bratislava is nice also, if we plan a trip there I would love to have a look in your shop

Ahoy

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #211 on: April 08, 2016, 08:30 PM »
That wire work in the shelving has my eye.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #212 on: April 10, 2016, 11:52 PM »
Nice work again !


Toxiq Hi, Sorry for the delay in response. Now I also noticed your first post. Well, send my greetings to your father in law. Around Bytča and also Poprad they are beautiful forests and local guys are good at woodworking.
I'm in Bratislava. I wish you all good.

 [wink]

Bratislava is nice also, if we plan a trip there I would love to have a look in your shop

Ahoy

Thanks. OK. It will be a pleasure to see a member of FOG.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #213 on: April 10, 2016, 11:54 PM »
That wire work in the shelving has my eye.

Thank Holmz. For that matter, I chose the quick route. I assume that in the market there are some connectors, which work simplified. I must find them for future projects.

Shots at the end of the first phase.
Nice week for all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #214 on: April 11, 2016, 06:18 AM »
So that shot on the lower right...
Do they use a switch or motion/etc?
Hera/Hafele ?

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #215 on: April 29, 2016, 01:28 PM »
Hi Holmz,
I used motion sensor, probably made in china ... I firmly believe that it will OK. But in the future I look for something reputable.
Some shots of assembling and some of the outcome of this stage ...
Nice weekend for all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #216 on: May 05, 2016, 08:59 AM »
Under the strict supervision of the Inspector General, we made another small step forward ...
I wish you all a nice day.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline TheMarvelousOne

  • Posts: 37
Re: Small pleasures, or what new in the East ...
« Reply #217 on: May 05, 2016, 10:45 AM »
I think it's safe to say that this thread is my all time favorite on the forum! The modern style, love it!

Amazing!

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 10937
  • Let's Redux / Revive / Rewind / Rollback the FOG!
Re: Small pleasures, or what new in the East ...
« Reply #218 on: May 05, 2016, 01:49 PM »
I am lovingggggggg this thread!

More please!

Peter
Disclaimer:  I have been involved with the development of some TSO Products.  I have offered thoughts and ideas freely.  I am not paid but I may receive products during the development process or afterwards.

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #219 on: May 07, 2016, 01:10 PM »
These are strong words. Thanks a lot. Here's something from the past. It's thirteen years back.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #220 on: June 09, 2016, 01:16 PM »
Hi everybody. Little did I blbol with photos protoype boxes for wine, which will I distribute early December.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline jobsworth

  • Posts: 4572
  • Burger Babe Says: I Even Buy Green Bananas
Re: Small pleasures, or what new in the East ...
« Reply #221 on: June 10, 2016, 12:13 PM »
Dood you are awesome, nice work
Loving the Calif sun....

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #222 on: June 10, 2016, 02:45 PM »
Thanks man!
Today I started a small green frenzy. I think, my weekend will be fine. I wish the same to all members of FOG.

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #223 on: June 13, 2016, 12:03 PM »
...finito...

 [wink]

By the way. This shot allows you to see the poorest corner of my shop. It will be a lot more work before I will build workshop of dreams.


  [tongue] [embarassed] [big grin]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #224 on: June 13, 2016, 07:06 PM »
Looks great, and I like the brightness and interplay in the colour scheme. And the green is close to Festool Grean too!

Is it for your own little 'apprentice'?  [smile]
« Last Edit: June 13, 2016, 07:08 PM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #225 on: June 14, 2016, 05:28 AM »
...finito...

 [wink]

By the way. This shot allows you to see the poorest corner of my shop. It will be a lot more work before I will build workshop of dreams.


  [tongue] [embarassed]

Please stop... That shop is already the shop of my dreams, I do not think I could stand seeing a nicer one. It would be too much to take.

Offline Gary Sosa

  • Posts: 7
Re: Small pleasures, or what new in the East ...
« Reply #226 on: June 14, 2016, 11:24 AM »
Ok, I serial read this entire post, all 3 years. Great work, attitude, and skillset. I'm starting out at 62 and enjoying the process, learning as I go. Does the handle Alkaline have something to do with your energy?

Offline Holmz

  • Posts: 4010
Re: Small pleasures, or what new in the East ...
« Reply #227 on: June 14, 2016, 04:33 PM »
Or Basic

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #228 on: June 21, 2016, 03:30 AM »
[big grin] [big grin] [big grin]

Thank you all !!!
So they are already three years? I must definitely speed up! Today a simple matter for a friend.

Have a nice day !

P.S. alkaline, it occurred to me looking at the battery pack from Ikea.

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #229 on: June 28, 2016, 12:18 PM »
...one small wardrobe room. Have a nice day to all. [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #230 on: July 11, 2016, 12:23 PM »
Hello everyone.
It's warm. [tongue]
We started to build a paint shop. And I found that I like apples.

 [wink]

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Kev

  • Posts: 7647
Re: Small pleasures, or what new in the East ...
« Reply #231 on: July 11, 2016, 12:32 PM »
I see you're liking Procreate too [big grin]

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #232 on: July 11, 2016, 12:38 PM »
Yes Kev. Small software but tremendous results.

 [thumbs up]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Kev

  • Posts: 7647
Re: Small pleasures, or what new in the East ...
« Reply #233 on: July 11, 2016, 12:53 PM »
Yes Kev. Small software but tremendous results.

 [thumbs up]

Have a look at Artrage if you haven't already .. you may also find it to your liking.

Re: Small pleasures, or what new in the East ...
« Reply #234 on: July 13, 2016, 11:01 AM »
adding nothing that hasn't already been said, but so happy to have seen this thread.  LOVE the design and execution!!

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #235 on: July 14, 2016, 01:00 PM »
Thanks Kev. I will look at it.   [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #236 on: July 14, 2016, 01:02 PM »
 Many thanks locaholic35. Thank you so much for your words. [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #237 on: July 14, 2016, 01:14 PM »
My small reflection on the future. It seems that my games escalate into something bigger. And now it around me some great people. for keep these positions I need to do much more than just for fun. IMOS would at this stage could be useful step. So I organized a small training team. And I was to look at the road show. Have a nice day for all. [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #238 on: July 26, 2016, 04:04 PM »
More than one month I spent my time just by sitting at computer. I was drawing and counting and drawing and drinking coffee and drawing and counting again. Meanwhile, sad boards made of melamine were being composed downstairs. So I must've done something by myself and something of wood. But not just some wood. Another stand will be useful. Useful for millions of boards, which will need a place to rest in a bit. It starts to be overstuffed in here.

😉
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #239 on: July 26, 2016, 06:13 PM »
I like!   [smile]
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #240 on: September 01, 2016, 01:55 PM »
Today I will not bother my poor English, because I'm tired. [tongue]
So just I wish beautiful day for all.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #241 on: September 04, 2016, 07:47 AM »
From its placing on the market, I kept Conturo nicely at the back of my wish list. I always defeat my desire with balance sheet and therefore my wallet stayed safe. Melanin itself also took a place in making a decision. I'm not gonna lie, I don't like this material but it is a standard in Europe so one can't avoid it.
This summer my work mounded to an amount that a professional workroom would give respect for. So the time has come. Welcome to my new toy. The beginnings were a bit shaky but every new piece made me happier. So I can introduce to you first wardrobe made of tandem FORMAT & CONTURO. It's a successful combination.
The library is 1mm oak veneer and 5mm on the edge. Dry montage is  following with pickling and four coats of italien finish Milesi.
In the rest of the pictures I tried to highlight how is it here bursting at the seams. The idea of big workroom is gone.

Have a nice day all of you guys

 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline NL-mikkla

  • Posts: 216
  • www.m144h.com
Re: Small pleasures, or what new in the East ...
« Reply #242 on: November 14, 2016, 10:26 AM »
@alkaline , I just read all the new "member projects" updates.
We are in need of an update in this thread  [big grin]

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #243 on: November 14, 2016, 04:37 PM »
@alkaline

Looking at your most recent photographs I see that your 'newish' workshop is now fully functional and with quality customer projects at hand.

Best wishes for your continued success.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #244 on: November 18, 2016, 02:50 PM »
Hello friends. Thank you for your kind words. Good word  helps me in these times. There was nowhere to move. But we are fighting.  It's a crazy ride. But beautiful. Nice weekend everyone.

 [smile] [wink] [smile]* K.jpg (1729.67 kB. 1600x1600 - viewed 69 times.)
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline jobsworth

  • Posts: 4572
  • Burger Babe Says: I Even Buy Green Bananas
Re: Small pleasures, or what new in the East ...
« Reply #245 on: November 18, 2016, 03:03 PM »
very nice work.Im the same, I want a contra, but my wallet is holding me back. I will get one when I get back to the states.
Loving the Calif sun....

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #246 on: November 18, 2016, 03:08 PM »
Hi Jobsworth , thanks. I know what you mean but it's worth it to have.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline copcarcollector

  • Posts: 1365
Re: Small pleasures, or what new in the East ...
« Reply #247 on: November 18, 2016, 04:06 PM »
alkaline

You do some amazing work! THANKS for sharing-------  [smile] [smile]

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #248 on: November 24, 2016, 02:38 PM »
Many thanks Copcarcollector,

This game gave me a pretty hard time, but the mission is complete. And I go next.

 [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Elmar50

  • Posts: 55
Re: Small pleasures, or what new in the East ...
« Reply #249 on: November 25, 2016, 12:44 AM »
Alkaline- you do good work; it's good to be busy.

Offline RickyL

  • Posts: 68
Re: Small pleasures, or what new in the East ...
« Reply #250 on: December 09, 2016, 12:54 PM »
Very nice work.
TXS, TSC 55REB, CTL Midi, BHC 18, C18Li, T18+3, PSC 420EB, Kapex KS120 EB, OF1400, EHL 65 EQ, ETS EC150/5, RO150 FEQ

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #251 on: December 10, 2016, 05:50 AM »
Nice weekend everyone.

Hello everyone. A few pictures from my next project. If it succeeds, it will be stairs. I hope.

Nice weekend to all.

 [wink]



I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #252 on: December 24, 2016, 07:58 AM »
I wish all members FOG a happy Christmas, full of love, peace and green toys.

alkaline.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #253 on: December 24, 2016, 08:02 AM »
...and maybe a little good music.

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #254 on: December 24, 2016, 04:48 PM »
And best wishes to you also Alkaline.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline RickyL

  • Posts: 68
Re: Small pleasures, or what new in the East ...
« Reply #255 on: December 24, 2016, 06:11 PM »
Merry Xmas to you also.

Excellent work as always. What laquer was used on the polished high gloss stuff?
TXS, TSC 55REB, CTL Midi, BHC 18, C18Li, T18+3, PSC 420EB, Kapex KS120 EB, OF1400, EHL 65 EQ, ETS EC150/5, RO150 FEQ

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #256 on: December 26, 2016, 03:43 PM »
Thank you boys.
It is a two-component polyurethane varnish Milesi:
http://www.milesi.us/en

There's still a few pictures from some last projects.

I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Picktool

  • Posts: 119
Re: Small pleasures, or what new in the East ...
« Reply #257 on: December 31, 2016, 11:07 AM »
@alkaline

May I be a gargoyle in your shop? Something about
those pictures of your shop just gives me goosies.
So much enthusiasm put into your story. I'm sure
as well as others we all look forward to more of your
adventures in 2017.

Have a Safe & happy New Years!
Well Dogey

Offline RickyL

  • Posts: 68
Re: Small pleasures, or what new in the East ...
« Reply #258 on: January 04, 2017, 06:41 PM »
Under the strict supervision of the Inspector General, we made another small step forward ...
I wish you all a nice day.

  (Attachment Link)

Hello,

Could you tell me how this was acheived? Was that an aluminium or steel extusion in the middle?
TXS, TSC 55REB, CTL Midi, BHC 18, C18Li, T18+3, PSC 420EB, Kapex KS120 EB, OF1400, EHL 65 EQ, ETS EC150/5, RO150 FEQ

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #259 on: January 09, 2017, 08:09 PM »
There's still a few pictures from some last projects.

Great looking projects and photo's.
Happy new year.
Tim

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #260 on: February 01, 2017, 02:24 PM »
Hello Ricky L,
I didn't use any inner reinforcement. Handle/ vertical part is bonded by two pieces of nut-wood. I arranged them after sawing up in a way to make them pull against each other. Since  I was working for myself this risk is acceptable and in the same time a source for next examination of shape of constancy of this solution. From a distance of three quarters of the year the gap between the doors is still 4 mm as in the beginning. I'm satisfied.

Many thanks Tim,
I apologise for being late with my response, the time flies unbelievably. I wish you and also to your close people a successful and happy new year.

The end of last year gave me a really hard time. In the beginning of this one the heating in my workshop decided to stop working hence coming back to my playground was a bit slower. I made this sliding door last week and currently I'm working on other door with hidden hinges. It's a new game for me so I'm moving forward carefully. I made myself preparations for milling the hinges and individual parts will soon end up in skilled hands of techno-viking. He will take care of brilliant white surface.
And I will acquaint you with the result soon. Have a nice day all of you.   [wink]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Coliban

  • Posts: 100
Re: Small pleasures, or what new in the East ...
« Reply #261 on: February 02, 2017, 01:22 AM »
Thanks for sharing, alkaline!

Your work is beautiful, elegant and inspiring, i like your design very much, it shows a very nice aesthetics.

Regards
Green: OF1010, DF500, CTL Midi, RO 125, CXS, SYS-Centrotec 2015/W, MFS 700, MFT/3
Red: Mt55cc, P1cc

Offline mark60

  • Posts: 90
Re: Small pleasures, or what new in the East ...
« Reply #262 on: February 02, 2017, 08:45 PM »
I just wandered into this thread for the first time, you do amazing work, sir.

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #263 on: February 02, 2017, 10:29 PM »
Many thanks Tim,
I apologise for being late with my response, the time flies unbelievably. I wish you and also to your close people a successful and happy new year.

Great looking stuff.
Hope the heat is back on in your shop. Love that shop!
Tim

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #264 on: March 12, 2017, 05:50 PM »
Thanks Tim. Now is all right.
 [wink]

I just ran through the preparation of these tables. Epic fight. Something I also caught on camera.
I wish you all a nice week.

 [smile] [wink] [smile]
« Last Edit: March 12, 2017, 05:54 PM by alkaline »
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #265 on: March 12, 2017, 05:59 PM »
...some BW shots
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline alkaline

  • Posts: 376
Re: Small pleasures, or what new in the East ...
« Reply #266 on: May 01, 2017, 06:31 AM »
Hi everybody.
The first of May is a holiday in our country. So I can share some pictures.
Tables (12 pieces) were completed and found their place. Even the wenge office is finished. The outdoor kitchen will be completed soon.

Nice day for all FOG members.


 [smile] [wink] [smile]
I have several boxes Festool, one MTF, four guide rails and big taste to play. )))

Offline Tim Raleigh

  • Posts: 3483
    • Oakville Cabinetry
Re: Small pleasures, or what new in the East ...
« Reply #267 on: May 01, 2017, 09:32 AM »
Epic fight.

It's always a fight to make it, but worth it. Great stuff!
Take care.
Tim

Online Untidy Shop

  • Posts: 2572
Re: Small pleasures, or what new in the East ...
« Reply #268 on: May 01, 2017, 08:00 PM »
As always @alkaline  your posts are for me a FOG highlight.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn�