« previous next »
Pages: [1]   Go Down

Author Topic: Stairs!  (Read 6100 times)

0 Members and 1 Guest are viewing this topic.

Offline Tech413

  • Posts: 15
Stairs!
« on: December 06, 2016, 10:15 PM »
Hi all! First real post here, other than intro. Thought I would share my project. Building 2 sets of stairs and two landings for our new home! This is my first project with my brand new Domino XL and I am in love! We are building a log home so lots of big timber, posts are 6x6 and stringers and joists on landings are 3x12. I cut almost all the mortises for the basement landing and gluesd up one side of it in roughly an hour! WOW! What a time saver! Anyway, more pics will follow as the job progresses!
« Last Edit: December 06, 2016, 10:31 PM by Tech413 »
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #1 on: December 06, 2016, 10:17 PM »
Lots of Dominoes!
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #2 on: December 06, 2016, 10:20 PM »
Rest of the wood cut!
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline Dane

  • Posts: 296
Re: Stairs!
« Reply #3 on: December 07, 2016, 09:56 AM »
Thanks for sharing- I'm looking forward to more pics of the progress.  Always curious about the different uses folks are getting out of the XL.
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #4 on: December 08, 2016, 09:18 PM »
Progress from yesterday and today! I work full time besides trying to build this house so progression is slow. Basement landing frame is done!
« Last Edit: December 08, 2016, 09:30 PM by Tech413 »
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline Holmz

  • Posts: 3751
Re: Stairs!
« Reply #5 on: December 09, 2016, 06:47 PM »
Well done sir.
I personally would not been able to be creative enough to use the domino as a timber framing tool replacement.
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #6 on: January 02, 2017, 02:38 PM »


A little update on my slow progression for anyone interested! My Domino XL, 2200 router and TS 75 made working these treads and stringers a breeze! Now waiting on some additional clamps to come in and some slow set epoxy, I'm thinking this glue up is going to take a bit of time!


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline Ironmantrev

  • Posts: 56
Re: Stairs!
« Reply #7 on: January 02, 2017, 02:50 PM »
Tech, that looks great! Beautiful looking wood. Looking forward to seeing the finished product. Kind and makes me want to go out and get a Domino XL😀
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #8 on: January 02, 2017, 03:00 PM »
It is probably one of my favourite tools! Super easy to work with and fast!


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline mikeomalley

  • Posts: 43
Re: Stairs!
« Reply #9 on: January 02, 2017, 03:29 PM »
That's impressive! How are you going to manage the assembly?
Mike
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #10 on: January 02, 2017, 03:56 PM »
That's what I'm working on figuring out! The epoxy I'm going to pick up says a working time of 90-110 minutes, I'm gluing all the dominoes into the treads before hand so that'll make things a bunch easier.


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline mikeomalley

  • Posts: 43
Re: Stairs!
« Reply #11 on: January 02, 2017, 04:05 PM »
Thanks, I plan to do something similar but couldn't figure how to do the glue up. You have thought it out well, going to watch your posts closely!  Mike
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #12 on: January 02, 2017, 04:24 PM »
Sounds good! This is a bit of a learn as I go process but I'll answer any questions you have!


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline mikeomalley

  • Posts: 43
Re: Stairs!
« Reply #13 on: January 02, 2017, 05:16 PM »
Totally depending on you! What a wonderful forum this is.[emoji106]
Logged

Offline Poindexter

  • Posts: 143
Re: Stairs!
« Reply #14 on: January 02, 2017, 06:43 PM »
That is a serious way to get to know the Domino.  My first runs were not nearly as ambitious [jawdrop]
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #15 on: January 02, 2017, 06:51 PM »
Quote from: mikeomalley on January 02, 2017, 05:16 PM
Totally depending on you! What a wonderful forum this is.[emoji106]

Haha!! Totally depending... hmmmmm


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline morts10n

  • Posts: 173
Re: Stairs!
« Reply #16 on: January 02, 2017, 09:27 PM »
How are you allowing for wood expansion across the grain of the treads with routed mortices!!?
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #17 on: January 02, 2017, 11:17 PM »
Quote from: morts10n on January 02, 2017, 09:27 PM
How are you allowing for wood expansion across the grain of the treads with routed mortices!!?

There is a small amount of gap in the mortises but because of all the wood in the house, I am already having to strictly control humidity so I don't expect too much expansion.


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline venter

  • Posts: 1
Re: Stairs!
« Reply #18 on: January 06, 2017, 01:27 AM »
Quote from: mortsr10n on January 02, 2017, 09:27 PM
How are you allowing for wood expansion across the grain of the

Excellent, I'll be making some stair soon too.
« Last Edit: June 25, 2017, 07:57 PM by Peter Halle »
Logged

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #19 on: June 19, 2017, 07:09 PM »
Final update! It's done!




Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline Master Carpenter

  • Posts: 34
Re: Stairs!
« Reply #20 on: June 19, 2017, 11:56 PM »
If you have morticed your treads into the stringers, why use dominos?
Logged
Ts 55, of 1010, lr 32, mft, mfs 700, RO 150 x2 + paper asort, RO 90 + paper asort, pro 5, df 500 + dom asort, hl 850 e, ti 15, cxs, centrotec set, ct48, ct sys, 32;55x2;118 tracks, a stack of sys and an og festool first aid kit.

Offline Tech413

  • Posts: 15
Re: Stairs!
« Reply #21 on: June 20, 2017, 06:04 AM »
Quote from: Master Carpenter on June 19, 2017, 11:56 PM
If you have morticed your treads into the stringers, why use dominos?

I like overkill? In all reality, I'm sure it was unnecessary but I do not ever want to have a problem with the stairs. Dominoes added a lot more gluing area and strength.


Sent from my iPhone using Tapatalk
Logged
OF 2200, Kapex 120, Ct26, Domino XL, Ct48, TS 75, MFT/3

Offline glass1

  • Posts: 321
Re: Stairs!
« Reply #22 on: June 25, 2017, 12:04 AM »
Really nice. Anybody have an opinion about weather or not the dominos would be enough without the mortified? Also are the treads open? Anything over 4" fails here.
Logged

Offline Chuck Wilson

  • Posts: 139
Re: Stairs!
« Reply #23 on: July 12, 2017, 10:03 PM »
Those are some beefy stairs!!  Very nice.

Chuck
Logged

Offline RKA

  • Posts: 899
Re: Stairs!
« Reply #24 on: July 13, 2017, 07:38 AM »
Quote from: glass1 on June 25, 2017, 12:04 AM
Really nice. Anybody have an opinion about weather or not the dominos would be enough without the mortified? Also are the treads open? Anything over 4" fails here.

The dominos would hold, but the stair tread would likely split at some point, so it's not a good idea.
Logged
-Raj

Offline Sparktrician

  • Posts: 3316
Re: Stairs!
« Reply #25 on: July 13, 2017, 07:47 AM »
Beautifully done!!!  That DF 700 is one amazing machine.  Your workmanship shines through.   [smile]
Logged
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline six-point socket II

  • Posts: 403
  • aka @the_black_tie_diyer
    • Portfolio
Re: Stairs!
« Reply #26 on: July 13, 2017, 08:37 AM »
Thats one beautiful stairway!

Kind regards,
Oliver
Logged
Pages: [1]   Go Up
« previous next »