Author Topic: Sys roll DIY  (Read 2990 times)

0 Members and 1 Guest are viewing this topic.

Offline fyme

  • Posts: 20
Sys roll DIY
« on: September 21, 2018, 01:59 PM »
Hi, this is my first forum post so welcome everyone.
I made a SYS roll trolley instead of buying the original SYS Roll.
The trolley was made of white plywood















































You can find more photos on Polish forum

I hope you like it :)

« Last Edit: September 21, 2018, 02:07 PM by fyme »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2043
Re: Sys roll DIY
« Reply #1 on: September 21, 2018, 02:05 PM »
nicely done!

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #2 on: September 21, 2018, 02:40 PM »
Thanks  [smile]

Offline amciek

  • Posts: 1
Re: Sys roll DIY
« Reply #3 on: September 21, 2018, 03:39 PM »
Fyme, where can I buy the plans?

Offline mike_aa

  • Posts: 1054
Re: Sys roll DIY
« Reply #4 on: September 21, 2018, 04:00 PM »
@fyme 

 [welcome]  to the FOG!

Very nice build.  Well done!

Which systainer holds the Zubrowka?   [big grin]

Mike A.

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #5 on: September 21, 2018, 04:07 PM »
Thanks :)

Żubrówka is in sys 3  [big grin]

Offline fyme

  • Posts: 20

Offline mrB

  • Posts: 490
Re: Sys roll DIY
« Reply #7 on: September 22, 2018, 05:32 AM »
Woah!  Nice design and execution. The folding base is a real win, and the biggest flaw in the original festool version.

Any info/pictures of those rail>systainer clips? I get the principal, but never actually seen those before. Are they your design?

Thanks for posting.
there's nothing like the right tool for the job

Online ColossusX

  • Posts: 128
Re: Sys roll DIY
« Reply #8 on: September 22, 2018, 09:03 AM »
I've seen those clips on Thingverse.  They can be 3d printed.  Waiting on my friend to fix his printer to print me some of those clips

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #9 on: September 22, 2018, 10:24 AM »
Woah!  Nice design and execution. The folding base is a real win, and the biggest flaw in the original festool version.

Any info/pictures of those rail>systainer clips? I get the principal, but never actually seen those before. Are they your design?

Thanks for posting.

Thanks :)

Yes, this clips is my project and 3d printed :)









Wait, you mean those clips?
https://www.thingiverse.com/thing:2816006
« Last Edit: September 22, 2018, 10:37 AM by fyme »

Offline grobkuschelig

  • Posts: 448
Re: Sys roll DIY
« Reply #10 on: September 22, 2018, 11:05 AM »
Great build!

You seems to like white plywood a lot. :)
It was always quite expensive, when I checked. Did you just buy a lot, or do you have a special connection?

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #11 on: September 22, 2018, 11:18 AM »
Thanks :)

Yes, I like white plywood :)

This plywood is production waste so it was not too expensive :)
« Last Edit: September 22, 2018, 11:49 AM by fyme »

Offline ElectricFeet

  • Posts: 91
Re: Sys roll DIY
« Reply #12 on: September 24, 2018, 03:15 PM »
Neat!

Offline sandy

  • Posts: 58
Re: Sys roll DIY
« Reply #13 on: October 02, 2018, 06:09 PM »
Nice job!

What is "White Plywood"?  At first I thought that you were referring to Melamine, but then I saw that the edges look more like Baltic Birch.  Is it truly a plywood, or is it an engineered product?  I don't think I've ever come across it in the U.S.

I noticed, also, that your photos include a folding MFT style table, similar to the one shown by Coach.carpenter in his My new folding workbench - I'm after some feedback! topic, although, like the one that I showed in my Portable, Folding Workbench With MFT and Router Tops topic, you also provided a simpler method for attaching the top.

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #14 on: October 03, 2018, 02:07 PM »
Thanks :)

White plywood is a formwork plywood. In Poland, found on construction sites.

And yes, I made a table like table Coach.carpenter, but with my modification of the table top fixing.







More photos on the Polish forum
« Last Edit: October 03, 2018, 02:10 PM by fyme »

Online ColossusX

  • Posts: 128
Re: Sys roll DIY
« Reply #15 on: October 03, 2018, 02:15 PM »
Think I'll have to make a version of that

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #16 on: October 03, 2018, 02:19 PM »
I recommend   [big grin]

Offline mrB

  • Posts: 490
Re: Sys roll DIY
« Reply #17 on: October 03, 2018, 05:46 PM »
@fyme Yes I did mean the clips to stand the FS Rails. Thanks for the link.

I wish I could be bothered to make myself a little MFT workbench table that nice. It's super sweet.
there's nothing like the right tool for the job

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #18 on: October 04, 2018, 10:50 AM »
It is very comfortable to work  [smile]


« Last Edit: October 06, 2018, 06:11 PM by fyme »

Offline fyme

  • Posts: 20
Re: Sys roll DIY
« Reply #19 on: October 06, 2018, 06:08 PM »
A few new pictures of the cart :)