Author Topic: SYS VAC Clamping System Cart/Work Station  (Read 2181 times)

0 Members and 1 Guest are viewing this topic.

Offline jericho

  • Posts: 19
SYS VAC Clamping System Cart/Work Station
« on: May 12, 2017, 01:37 PM »
Hey Guys,
 I am not only a Festool junkie, but I am also a dealer employee. I just wanted to show the cart / work station I built to display and demo the VAC SYS clamping system in our store. It is very simple but shows the versatility that is capable in a very small work area. The height to the tops of the clamping modules is the same height as an MFT, which in my opinion is a far superior work height than the MFT plus the module height. It is a very simple design, but keeps everything where you need it, and allows you to move everything with great ease!
« Last Edit: May 12, 2017, 01:39 PM by jericho »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2192
Re: SYS VAC Clamping System Cart/Work Station
« Reply #1 on: May 12, 2017, 02:54 PM »
Really like your use of the KISS principle.  For those unaware...KEEP IT SIMPLE STUPID.   [smile]

Offline thedevme

  • Posts: 105
Re: SYS VAC Clamping System Cart/Work Station
« Reply #2 on: February 12, 2019, 05:33 PM »
This post is old but hopefully, someone can answer.  Is it worth to have both?  I see they sell the set just with one clamp is it worth the extra money to have two?

Online Cheese

  • Posts: 6118
Re: SYS VAC Clamping System Cart/Work Station
« Reply #3 on: February 12, 2019, 06:27 PM »
Well it is if you’re working on an interior/exterior door or countertop.

If you don’t already own a vac module I’d suggest you purchase a single unit use that and when the need arises, purchase the 2nd vac module.

It’s a pretty slick setup.  [smile]

Offline thedevme

  • Posts: 105
Re: SYS VAC Clamping System Cart/Work Station
« Reply #4 on: February 13, 2019, 10:40 AM »
Thanks @Cheese I ended up pulling the trigger on the entire system.  The more videos I watch the more I feel I wont regret my decision. 

Offline jericho

  • Posts: 19
Re: SYS VAC Clamping System Cart/Work Station
« Reply #5 on: February 13, 2019, 08:53 PM »
It is without doubt and without a close second, the most use tool in my shop!!

Online Cheese

  • Posts: 6118
Re: SYS VAC Clamping System Cart/Work Station
« Reply #6 on: February 13, 2019, 09:47 PM »
Thanks @Cheese I ended up pulling the trigger on the entire system.  The more videos I watch the more I feel I wont regret my decision.

You’ll have no regrets...it makes life easier...and that’s what it’s all about.

Offline thedevme

  • Posts: 105
Re: SYS VAC Clamping System Cart/Work Station
« Reply #7 on: February 14, 2019, 10:27 AM »
Thanks @Cheese I ended up pulling the trigger on the entire system.  The more videos I watch the more I feel I wont regret my decision.

You’ll have no regrets...it makes life easier...and that’s what it’s all about.

@Cheese do you mind sharing the dimensions?