Author Topic: Systainer/MFT Cart  (Read 1867 times)

0 Members and 1 Guest are viewing this topic.

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 25
Systainer/MFT Cart
« on: June 01, 2017, 12:11 PM »
Hey y'all... I built a Systainer cart for my MFT table. Check it out:




Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline X

  • Posts: 2
Re: Systainer/MFT Cart
« Reply #1 on: June 01, 2017, 01:03 PM »
Like it.

Offline Atonwa

  • Posts: 43
Re: Systainer/MFT Cart
« Reply #2 on: June 01, 2017, 05:09 PM »
Good video and I really like the cart. I'm thinking of making something similar but just a little longer than the table so I can set down a tool off of the deck and also store my Festool rails on it.

Offline six-point socket II

  • Posts: 387
  • aka @the_black_tie_diyer
    • Portfolio
Re: Systainer/MFT Cart
« Reply #3 on: June 01, 2017, 06:37 PM »
Hi,

Excellent video Ryan and your Systainer/MFT cart really is a beautiful piece of shop furniture - great build!

Thanks for sharing it with us!

Kind regards,
Oliver

Offline neilc

  • Posts: 2095
Re: Systainer/MFT Cart
« Reply #4 on: June 02, 2017, 01:14 AM »
Nice design.  I like the end drawers.  What are you keeping in them given the depth?

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 25
Re: Systainer/MFT Cart
« Reply #5 on: June 02, 2017, 11:03 AM »
So far, parallel guides and clamps, dogs, rules, etc...

Offline Blakestiles

  • Posts: 2
Re: Systainer/MFT Cart
« Reply #6 on: June 03, 2017, 03:05 PM »
Can you still clamp marterial on the side of the cart or does the cart get in your way?

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 25
Re: Systainer/MFT Cart
« Reply #7 on: June 03, 2017, 03:30 PM »
Can you still clamp marterial on the side of the cart or does the cart get in your way?

All four sides are still 100% useable...

Offline gunnyr

  • Posts: 57
Re: Systainer/MFT Cart
« Reply #8 on: June 04, 2017, 07:09 PM »
Well done!  Your 'no measure' method of drawer installation makes for little room for mistakes. 

Thanks for sharing.
Semper Fi,
Jeff

PRO 5 LTD|TS 55 REQ|CXS|RO 90|CT 26|OF 1400|LR 32|DF 500|MFT/3|ETS 150/3|MFS 400|MFK 700|HKC 55|PSB 420
US Marines - UK Wildcats - Cincinnati Reds