Waka
 Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
 |
« on: August 17, 2010, 02:55 PM » |
|
I thought I'd post some photographs of a tool cabinet I made last year. I got the design from Jim Tolpin's Toolbox Book and it's loosely based on the tool cabinet by Andy Rae, although I have to say nowhere near as good, but this was my first attempt. All the drawers in the lower part are push to close / open runners with the top ones ordinary drawer runners.      Hope you enjoy. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #1 on: August 17, 2010, 03:53 PM » |
|
Way to nice for a workshop! Great work!
Looks like cork in the drawers? Nice touch!
|
|
|
|
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2116
|
|
« Reply #2 on: August 17, 2010, 03:54 PM » |
|
Fantastic piece! It must give you a lot of pleasure every time you take a tool out.
Is that birds eye maple on the drawer fronts? May I ask if you used power tools or hand tools to smooth it? I am having difficulty smoothing some for a project I am working on.
Richard.
|
|
|
|
|
Logged
|
I like green.
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #3 on: August 17, 2010, 04:12 PM » |
|
Fantastic piece! It must give you a lot of pleasure every time you take a tool out.
Is that birds eye maple on the drawer fronts? May I ask if you used power tools or hand tools to smooth it? I am having difficulty smoothing some for a project I am working on.
Richard.
Richard The woods used were Indonesian Rosewood with panels of Birdseye Maple for the main frames, the drawer fronts are made from solid Birdseye Maple with the drawer carcases are made from Mapel. All the wood had the final finish using hand tools, the planes I used are Sauer & Stainer, not really a problem with tear out but then they are exceptional planes. Not sure what angle you're using on your planes, you could try a back bevel on the blade to give a higher angle. I guess failing that resort to a hand sanding with Abranet. Hope this helps. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
Peter Halle
Global Moderator
 Online
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6387
|
|
« Reply #4 on: August 17, 2010, 04:25 PM » |
|
What a gorgeous piece! I almost typed around the filter when I saw this. I just looked at the cover of the book and did see some similarities, but yours is more beautiful in my opinion.
Sure am glad you asked about how to post pictures!
Peter
|
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
mc
Offline
Location: Denver, Colorado Member Since: Jul 2010
Posts: 5
|
|
« Reply #5 on: August 17, 2010, 04:50 PM » |
|
That tool chest is amazing. Not to mention the collection of tools inside!
One slight gripe. Seeing your tool cabinet reminded me that I have been meaning to build something similar. Your reference to Jim Tolpins book reminded me that I have wanted that book for awhile. While I was purchasing the book for the lie-nielsen site I remembered that I could probably use a couple more items. Long story, short. Your post cost me $175.
|
|
|
|
|
Logged
|
|
|
|
jmbfestool
Online
Location: UK Member Since: Jan 2009
Posts: 5202
|
|
« Reply #6 on: August 17, 2010, 04:53 PM » |
|
Very nice! Nice collection of tools very expensive! I hope one day!
JMB
|
|
|
|
|
Logged
|
|
|
|
neilc
Offline
Location: chicagoland Member Since: Jan 2007
Posts: 694
|
|
« Reply #7 on: August 17, 2010, 05:23 PM » |
|
Excellent cabinet. And what a tool collection to go in it! Thanks for sharing.
Neil
|
|
|
|
|
Logged
|
|
|
|
woodguy7
Offline
Location: wick, scotland Member Since: Apr 2009
Posts: 2400
|
|
« Reply #8 on: August 17, 2010, 05:35 PM » |
|
Beautiful piece of furniture there. How much did the wood cost for a cabinet like that ? I see that cabinet on your avatar on UK Workshops & always wanted to see inside it. Even better than i thought it would be. I presume the drawers are hand cut dovetails  Any pics of them & possibly more of the Sauer & Stainer plane ? I have a bit of a soft spot for planes  Thanks for sharing, Woodguy. |
|
|
|
|
Logged
|
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too
|
|
|
Jonathan
Offline
Location: Glasgow - Scotland Member Since: Aug 2008
Posts: 62
|
|
« Reply #9 on: August 17, 2010, 05:49 PM » |
|
Thats's a beautiful tool cabinet and I really like the layout and details. Thanks for sharing the photos.
|
|
|
|
|
Logged
|
KAPEX120|TS55|DF500DOMINO|OF1400|MFK700|PS300 X 2|TDK12 SET|EHL65|ROTEX150|ETS150/3|RTS400|CTL22 X 2|CTLMINI|CTBOOM ARM|MFT/3 X 2|WALKO 4 MFB X 2
|
|
|
Der Flickschuster
Offline
Location: Denali Highway, Alaska Member Since: Aug 2010
Posts: 70
just another day in Paradise...
|
|
« Reply #10 on: August 17, 2010, 08:09 PM » |
|
That looks to be exceptional work and speaking for myself, an inspiration. A few questions: What did you use for finish? Have you cutouts for each plane's chisel or, as asked above, are the drawers and cubbyholes cork-lined? Are you happy with the drawer pulls or would you suggest an alternative for someone trying to make something similar? |
|
|
|
|
Logged
|
In the Heart of the Alaska Range - easternmost end of the Denali Highway. www.denalihwy.com |
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2116
|
|
« Reply #11 on: August 17, 2010, 08:57 PM » |
|
Fantastic piece! It must give you a lot of pleasure every time you take a tool out.
Is that birds eye maple on the drawer fronts? May I ask if you used power tools or hand tools to smooth it? I am having difficulty smoothing some for a project I am working on.
Richard.
Richard The woods used were Indonesian Rosewood with panels of Birdseye Maple for the main frames, the drawer fronts are made from solid Birdseye Maple with the drawer carcases are made from Mapel. All the wood had the final finish using hand tools, the planes I used are Sauer & Stainer, not really a problem with tear out but then they are exceptional planes. Not sure what angle you're using on your planes, you could try a back bevel on the blade to give a higher angle. I guess failing that resort to a hand sanding with Abranet. Hope this helps. Uh-oh, I was afraid you would mention a back bevel. I do not want to put one on my current #4 plane blade, so I may have to order an extra blade and set it up with a back bevel. I'll be doing a lot with figured woods in the future. Thanks for the quick reply Richard. |
|
|
|
|
Logged
|
I like green.
|
|
|
JD2720
Offline
Location: USA Member Since: Sep 2007
Posts: 598
|
|
« Reply #12 on: August 17, 2010, 10:35 PM » |
|
Beautiful cabinet.
|
|
|
|
|
Logged
|
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #13 on: August 18, 2010, 01:08 AM » |
|
Beautiful piece of furniture there. How much did the wood cost for a cabinet like that ? I see that cabinet on your avatar on UK Workshops & always wanted to see inside it. Even better than i thought it would be. I presume the drawers are hand cut dovetails Any pics of them & possibly more of the Sauer & Stainer plane ? I have a bit of a soft spot for planes Thanks for sharing, Woodguy. Woodguy All the drawers back and front are handmade dovetails, I get a real sense of satisfaction with hand cut DT's. I'll post a picture of the planes later. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #14 on: August 18, 2010, 01:22 AM » |
|
That looks to be exceptional work and speaking for myself, an inspiration. A few questions: What did you use for finish? Have you cutouts for each plane's chisel or, as asked above, are the drawers and cubbyholes cork-lined? Are you happy with the drawer pulls or would you suggest an alternative for someone trying to make something similar? MC Sorry about the expense my post has cost you, but now you can work through the book, I think its one of the best on the market for tool chests/boxes/cabinets etc. Alaska Ranger I used some off cuts of Indonesian Rosewood and just filed profiles to fit the planes and chisels etc. You are correct I did line the drawers with a layer of cork, I wanted to protect the tools and the wood and I have to say I think it sets them off. The drawer pulls took a lot of thinking about, I really had two choices, do them as they are or have them flush with the drawer front. There was one other alternative and that was to use the push to open/close drawer runners in the top as well as the bottom parts of the cabinet, and in hindsight I wish I had gone this way. But I don't think the drawer pulls look to bad and somehow, I think it sets off the inside. I guess if you were starting off on a project like this I'd recommend looking at as many cabinets as you can and choosing what takes your eye. Thanks all for the nice comments, to me this project was a labour of love and something I wanted to do to enhance my skills. It's been mentioned before that it's too nice for the workshop and you could be right, but I get a lot of pleasure using it. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
waynelang2001
Offline
Location: south africa Member Since: Feb 2010
Posts: 486
|
|
« Reply #15 on: August 18, 2010, 01:56 AM » |
|
That really is a beautiful piece of " furniture ". I would be to worried to even make any dust around it. And your collection of hands tools are just as beautiful.
|
|
|
|
|
Logged
|
|
|
|
Der Flickschuster
Offline
Location: Denali Highway, Alaska Member Since: Aug 2010
Posts: 70
just another day in Paradise...
|
|
« Reply #16 on: August 18, 2010, 02:15 AM » |
|
What did you use for finish?
Whoops. Let's try again. Translating the above from Alaskanese: What finish did you use on the (various) wood(s)? Stain/varnish/shellac/Kilz primer   /polyurethane..... |
|
|
|
|
Logged
|
In the Heart of the Alaska Range - easternmost end of the Denali Highway. www.denalihwy.com |
|
|
Troy B
Offline
Location: Central Florida Member Since: Sep 2009
Posts: 21
JWB Services, Inc.
|
|
« Reply #17 on: August 18, 2010, 02:55 AM » |
|
 Beautiful Cabinet! Like it was said above its too nice for the shop but then again if your making a "Tool Cabinet"more like a piece of furnature the rest of the shop will soon follow. Great Work!  You should be proud .
|
|
|
|
|
Logged
|
Just a small fish in a big pond trying to make a difference one job at a time.
TS-55 , TS-75 , RO 150 FEQ , ETS 150 FEQ , RTS 400 EQ , CT 33 , Various Guide Rails , Guide Rail Accessories
|
|
|
tigger
Offline
Location: Cape Town, South Africa Member Since: Apr 2010
Posts: 114
|
|
« Reply #18 on: August 18, 2010, 07:30 AM » |
|
All I can say in addition to all of the above is..... "Thats one nice piece of woodwork you have there!" Thanks for posting it |
|
|
|
|
Logged
|
If it 'aint Festool, it 'aint a tool at all !
|
|
|
honeydokreg
Offline
Location: Woodstock GA Member Since: Feb 2007
Posts: 1498
|
|
« Reply #19 on: August 18, 2010, 08:48 AM » |
|
wake that looks awesome what a beautiful job......
thanks for sharing
|
|
|
|
|
Logged
|
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #20 on: August 18, 2010, 11:25 AM » |
|
What did you use for finish?
Whoops. Let's try again. Translating the above from Alaskanese: What finish did you use on the (various) wood(s)? Stain/varnish/shellac/Kilz primer /polyurethane..... Alaska Ranger Sorry I missed the question in the first post regarding the finish. I used blonde shellac on the Rosewood and Birdseye Mapel, many many coats, the inside of the drawers is finished with Finishing Oil. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
Neill
Offline
Location: USA Member Since: Jun 2008
Posts: 888
|
|
« Reply #21 on: August 18, 2010, 11:45 AM » |
|
WaKa,
Gorgeous work. If this is what you do for your shop, I cannot imagine what you do for your clients. Probably wind up in a museum somewhere.
Neill
|
|
|
|
|
Logged
|
Kapex, Domino, MFT/3, Rotex 150 FEQ, CT 22E, TS 55, C12 Drill, 1400 Router, Rotex 90 DX, Rotex 125 FEQ, LS 130 EQ Linear, Parallel Guide Set, Deltex 93 E, Trion 300 Barrell Grip, ETS 150/3 EQ, ES125 EQ, Guide Rail Accessory Kit, Sanding Block, various rails, systainers, sortainers, vacuum hoses and accessories for various tools.
|
|
|
Jim Kirkpatrick
Offline
Location: Central Massachusetts Member Since: Feb 2008
Posts: 637
|
|
« Reply #22 on: August 18, 2010, 01:11 PM » |
|
I'm totally inspired by your tool cabinet. Great design and execution! Thanks for sharing.
|
|
|
|
|
Logged
|
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #23 on: August 18, 2010, 05:06 PM » |
|
WaKa,
Gorgeous work. If this is what you do for your shop, I cannot imagine what you do for your clients. Probably wind up in a museum somewhere.
Neill
Neill I don't have any clients, working with wood is my hobby so I only make things for myself and family. Never seem to run out of projects. |
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
Notorious T.O.D.
Offline
Location: Harrisburg, NC Member Since: Nov 2008
Posts: 506
|
|
« Reply #24 on: August 18, 2010, 05:27 PM » |
|
That is one KILLER toolchest! You should be very proud !
Best,
Todd
|
|
|
|
|
Logged
|
|
|
|
GPowers
Offline
Location: West Coast, USA Member Since: Mar 2010
Posts: 1665
Metric convert
|
|
« Reply #25 on: August 18, 2010, 05:52 PM » |
|
The tool cabinet is nicer that most of the furniture in my house.  |
|
|
|
|
Logged
|
Greg Powers
Size:XL
|
|
|
woodguy7
Offline
Location: wick, scotland Member Since: Apr 2009
Posts: 2400
|
|
« Reply #26 on: August 18, 2010, 05:55 PM » |
|
& tools like that for a hobby, I'm impressed |
|
|
|
|
Logged
|
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too
|
|
|
RICHDEMPSEY
Offline
Location: Inistioge Co Kilkenny Ireland Member Since: Aug 2010
Posts: 9
|
|
« Reply #27 on: August 19, 2010, 05:05 AM » |
|
Beautiful, do you have any construction photos? And when will mine be ready for collection lol,  |
|
|
|
|
Logged
|
|
|
|
Jim Kirkpatrick
Offline
Location: Central Massachusetts Member Since: Feb 2008
Posts: 637
|
|
« Reply #28 on: August 19, 2010, 10:15 AM » |
|
I'd like to see what's in those bottom 2 drawers! And some more head on pictures for sure! Keep em coming.
|
|
|
|
|
Logged
|
|
|
|
Waka
Offline
Location: Weymouth Dorset England Member Since: Jul 2010
Posts: 125
|
|
« Reply #29 on: August 19, 2010, 03:12 PM » |
|
|
|
|
|
|
Logged
|
Waka
Kapex 120, TS55, Domino 500, MFS 400, Centrotec Set, CDD 12 FX, BPS 15.6, BPS 12, Domino Sys, Trion PS 300OG Router OF 1400, EST 150/5, RTS 400 Q-Plus, Parrallel Guides, CT Mini x 2, LR 32, and lots of little extras. Slowly building up on "T" Locks.
|
|
|
woodguy7
Offline
Location: wick, scotland Member Since: Apr 2009
Posts: 2400
|
|
« Reply #30 on: August 19, 2010, 05:15 PM » |
|
Holy crap, when did you win the lottery How much did those planes cost. They are lovely. As for construction photos on a disc, no, no no. Everyone here will want to see those pics so keep em coming Woodguy. |
|
|
|
|
Logged
|
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Festool Fishy
Offline
Location: England Member Since: May 2009
Posts: 73
|
|
« Reply #31 on: August 19, 2010, 05:48 PM » |
|
Waka as all have said great cabinet
Not sure how it works but I sent you a message hope it gets to you
Cheers keep up the great work
|
|
|
|
|
Logged
|
|
|
|
waynelang2001
Offline
Location: south africa Member Since: Feb 2010
Posts: 486
|
|
« Reply #32 on: March 27, 2011, 04:04 AM » |
|
Just had to have another look at this cabinet, I would really love to make something similar. Anyone else have pictures of really nice tool cabinets  |
|
|
|
|
Logged
|
|
|
|
Mauri Motti
Offline
Location: Finland Member Since: Feb 2011
Posts: 201
|
|
« Reply #33 on: March 27, 2011, 05:20 AM » |
|
the book, I think its one of the best on the market for tool chests/boxes/cabinets etc. [/quote]
Thanks Waka,
I've found and ordered the book from ebay UK and am looking forward.
Kind regards, Mauri
|
|
|
|
|
Logged
|
|
|
|
Eli
Offline
Location: Melbourne, Australia Member Since: Jul 2007
Posts: 2480
A Yankee in Kangaroo Court
|
|
« Reply #34 on: March 27, 2011, 07:57 AM » |
|
Very nice work. Thanks for sharing.
|
|
|
|
|
Logged
|
Do nothing, stay ahead.
|
|
|
RonWen
Retailer
Online
Location: One of the Thirteen Original Colonies of the United States of America. Member Since: Feb 2009
Posts: 1519
|
|
« Reply #35 on: March 27, 2011, 09:30 AM » |
|
I thought I'd post some photographs of a tool cabinet I made last year.
I got the design from Jim Tolpin's Toolbox Book and it's loosely based on the tool cabinet by Andy Rae, although I have to say nowhere near as good, but this was my first attempt.
All the drawers in the lower part are push to close / open runners with the top ones ordinary drawer runners.
Hope you enjoy.
That is a VERY nice tool cabinet, I'm actually more in awe of the beautiful collection of tools that filled it! |
|
|
|
|
Logged
|
|
|
|
Sal LiVecchi
Offline
Location: Sayville, NY USA Member Since: Sep 2010
Posts: 868
|
|
« Reply #36 on: March 27, 2011, 10:54 AM » |
|
Besides being well plan'd and laid out so well , this piece is really awesome...What a choice of wood to use
For me this is a tools greatest resting place it could ever deserve and you do have a great collection of planes...
I don't think I have ever seen someone with this amount, this is sure proof that you are an artist of old school methods
|
|
|
|
|
Logged
|
Life is too short and the road is too long to drive anything less than a Festool
|
|
|
|
