Author Topic: Work bench  (Read 2722 times)

0 Members and 1 Guest are viewing this topic.

Offline zoki4691

  • Posts: 47
Work bench
« on: February 09, 2018, 10:49 AM »
The time has come to make a bench, a workbench. After my B & D Workmate 2000 and MFTC, I want to do a carpenter's bench. Beautiful robust (at least 2 quintals) and exploit all the recovery material
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline blaszcsj

  • Posts: 326
  • I like building stuff with my hands.
Re: Work bench
« Reply #1 on: February 09, 2018, 01:10 PM »
In for an interesting build! Looks like fun!
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TS55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #2 on: February 09, 2018, 01:57 PM »
Thanks, but there is still so much to see
275288-0275290-1275292-2275294-3275296-4275298-5275300-6275302-7275322-8275322-9275324-10275326-11
« Last Edit: February 09, 2018, 04:34 PM by zoki4691 »
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #3 on: February 09, 2018, 04:30 PM »
other foto
275304-0

275306-1275308-2275310-3275312-4275314-5275316-6275318-7275320-8
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #4 on: February 10, 2018, 05:07 AM »
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline Untidy Shop

  • Posts: 2629
Re: Work bench
« Reply #5 on: February 10, 2018, 05:25 AM »
@zoki4691
I  like following work bench threads; I am sure others do too. Am looking fwd to your progressive posts.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #6 on: February 10, 2018, 05:57 AM »
@zoki4691
I  like following work bench threads; I am sure others do too. Am looking fwd to your progressive posts.


Thanks, I have trouble uploading photos. I hope my tread was useful
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline Michael Kellough

  • Posts: 3288
Re: Work bench
« Reply #7 on: February 10, 2018, 10:49 AM »
I like seeing bench builds too.

For others who wondered, the impressive looking clamps are made by Piher in Spain.

Also, 2 quintals is short for 2 hundred units.
« Last Edit: February 10, 2018, 01:29 PM by Michael Kellough »

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #8 on: February 10, 2018, 12:28 PM »
the weight is 240 kg
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline TSO Products

  • Retailer
  • *
  • Posts: 604
    • TSO Products
Re: Work bench
« Reply #9 on: February 11, 2018, 02:08 PM »
@zoki4691 - very creative departure from the conventional approaches - thank you for sharing ere on the FOG!

Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE Guide Rail Squares -  the MTR-18 Triangle and Work Holding solutions

Offline Mismarked

  • Posts: 137
Re: Work bench
« Reply #10 on: February 11, 2018, 06:28 PM »
Very nice bench (and video).

Offline RussellS

  • Posts: 194
Re: Work bench
« Reply #11 on: February 11, 2018, 09:53 PM »
I like the joint for the legs.  Dovetail plus straight tenon.  But I am wondering WHY?  You could just do a straight tenon.  Simpler, easier, and likely stronger too.  The workbench top has gravity pulling down onto the legs.  The legs cannot pull out.  The weight of the bench keeps it down on top of the legs.  And with a fully enclosed tenon on the leg end, it cannot go sideways either.  So other than the decorative effect, why?  Its weaker and not as good as a captured tenon on the end of a leg.  The side of the bench top should also be one long smooth board.  Your side is broken up by the dovetails.  Its not flat, straight, smooth.

Offline NL-mikkla

  • Posts: 239
  • www.m144h.com
Re: Work bench
« Reply #12 on: February 12, 2018, 05:10 PM »
Supercool project, like your swordsaw to!

Offline KongKirill

  • Posts: 45
Re: Work bench
« Reply #13 on: February 17, 2018, 08:10 PM »
Very impressive! You sure gave this bench a lot of love and care!!

Offline zoki4691

  • Posts: 47
Re: Work bench
« Reply #14 on: March 12, 2018, 07:58 AM »
Very impressive! You sure gave this bench a lot of love and care!!
THX   :-*
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200