Author Topic: Felder K540s  (Read 6426 times)

0 Members and 1 Guest are viewing this topic.

Offline Brandavino

  • Posts: 1
Felder K540s
« on: December 06, 2017, 06:23 AM »
Hi there experts,
Looking at Felder K540s, 2800 slider, the big blade looks useful, as I do solid wood and ply but after having a MM SC2 forever I may be simply in love with the idea of the K540s, is my heart taking over. ?
Keen on the best accuracy and reliability I can afford, the Xroll table gets good raps.
Any thoughts ? I have maxed out the budgets so can not go to 700 series.
What would be Minimax equivalent ?
My first post, I do have lots of Festool stuff well worn in, but so in need of a decent slider.
Grateful advice.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Timtool

  • Retailer
  • *
  • Posts: 1014
    • My website
Re: Felder K540s
« Reply #1 on: December 06, 2017, 08:48 AM »
I think the 500 and 700 range(which I own) share the same crucial mechanical elements, thought the overall build is lighter on the 500.
The main advantage of the 700 is the ability to have electronic settings.

You can't really go wrong with MM, but you'll likely lose the dado ability, which in my eyes is a major feature to lose once you're used to it.
BR10, MFK 700, OS 400, ETS EC 150/3, KA 65-plus,TS55R, CT22E, CTLmini, CTL MIDI, CTM 36 AC HD, Kapex KS120, ETS125, ETS150/5, RO150, RO90, CXS-set, T-15+3 set, DTS400, OF900, OF1010, OF2200 set, Carvex PS420 EBQ set, EHL 65, SSU 200, Centrotec installer set, LR32-sys, FS-800, FS-LR-1400x2, domino 500+domino sys, domino 700 XL, Surfix-sys, Sys-box 1, Syslite, LEV-350, Sys-box,MFTB/1-2-4... MFTC, MFSC

Offline HowardH

  • Posts: 1130
Re: Felder K540s
« Reply #2 on: February 05, 2018, 11:09 PM »
the 500 series is basically a Hammer with the upgraded x-roll slider.  The "real" Felder series starts with the 700.
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, CT36E, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, CMS GE

Offline kcufstoidi

  • Posts: 768
Re: Felder K540s
« Reply #3 on: February 06, 2018, 07:24 AM »
The K540 is an oddity, it has basically a Hammer chassis which is counterbalanced with a large piece of concrete along with a modified double trunnion of the 700 series with a xRoll slider. I had a K500S as my first slider and it was OK. I've had a K700S Pro since 2010 and it has been great.Personally if finances are a problem either lease to own or look for a good used 700 series. If you have a constant need to cut material that is over 4" thick would be my only reason for getting the K540.

Offline online421

  • Posts: 95
Re: Felder K540s
« Reply #4 on: March 15, 2018, 06:24 PM »
Have you considered used Altendorf/Martin?

Personally if I am in the market for a saw I seriously would spend a little more and get an ex display or slightly used Altendorf/Martin

Griggio Unica400
Felder AD951
Masterwood OMB1V
SCM 5 RCS1100
Casadei FV110
Chicago Pneumatics CPRS10500
Ceccato CDX 12
Holytek DC006
Festool DF700XL, CT36, LEX3
JLT 190BM2, JLT 79K10
Danfoss VLT 2880
Sicar TOP6