Author Topic: Help me figure out which Woodpecker rule to get  (Read 1315 times)

0 Members and 1 Guest are viewing this topic.

Offline DynaGlide

  • Posts: 67
Help me figure out which Woodpecker rule to get
« on: November 20, 2017, 08:44 AM »
I'll be getting the Seneca Parallel guides soon as a gift. I've seen in various posts that you can use the Woodpecker Rule Stop to get dead nuts on adjustments for the parallel guides by butting the Rule Stop up against the strip of your rail. That got me looking into the Woodpecker rules.

First. .why would I want a Hook Stop when the Rule Stop seems to do the same thing?

Second: As I'm new to all this it seems my best option is to use metric for ripping sheet goods for cabinetry focused projects. Woodpecker makes a dual Inch/Metric rule but it's 48" long. I'd love if they made it in shorter lengths. For the sole purpose of ripping sheet goods for future cabinetry focused projects, should I be looking at one of their metric rules? I don't own an LR 32 yet but see one in my future for a couple built in projects so I see the merits of having metric for layout lines and for ripping setups.

TL;DR: Which woodpecker rule is your most used?

Thanks all

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8072
  • Finger Lakes Region, NY State , USA
Re: Help me figure out which Woodpecker rule to get
« Reply #1 on: November 20, 2017, 09:52 AM »
    I have all four lengths in inch with the center scale on one edge. I use them all, 6" the  least.  Obviously the 4' ish will cover the range but it can be a nuisance when measuring something short. Which may not matter if your primary use is to set the guides. If you want to cover the  range with just two , then get 4' and 2'.

    The hook stop allows use of the full length to measure from the end. If the rule stop is positioned at the end you will be missing the first couple inches of measurement.  Trade off is you can set a length as opposed to measuring from the end. I have a hook stop rarely use it because it gets in the way sometimes when placing the rule flat on a piece longer than the rule. @rmh I would use the hook stop a lot if it were quick detach.

   You will also need to decide between both edges having the same scale, one edge center scale ( I use this fairly often), and dual scale (the one your considering). You may want to think about the scale orientation related to the use fro setting the guides.

Seth
« Last Edit: November 20, 2017, 09:57 AM by SRSemenza »

Offline Chris Perren

  • Posts: 71
Re: Help me figure out which Woodpecker rule to get
« Reply #2 on: November 20, 2017, 11:50 AM »
Either the hook stop OR rule stop will allow you to calibrate the INCRA rule on the Seneca Parallel guides... Afterwards you can use the sliding INCRA rule ... Although typically I just use the rule stop to set my desire measurement and not bother with the INCRA ruler...
« Last Edit: November 20, 2017, 11:58 AM by Chris Perren »

Offline DynaGlide

  • Posts: 67
Re: Help me figure out which Woodpecker rule to get
« Reply #3 on: November 20, 2017, 12:25 PM »
@SRSemenza Thank you. So I'm leaning toward a 600mm and 900mm with center rule for cabinetry focused tasks. I don't foresee needing 48" but if I do I'll pick up the dual scale inch/metric.

Offline Cheese

  • Posts: 3729
Re: Help me figure out which Woodpecker rule to get
« Reply #4 on: November 20, 2017, 12:37 PM »
The first 4' rule I purchased was with a hook stop. The 2nd 4' rule I purchased was with a rule stop. Eventually I removed the hook stop because it was always in the way. I don't even know where it is any more. I use the rule stop all the time.

Be careful not to leave the ruler exposed for long periods in sunlight. The red anodizing fades to a light pink and in bright light, there's very little contrast between the faded red and the white markings, making them virtually impossible to see. That's the reason I own 2 of them. The new one for use outside while the old one can only be read in side the shop under soft illumination.

Check out the photo...some of the markings on the original rule are still difficult to read even under shop conditions.
« Last Edit: November 20, 2017, 12:39 PM by Cheese »

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8072
  • Finger Lakes Region, NY State , USA
Re: Help me figure out which Woodpecker rule to get
« Reply #5 on: November 20, 2017, 01:32 PM »
The first 4' rule I purchased was with a hook stop. The 2nd 4' rule I purchased was with a rule stop. Eventually I removed the hook stop because it was always in the way. I don't even know where it is any more. I use the rule stop all the time.

Be careful not to leave the ruler exposed for long periods in sunlight. The red anodizing fades to a light pink and in bright light, there's very little contrast between the faded red and the white markings, making them virtually impossible to see. That's the reason I own 2 of them. The new one for use outside while the old one can only be read in side the shop under soft illumination.

Check out the photo...some of the markings on the original rule are still difficult to read even under shop conditions.

I have had the fading occur but only on some of the larger items. EX-  My 18" square has faded a lot but 26" is fine. I am hoping this is an issue that WP fixed.

Seth

Offline Cheese

  • Posts: 3729
Re: Help me figure out which Woodpecker rule to get
« Reply #6 on: November 20, 2017, 02:06 PM »
I have had the fading occur but only on some of the larger items. EX-  My 18" square has faded a lot but 26" is fine. I am hoping this is an issue that WP fixed.

I read somewhere that red is the color that they have the largest problem with. There are different red dyes that have differing amounts of colorfastness, however Woodpecker's may not even know they have a problem and thus never bothered to try a different dye manufacturer or anodizer.  [eek]
I've certainly never alerted them to the issue. Anodization is one of the only manufacturing steps they out source.
 

Offline McNally Family

  • Posts: 479
  • Festool Atomic Phaser Particle Blaster (APPB Set)
Re: Help me figure out which Woodpecker rule to get
« Reply #7 on: November 20, 2017, 02:34 PM »
Would the fading issue not be part of the lifetime guarantee?  Particularly if it inhibits the ability to read the scales?
« Last Edit: November 21, 2017, 06:58 AM by McNally Family »
GREEN: In order of purchase = | CT26 w/Installer Cleaning Set | C18 5.2 Set w/Centrotec Installer's Set | RS 2 E | Hose w/ Sleeve 3.5m | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set |  Won the CXS Li 2.6 90 Limited Edition on 06/20/2016 | Metric Parallel Guide Set | 1080 Plate for custom MFT | OF 1400 EQ Router (metric) w/accessories | FS1400/2-LR 32 Guide Rail (x1) | Cordless Sander RTSC 400 Set  | Next  Purchase: TBD

RED: // Mafell P1cc  //  MT55cc  // Next purchase: TBD

Offline Cheese

  • Posts: 3729
Re: Help me figure out which Woodpecker rule to get
« Reply #8 on: November 20, 2017, 04:07 PM »
Would the fading issue not part of the lifetime guarantee?  Particularly if it inhibits the ability to read the scales?

Great question... [doh] ...I’ll contact Woodpeckers tomorrow.  Thanks 🙏 for the idea.

Online egmiii

  • Posts: 62
Re: Help me figure out which Woodpecker rule to get
« Reply #9 on: November 20, 2017, 04:13 PM »
Please report back. I'd be interested to hear what they have to say. There is a very low probability of my tools being exposed to the sun, but after investing thousands into their brand, I'd like to hear how this is handled.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8072
  • Finger Lakes Region, NY State , USA
Re: Help me figure out which Woodpecker rule to get
« Reply #10 on: November 20, 2017, 04:51 PM »
I know, that they do know about the fading problem.

Seth

Offline Michael Kellough

  • Posts: 3032
Re: Help me figure out which Woodpecker rule to get
« Reply #11 on: November 20, 2017, 05:31 PM »
The first 4' rule I purchased was with a hook stop. The 2nd 4' rule I purchased was with a rule stop. Eventually I removed the hook stop because it was always in the way. I don't even know where it is any more. I use the rule stop all the time.

Be careful not to leave the ruler exposed for long periods in sunlight. The red anodizing fades to a light pink and in bright light, there's very little contrast between the faded red and the white markings, making them virtually impossible to see. That's the reason I own 2 of them. The new one for use outside while the old one can only be read in side the shop under soft illumination.

Check out the photo...some of the markings on the original rule are still difficult to read even under shop conditions.

I only have one WP tool (a big carpenter square form) and it arrived with a wimpy color looking more like the lower tool than the richly colored upper. May be why I haven't bought another...

Offline Cheese

  • Posts: 3729
Re: Help me figure out which Woodpecker rule to get
« Reply #12 on: November 27, 2017, 01:02 PM »
Would the fading issue not be part of the lifetime guarantee?  Particularly if it inhibits the ability to read the scales?

Please report back. I'd be interested to hear what they have to say. There is a very low probability of my tools being exposed to the sun, but after investing thousands into their brand, I'd like to hear how this is handled.

Many thanks  [not worthy] [not worthy]  to @McNally Family for the suggestion of traveling the warranty route. Woodpeckers should be receiving the rule this Wednesday, at which time they will send me a replacement item. Hey @egmiii , below is the email I received from Woodpeckers.

"I do apologize for the fading.  We don’t normally recommend any of the anodized tools be used outside, due to the fact the sunlight will cause fading.  If you would like to ship the rule back to us, we will gladly do an exchange for a new 1.  But in the future, please try to keep it away from direct sunlight."

Online egmiii

  • Posts: 62
Re: Help me figure out which Woodpecker rule to get
« Reply #13 on: November 27, 2017, 04:02 PM »
Appreciate the follow up. Hopefully I never need to go through the warranty process, but it's good to hear they did the right thing, just in case.