Author Topic: TSO Products GRS-16 Guide Rail Square video.  (Read 9364 times)

0 Members and 1 Guest are viewing this topic.

Offline RKA

  • Posts: 863
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #30 on: May 03, 2017, 10:49 AM »
-Raj

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline copcarcollector

  • Posts: 1333
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #31 on: May 03, 2017, 02:20 PM »
What is the workbench being used in the video?

The black bench with dog holes is the Kreg Mobile Project Center

http://www.toolnut.com/kreg-kws1000-mobile-project-center.html


Offline supimeister

  • Posts: 76
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #32 on: May 03, 2017, 10:17 PM »
@TSO Products can you divulge additional details on the GRS16 accessories that you are working on - what additional functionality are you hoping to provide via the accessory?

Offline TSO Products

  • Retailer
  • *
  • Posts: 428
    • TSO Products
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #33 on: May 03, 2017, 11:22 PM »

@supimeister  - see reply  # 296 on the Thread about the original GRS-16 Post.
We will introduce an accessory for the GRS-16 and GRS-16 PE GUide Rail Squares which wwill permit you th not only square up the rail to the workpiece but simultaneously set the edge distance from the left side (call it a parallel guide accessory).

It will be designed to be usable at each end of a longer cut using the GRS-16 PE to which this accessory will also  fit (designed to face in the opposite direction as well).

Putting the adapter holes in the production GRS-16 series "leaked" this piece of marketing information  but "we cannot tell a lie" - so we patiently hear the question and answer it too.  Too bad we're still using "old technology" where have to complete a design, prototype, Beta test it, go back and improve what comes up short, test some more,... finally get ready to launch production and eventually start shipping. That's why it will ship after Labor Day as far as we can see right now.

With the MTR-18 and PTR-18  Triangles in production and shipping now, we can turn our full attention to completing this GRS-16 accessory.
Hans
info@tsoproducts.com
 
TSOproducts.com
Transport Store Optimize
Home of the GRS-16 and GRS-16 PE Guide Rail Squares - and the MTR-18 Triangle

Offline supimeister

  • Posts: 76
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #34 on: May 03, 2017, 11:26 PM »
Ah, I totally missed that post - thanks for your gracious and speedy response!

Offline SS Teach

  • Posts: 235
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #35 on: May 04, 2017, 06:32 PM »
After seeing the video mine is in the mail as I post this.
RTS 400, LS 130, Sandpaper Systainer, Profile Systainer. ETS 125, Sandpaper Systainer, Ro 90, Sandpaper Systainer,  Ro 150, Sandpaper Systainer, OF 1400, TS 55 REQ, CT36, CXS Li 1.5 Set, Centrotec Wood-Drill-Set/8pcs, CT Wings, Surfix Set.

Offline ben_r_

  • Posts: 651
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #36 on: May 05, 2017, 11:14 AM »
Did you guys see the custom made green versions?


Apparently the guy just ordered them pre-anodized and had them done green somewhere else.


I think Id prefer to have one done clear (silver). I think it would match the rail nicely.
If at first you don't succeed, redefine success!

Offline tazprime38

  • Posts: 221
Re: TSO Products GRS-16 Guide Rail Square video.
« Reply #37 on: July 12, 2017, 05:37 PM »

@supimeister  - see reply  # 296 on the Thread about the original GRS-16 Post.
We will introduce an accessory for the GRS-16 and GRS-16 PE GUide Rail Squares which wwill permit you th not only square up the rail to the workpiece but simultaneously set the edge distance from the left side (call it a parallel guide accessory).

It will be designed to be usable at each end of a longer cut using the GRS-16 PE to which this accessory will also  fit (designed to face in the opposite direction as well).

Putting the adapter holes in the production GRS-16 series "leaked" this piece of marketing information  but "we cannot tell a lie" - so we patiently hear the question and answer it too.  Too bad we're still using "old technology" where have to complete a design, prototype, Beta test it, go back and improve what comes up short, test some more,... finally get ready to launch production and eventually start shipping. That's why it will ship after Labor Day as far as we can see right now.

With the MTR-18 and PTR-18  Triangles in production and shipping now, we can turn our full attention to completing this GRS-16 accessory.
Hans
info@tsoproducts.com

Hi Hans, hope you are welĺ.

Regarding your pending parallel guide attachment , will this make my festool parallel guides obselete enabling me to sell them off?

Tariq

@TSO Products

<<EDIT:  inserted mention so that it would be more visible to TSO - Peter Halle - Moderator>>
« Last Edit: July 12, 2017, 06:03 PM by Peter Halle »