Author Topic: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse  (Read 1231 times)

0 Members and 1 Guest are viewing this topic.

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
*FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« on: September 14, 2014, 05:31 AM »
No obligation, but a limit of one blade per address. There are 4 to choose from:

http://promotions.mkmorse.com/Default?promo=recip

Promo is only good in the USA, and only while supplies last, so order yours TODAY if you want one.
Trying to be one of the most helpful members on the FOG.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline GreenGA

  • Posts: 874
  • JR
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #1 on: September 14, 2014, 07:18 AM »
Tried a few times and the app crashed on the server end.

:(
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline GreenGA

  • Posts: 874
  • JR
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #2 on: September 14, 2014, 07:33 AM »
Figured out the app error; and may be the cause for other errors over the years.

Many app developers cannot handle "New Jersey" as a state name, it must be NJ. :(

Similar to other app developers that cannot handle upper case letters or a hyphen in an email address...

 [dead horse]
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline kmdwoodwork

  • Posts: 81
    • kmdwoodwork.com
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #3 on: September 14, 2014, 08:02 AM »
Thanks for the heads up, i love free stuff. And thanks to GreenGa for the tip, it crashed on me my first try also.

Offline John Bates

  • Retailer
  • *
  • Posts: 209
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #4 on: September 14, 2014, 09:10 AM »
I'll find out if there can be a similar offer on the right side of the Atlantic
Manufacturer's agent and importer, representing or importing, CMT Orange, Veto Pro Pac, Flexifoam, Fastcap, Armor Tool Co, Cable Clamps,  Colt Maxicut and Rotastop wave shaft forstner bits, Bruns Tool holders, Rolgear screwdrivers. Thingamajig scribing tool. Sharpedge. RevMark Markers, Occidental Leather and Martinez Hammers

Offline downtheroad

  • Posts: 126
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #5 on: November 19, 2014, 12:49 PM »
Thanks, Wow.
Just received my free blade.
Tony

Offline roblg3

  • Posts: 751
  • Transforming into a whole new machine
Re: *FREE* reciprocating saw (Sawzall) blade from M. K. Morse
« Reply #6 on: November 19, 2014, 07:03 PM »
They were overwhelmed....offer over
Rob Gardner
Operator
RL3 Enterprises