Author Topic: Bosch Hose End Fits 36mm  (Read 1341 times)

0 Members and 1 Guest are viewing this topic.

Offline T. Ernsberger

  • Posts: 801
Bosch Hose End Fits 36mm
« on: March 11, 2017, 08:43 PM »
I just bought a Bosch JS572EBL Jigsaw.  It comes with a hose adapter that fits the Festool 36mm hose. 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline T. Ernsberger

  • Posts: 801
Re: Bosch Hose End Fits 36mm
« Reply #1 on: March 11, 2017, 08:43 PM »
Another Picture

Offline DrD

  • Posts: 395
  • I might not be fast BUT I sure am slow
Re: Bosch Hose End Fits 36mm
« Reply #2 on: March 11, 2017, 08:55 PM »
That looks like the same tool-end fitting that comes on the 36mm Bosch non-as hoses which routinely sell on ebay for $30 or less.

DrD
Dr.D

Offline RustE

  • Posts: 166
Bosch Hose End Fits 36mm
« Reply #3 on: March 11, 2017, 09:53 PM »
The first picture also looks somewhat like the tool end on the Bosch variable suction adapter.  Think I bought mine from Amazon for $20 and use it with a Fein Turbo II connected to a Festool sander.

Offline NVA_WW

  • Posts: 245
Re: Bosch Hose End Fits 36mm
« Reply #4 on: March 12, 2017, 07:09 AM »
Is it the Bosch VAC024 adapter?

Offline T. Ernsberger

  • Posts: 801
Re: Bosch Hose End Fits 36mm
« Reply #5 on: March 12, 2017, 10:19 AM »
Is it the Bosch VAC024 adapter?

Yes that's the right number.  I tried it out on my 36mm Festool and it worked perfectly.  It didnt work on my older Fein Turbo II house.

Offline rst

  • Posts: 1458
Re: Bosch Hose End Fits 36mm
« Reply #6 on: March 12, 2017, 11:48 AM »
I bought the Bosch anti staic hose quite a while ago...didn't like the ends so I put Festool ends on.  I have for of the Fein hoses, the diameter is in between the 27 and 36mm Festools.  I bought 27mm male ends and removed the threaded hose parts and stuck on the Festool end and secured with silicone tape.  Now I no longer need adaptors to use my Fein hoses with my Festoys.

Offline RustE

  • Posts: 166
Bosch Hose End Fits 36mm
« Reply #7 on: March 12, 2017, 12:53 PM »
Yes that's the right number.  I tried it out on my 36mm Festool and it worked perfectly.  It didnt work on my older Fein Turbo II house.

I think the older Fein Turbo II (p/n 9-20-25) uses the 1-1/4 inch (~32mm) diameter hose.  The current Fein Turbo II (p/n 9-20-28) uses the 1-3/8 inch (~35mm) diameter hose.

The Bosch VX120 tool adapter works with the quick-connect end fittings on the 1-3/8 inch diameter hose and connects more easily with Festool dust ports than the Fein tool adapter.
« Last Edit: March 12, 2017, 02:57 PM by RustE »

Offline pixelated

  • Posts: 57
Re: Bosch Hose End Fits 36mm
« Reply #8 on: March 12, 2017, 01:25 PM »
I use that adaptor (Vac024) to go from my Bosch glide saw to my Festool hoses. Actually, it fits both the 27mm and the 36, the 36 will slip over it, and the 27 fits inside.