Author Topic: Cyclone unit or single stage plus dust deputy?  (Read 933 times)

0 Members and 1 Guest are viewing this topic.

Offline ffhend26

  • Posts: 5
Cyclone unit or single stage plus dust deputy?
« on: May 09, 2017, 05:36 PM »
I am in need of dust collection for garage shop.  Mainly for table saw, router station, drill press and miter saw.  Not opposed to attaching each tool at a time with flex hose.  Tired of reading same old forum posts or ads about which is better.  Just confuses my decision more.  So my question is, do I buy a cyclone unit or a 2hp single stage and add dust deputy and filter?  After all accessories the 2nd option is going to be about 300 cheaper.  Anyone with experience one way or another will definitely help.
Thanks
Brian

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dovetail65

  • Posts: 4594
    • Rose Farm Floor Medallions and Inlays
Re: Cyclone unit or single stage plus dust deputy?
« Reply #1 on: May 09, 2017, 05:53 PM »
Cyclone by far.

I got rid of all my dust deputy's.

To me those are for people trying to upgrade what they have. I never understood why anyone that had money for a good cyclone to start would even mess with it.

I had 3 dust deputy(sold two of them here). I also own two Jet single stage, one is a newer 2HP vortex and one is an older model, both with the Dust Dog Type Drum top filter.  I also owned a 3HP cyclone I replaced with a 5HP Grizzly Cyclone. I have a Harbor freight 2 HP hooked to a CNC as well, with an upgraded drum filter top. I sold off a 1.5 HP Delta that was hooked to a DD. So I think I have had a nice bunch to compare.

The cyclones are the best.

Now a couple companies have portable roll around cyclones and I would get one of those in a heartbeat.
« Last Edit: May 09, 2017, 10:58 PM by Dovetail65 »
The one who says it can't be done should avoid interrupting the person doing it.

Offline Dick Mahany

  • Posts: 107
Re: Cyclone unit or single stage plus dust deputy?
« Reply #2 on: May 09, 2017, 06:17 PM »
Just do a cyclone and be done with it.  I initially went a single stage unit coupled with a cyclone type separator.  The problem was that the really fine dust still could make it through the single stage bag.  In addition the separator reduced the CFM of the single stage which was was already strained.  I sold those and got a 3HP Oneida V3000 w/HEPA filter and plumbed my garage with 6" sewer/drain PVC.  I wish I done that to begin with. 


I recently downsized and couldn't fit the cyclone in my new shop, so I have now (regrettably) gone the HEPA shop vac/dust deputy way.  It works, but nowhere near as well as the cyclone.  The cyclone made a huge improvement when used with my planer, table saw and router table with above and below dust collection.
« Last Edit: May 09, 2017, 06:48 PM by Dick Mahany »

Online ben_r_

  • Posts: 791
Re: Cyclone unit or single stage plus dust deputy?
« Reply #3 on: May 09, 2017, 06:30 PM »
Cyclone IMO. I have the Onieda V-3000 as well and LOVE it!
If at first you don't succeed, redefine success!

Offline ffhend26

  • Posts: 5
Re: Cyclone unit or single stage plus dust deputy?
« Reply #4 on: May 09, 2017, 08:10 PM »
I know the short cyclone portable units (jet, laguna) get bad reviews but they are convenient and accessible. Are they worth the investment?  Half the price of Oneida and not as tall.