Author Topic: Just coped crown molding with this....worked great  (Read 903 times)

0 Members and 1 Guest are viewing this topic.

Offline Ajax

  • Posts: 186
Just coped crown molding with this....worked great
« on: June 02, 2018, 07:16 PM »
I just added crown molding to a small bathroom. My wife loves it and it came out great.  This was my first crown molding experience.  I followed Gary Katz’s book on finish carpentry and made a coping box and coped the left end of each trim piece (the bathroom has only 4 inside corners). My Kapex with multi-blade extensions and a sacrificial crown stop worked great.  The coping was done with this baby...

It comes with an optional rounded base that is basically a coping foot. You do need to buy a 12v Proxxon transformer for it, but I already have a few of those. I have larger Bosch jigsaws, but I didn’t want to spend the bucks on a coping foot since I already had the Proxxon (I bought a bunch of Proxxon tools for my kids to use on craft projects).

What makes this tool effective is it’s very small size.  I found it easy to manipulate.  And since I was cutting pine molding it cut through it easily.
« Last Edit: June 02, 2018, 07:23 PM by Ajax »
Kapex KS120, MFT/3, TS55 REQ, RTS400, RO90 DX FEQ, D90 Assortment, RO150 REQ, ETS 150/3, PRO5, D150 Assortment, DF 500, Domino 4/5/8/10 Assortment, DF700 XL, Domino 12/14 Assortment,  CT Midi, MFT/3, Kapex MFT, 2 x SysRoll

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Sparktrician

  • Posts: 3519
Re: Just coped crown molding with this....worked great
« Reply #1 on: June 03, 2018, 08:37 AM »
I've been using the Carvex with a Collins Coping Foot for the same function.  That said, I can see how a small, light tool like the Proxxon could be quite useful. 
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline RKA

  • Posts: 1052
Re: Just coped crown molding with this....worked great
« Reply #2 on: June 03, 2018, 09:31 AM »
I actually prefer a jigsaw with the coping foot.  The larger blade hogs away the waste much quicker and I’m able to maintain a high level of control.  I’ll usually get within 1/16-1/32” of the cut line then finish the edge with a rasp by hand (completely unnecessary, but the extra minute is not a big deal to me).  I’ve never tried it with a smaller machine, but I imagine the smaller blade wouldn’t not allow a side to side “sweeping” action, so you would be limited to a scrolling cut along the line, which may be where it is more advantageous than a clunky jigsaw with a thicker blade.

Offline wwb119

  • Posts: 6
Re: Just coped crown molding with this....worked great
« Reply #3 on: June 16, 2018, 11:31 PM »
Ajax - congrat's on bathroom crown, you're the family hero now !    I've also been following Katz instructions (on youtube).  I've been using a 12V Bosch jigsaw and a Collins coping foot.  Like RKA, I get fairly close with the saw, then I use sandpaper molded to a trim scrap (Katz) to sort of flush sand the finish.  I agree a couple extra minutes seems to make the fit much better.
I'm a beginner at crown;  it's satisfying when it turns out.  good luck ....