Author Topic: Metabo Battery woes  (Read 1225 times)

0 Members and 1 Guest are viewing this topic.

Offline Lbob131

  • Posts: 439
Metabo Battery woes
« on: May 30, 2015, 12:44 PM »
I  foolishly  let   one of  my  Metabo 18v Lithium Ion batteries  get some   water inside  in the form of rain.

It's  well dried now  but  seems dead.  The indicator  lights  will   light up  indicating full charge  though.
Just wondering  if anyone had anything similar happen?

« Last Edit: May 30, 2015, 12:51 PM by Lbob131 »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline DB10

  • Posts: 911
Re: Metabo Battery woes
« Reply #1 on: May 30, 2015, 07:13 PM »
If it was me I would contact Metabo and see what they say, as down here all Metabo 18v batteries come with 3 year warranty, Not sure what the deal in Europe is.

Offline DirtyOldMan

  • Posts: 31
Re: Metabo Battery woes
« Reply #2 on: May 30, 2015, 09:50 PM »
I had something similar happen to me with a makita Lion battery after getting wet.

Lion battery packs usually have electronics in them to monitor things like excessive rate of discharge and overheating to prevent them from exploding.

Unfortunately it sounds like the water damaged the electronics and its unlikely it will be economical to repair. The cells will be fine though and you could possibly hang on to them to use as replacements down the track. Not sure if its worth the trouble though.

Offline GhostFist

  • Posts: 1556
Re: Metabo Battery woes
« Reply #3 on: May 30, 2015, 10:20 PM »
Three year warranty in North America as well. Call your dealer

Offline Lbob131

  • Posts: 439
Re: Metabo Battery woes
« Reply #4 on: May 31, 2015, 08:21 AM »
I've tried it  in my metabo   LED   torch light  and  all seems   OK.

However  in  the   drill, the motor   runs for a few seconds  then   drops down  to a very low rpm.
Not quite right yet.