Author Topic: Metabo  (Read 41713 times)

0 Members and 1 Guest are viewing this topic.

Offline festoolman

  • Posts: 42
Metabo
« on: March 14, 2009, 12:14 PM »
Can anyone tell me their experience with Metabo tools?  I am not very familiar with their products.  Any info would be great, thanks, Leon.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline EcoFurniture

  • Posts: 608
    • Eco Furniture
Re: Metabo
« Reply #1 on: March 14, 2009, 01:05 PM »
Back in Germany, when working in the woodworking industry, Metabo was at the same level as Festool. Quality is, in my mind, outstanding and the tools are worth the money.


Offline Frank-Jan

  • Posts: 1042
  • Dutch Canadian living in Belgium
Re: Metabo
« Reply #2 on: March 14, 2009, 01:22 PM »
My experience with metabo only consist of 2 not so good corded hammerdrills. But a lot of professionals really like their sds+ rotary hammers and little angle grinders (I myself prefer bosch for those tools)

Offline darkstar

  • Posts: 51
Re: Metabo
« Reply #3 on: March 14, 2009, 05:04 PM »
I Just bought a Metabo kgs 303 10" sliding miter saw - precision build. Used it for five days now and like it. Kind of a no frills machine, with excellent dust control (with the purchase of optional dust kit), and is very quiet. It wieghs 42 pounds and its fairly compact.

Offline Peterm

  • Posts: 262
  • I work with wood in West London, UK
    • carpenterhandyman
Re: Metabo
« Reply #4 on: March 16, 2009, 03:49 PM »
Can anyone tell me their experience with Metabo tools?  I am not very familiar with their products.  Any info would be great, thanks, Leon.

Positive experience all round; well  made, good value. The KGS 255 was my first SCMS - still is, though I bought mine when they were branded 'Elektra Beckam'. I've had a 6" Metabo dual orbit sander ( 400 duo SXE something??) forever, and it's a great bit of kit, though I recently bought an ETS 150/5 and have to say it's a significantly better sander, though more expensive. I also have a Metabo detail sander which is OK (and I'd say no better than OK) but based on my recent experience may consider adding a Deltex before too long.

Metabo don't always get it right - I had a Metabo PowerGrip 4.8v screwdriver that was a shockingly bad design - though they do seem to learn; the latest version (PowerMaxx??) is much better, just launched at the time Bosch and Makita were turning to 10.8v cordless tools....

So yes, well made, good value; probably not the best in any sector, but I'd say far, far from the worst.

Hope this helps, Pete
The only thing worse than spending more than you need is spending less than you should have...

Offline Frank-Jan

  • Posts: 1042
  • Dutch Canadian living in Belgium
Re: Metabo
« Reply #5 on: March 16, 2009, 04:27 PM »
We had an elektra beckum saw too, kgt500, jobsite combination table/mitersaw, very good quality. But I disliked the drills so much I personally wouldn't buy a metabo tool for myself, and I don't like their slogan "work, don't play"... I want my work to be fun ;)

Offline Dave Ronyak

  • Posts: 2234
  • Flyin' from NE Ohio
Re: Metabo
« Reply #6 on: March 16, 2009, 11:05 PM »
I have an Eleckra Beckum single stage dust collector (~3/4 hp, 120 VAC) that has been problem free for many years, but it has not seen that much use.   (I don't bother with DC when planing a lot of rough lumber; I just roll the planer outside.  And now I have a larger cyclone DC.)  Every aspect of the Electra Beckum unit is well thought out and well made, with Bosch electrics.

Dave R.
Friends, family and Festools make for a good retirement.  PCs...I'm not so sure.

Offline Skylar

  • Posts: 28
Re: Metabo
« Reply #7 on: March 17, 2009, 10:06 PM »
Having only used their angle grinders, I find it interesting to hear that their woodworking tools are received with mixed reviews. Their grinders are impossible to kill! Outlast any other brand hands down!

        Skylar

Offline Alex

  • Posts: 6016
Re: Metabo
« Reply #8 on: March 20, 2009, 06:37 PM »
I've got a Metabo jigsaw which I am very fond of, it is a delight to work with it, strong, precise and runs very smoothly with a low noise. I've got it over 10 years now and though I'm not a pro who uses it every day I've cut quite some wood with it by now. It never lets me down. This machine is an absolute winner in my opinion.

I also have a Deltex type detail sander, I've had it also for more than 10 years and the story is basically the same as with the jigsaw, good to work with, strong,  low noise and good to handle. I was always very fond to work with it. I have to say 'was', because it broke down not long ago, even though I haven't used it that much or that intensive. I thought it might just be the coal brushes so I opened the sander to see if I could replace them, but then I found this wasn't the problem, unfortunately.

Instead I saw that the ball bearing of the axle in the head had melted through the rims of the plastic casing it rested on. I couldn't believe what I saw, I regard this as a serious design flaw.  The head is where you press down on the machine to get a good grip on your workpiece, and when the axle revolves through the ball bearing it can generate some serious heat. And all that rested on some plastic that was hardly one mm thick. I was very disappointed with this. I have yet to contact their customer service to confront them with this but I will do so shortly and find out what they think is a good solution to solve my problem.

But when you buy Metabo you have to keep in mind that the company has fallen for the big hobby market. You can't simply think "Oh, Metabo is Metabo". The quality of their machines is not the same for all. They have brought out cheaper models to appeal to hobby users also, and not just solely professionals. You have to keep an eye on the price. Their cheaper models are priced at about the same as brands as Black & Decker and green Bosch. The quality of those machines is only slightly better than B&D or green Bosch but not comparable with professional machines. However, if you buy a more expensive machine you'll be sure to get the professional quality.

« Last Edit: April 03, 2009, 05:25 PM by Alex »

Offline Tom Bainbridge

  • Posts: 1009
  • Limey Carpenter
Re: Metabo
« Reply #9 on: April 03, 2009, 04:19 PM »
i have a metabo long nose die grinder for removing rotten wood FAST, for this job, nothing beats it

with all tools like this dust / chip suppression......... forget it


AND

wear ski goggles to protect you eyes unless you want a trip to A&E

Bromley, Kent. UK

aka dirtydeeds

Offline plino

  • Posts: 6
Re: Metabo
« Reply #10 on: April 04, 2009, 01:03 AM »
In New Zealand Metabo has had some problems with there Grinders. I suspect it might be related to the fact that all there tools are made in China?

Plino

Offline extiger

  • Posts: 254
Re: Metabo
« Reply #11 on: April 05, 2009, 01:02 AM »
My only Metabo tool is the small 4.6volt battery drill. Now that I have a Festool C12 drill, I find that I reach for the Metabo more often. It has a nice feel in the hand.

If I were doing production work, I think I would favor the beefier Festool.

Gary Curtis
Northern California

Offline jo041326

  • Posts: 76
  • Czech republic
Re: Metabo
« Reply #12 on: April 05, 2009, 11:29 AM »
Hi,
I have a Metabo drill hammer and it's a piece of crap - strong vibrations, too much clearance. Very disappointed. I've heard their combo planner thicknesser HC260 was good but now it's made in China and it's useless.
Josef

Offline richard.selwyn

  • Posts: 635
Re: Metabo
« Reply #13 on: April 05, 2009, 03:54 PM »
I used to have an Electra Beckum chop saw - the 303 (?) mentioned above - they still make it as a Metabo, its now blue instead of green.  Very sturdy and still going strong (I gave it to a retired friend) after 15 years.  I have their biggest sliding compound mitre saw which is currently laid up as I'm using the Kapex.  It is very well made, solid and accurate but doesn't have the dust collection of the Kapex (or the old 303).  The only other Metabo I own, apart from the little screwdriver mentioned above,o is their paint remover.  It's an angled grinder motor with are cutter head that uses removable cutter blades like on shaper heads.  It is unique, works really well for rapid paint removal and "wood butchery" and comes in a systainer.  I'm not in the shop so don't remember what its called but I'd recommend it to anyone who does a lot of renovation.  Its probably NAINA  - must be dangerous that head spinning round with those sharp little blades and paint and splinters flying everywhere.  It does have dust extraction but removes so much that even a big Festol vac has trouble.
Hope that helps.

Offline Iggy1965

  • Posts: 6
Re: Metabo
« Reply #14 on: April 05, 2009, 06:01 PM »
I have and had several tools some with real bad experience like the Elektra Beckum miter saw KS2100. It jammed and i'm lucky to still owning my fingers. (it came up 1 foot in the air when it jammed). And some with real good experience like their normal corded drill (high torque). Its really 'China on the label, Trash on the table'. But when 'made in Germany', I like it. Their Belt sanders are the same as Festool. Its the old HolzHerr design.
ts55/ts75/pb300/domino/cms/vs600/cmt/ets125/c12/tdk15+3/of1010/of1400/ctmini/2x800/2x1400

Offline Frans

  • Posts: 113
Re: Metabo
« Reply #15 on: April 08, 2009, 04:32 AM »
I've got a Metabo corded drill, which is excellent, if a bit noisy. My father has one as well, a different model bought around 1980. When he needed some replacement parts in 2005, the bloke on the phone was pleasantly surprised that the machine was still serving well. They dug up the needed replacement parts somewhere, and sent them at no charge!

Frans


Offline Roger Savatteri

  • Posts: 506
    • www.savatteridesigns.com
Re: Metabo
« Reply #16 on: April 08, 2009, 08:32 AM »
.

I have  the Metabo SXE400 Compact Random Orbital Disc Sander with 3 inch discs and I'm very happy with it for when I need an orbital disc action in a tight space.
(very handy when working with fiberglass parts) It's not an everyday sander and falls more into the category of "specialty once in a while sanders".
Dust collection works well and has a foam pad for contour surfaces.
http://www.tools-plus.com/metabo-sxe400.html?utm_medium=feed&utm_source=froogle&utm_term=METSXE400

Review...... http://www.taunton.com/finewoodworking/ToolGuide/ToolGuideProduct.aspx?id=5885




14848-0
« Last Edit: April 08, 2009, 08:38 AM by Roger Savatteri »
Los Angeles, California

Offline Radone

  • Posts: 3
Re: Metabo
« Reply #17 on: November 02, 2010, 06:16 AM »
Bringing this one back to life ;)

Have to kinda agree that Metabo don't alway get it right.

Just bought a Metabo KGS 216 Sliding Compound Mitre Saw as referred to by a mate and my previous experience with Metabo and there's always a place in my heart for German and Austrian wordworking machines and was a field service tech for Felder Group for awhile.

At the sub $600 mark I was a bit hesitant but I did a bit of research and found mostly good reviews and know that Metabo saws are quite accurate, dependable and reliable. Nowhere did anybody have any bad workds to say. Plus, I didn't see the worlds 'Made in China' anyware which I thought was odd at this price range.

Anyway, pulled it out of the box and found hard, lower quality plastics but good quality metals which is more important to me. That explains the price, right? Then I used the slider.... ! Felt like it had a bad bearing. Even an Ozito and Makita clones runs smoother. Maybe not as accurate or sturdy but definitely smoother in the push and pull department. How can I get that wrong, right?

Immediately took it in for warranty service where I am told that that's how it's supposed to be?! Service tech also tells me it is indeed made in China although it doesn't say so anywhere. Very nice guy. Tells me that he'll see what he can do for the bearing and will keep it for a couple of days.

I'm just using the saw for home improvement and investment property renovation but wonder if it's worth taking back due to a rough slide if the tech can't improve it. I haven't cut with it yet but I have heard good things about the saw.

First impressions last a lifetime and on this one, I'm dubious. Any suggestions, recommendations?

Offline harry_

  • Posts: 1275
Re: Metabo
« Reply #18 on: November 02, 2010, 12:58 PM »
See how it is when you get it back. If it is not up to snuff, refund it.
Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).

Offline Radone

  • Posts: 3
Re: Metabo
« Reply #19 on: November 02, 2010, 08:26 PM »
Yeah, that's where I was heading. On one hand you have a otherwise good saw. On the other you have a very noticable annoyance that may not affect performance but diminishes your overall product ownership happiness.

I'll let you guys know how it goes.

Offline bonesbr549

  • Posts: 543
  • I'd rather be woodworking
Re: Metabo
« Reply #20 on: November 02, 2010, 09:15 PM »
I bought a small driver set made by Metabo that was soso at best.

Offline GhostFist

  • Posts: 1556
Re: Metabo
« Reply #21 on: November 02, 2010, 10:45 PM »
Contractor i was working with was all proud of his cordless 18v Metabo drill until it dropped a foot and the chuck snapped off because it was all cheap plastic. Never looked at their tools since.

Offline richard.selwyn

  • Posts: 635
Re: Metabo
« Reply #22 on: November 06, 2010, 09:47 AM »
I recently bought the smallest, cheapest Metabo chop saw (I also own their biggest see above)
I did not expect much - it was 99 euros - but it is the lightest - at 9kg - I could find for lugging around (I hate lugging heavy tools up flights of stairs in peoples' homes.)
Anyway, it is about what you would expect for 99 euros (pretty rough), but having installed a Festool blade - which is worth almost as much as the saw- it does give reasonable cuts.  I couldn't see any mention of where it was made anywhere, but it certainly looks and "smells" Chinese. 
That said, this is being typed on a 1500 euro chinese built computer so I know that made in China doesn't necessarily mean cheap rubbish.  I just wish some of these European companies (Jet is Swiss owned for example) set out more exacting standards for their Chinese partners.

I would like to buy a better saw but cannot find anything that compares weight wise. (Apart from the Festool Sysmetric saw which I can only use for small moldings)

Richard

Offline Radone

  • Posts: 3
Re: Metabo
« Reply #23 on: November 08, 2010, 12:19 AM »
Very good point; the weight: 14kgs. I hurt my back awhile ago and can't be lugging this thing around when I do use it. Also, cross cut width (305mm), 5,000 rpm idle/3756 rpm rated load and 1.5kw input power seems pretty darn good for a 216mm. I can see me putting a better blade on it as well. I can't wait to actually cut with it.

Speaking of, it's still in the shop to get the warranty replacement bearings put on. The shop has had it longer than I have. I turned it in at three days old and they've had it for about a week and a couple of days now waiting for bearings that are on back order. It sure will be nice to use the thing.  ::)

Offline aloysius

  • Posts: 333
Re: Metabo
« Reply #24 on: November 08, 2010, 03:41 AM »
I've been using Metabo tools for 30 odd years, & overall I'm impressed.
Their corded drills are probably the best available.  I have 3.
Their grinders are the longest lasting, most reliable tools money can buy.  They're a firm favourite with engineering and steel fabrication workshops.  I have 3 of these also.
Their cordless tools, however, aren't really all that good.  I've had quite a few: 1 driver, 5 drills, a circular and a saber saw.
Their sanders are excellent, complimented by reasonable quality sandpapers and absolutely woeful intermediate pads, that self destruct even before use!
Overall I'd rate their corded drills and grinders as the best professional tools available.
Their cordless tools, however, I'd rate as only on a par with Festool's (in other words not really as good as alternative brands).
Their sanders, however, aren't nearly as good as Festool's equivalents.  Festool is the world's premier manufacturer of sanders.
FOG-wit since '95:  Some say since birth...

Offline lerabotperche

  • Posts: 40
    • What I do and how I do it :)
Re: Metabo
« Reply #25 on: May 29, 2019, 02:39 AM »
any others reviews for the last nine years ?

Their 12v drills look nice but I'm looking for reviews (and for 18v tools) for cabinet making and carpentry :)

Offline Sanderxpander

  • Posts: 362
Re: Metabo
« Reply #26 on: May 29, 2019, 09:45 AM »
They just "upgraded" to a new 12V battery platform, I've used the older 10.8V one and really liked it, the quick chuck is great and it has plenty of power. Mafell rebrands these with a few small modifications, which should really say enough.

Offline JimH2

  • Posts: 803
Re: Metabo
« Reply #27 on: May 29, 2019, 10:37 AM »
To be clear for those in the United States there are two different Metabo companies: Metabo and Metabo HPT (formerly Hitachi Power Tools). A reasonable person would assume the cordless products would be compatible between the two, but they are not. Why there would not be consolidation of the cordless platform is beyond belief and will lead to customer confusion and eventually disappointment. The travesty is that Metabo and several other European manufacturers (Mafell being one of them) came together to design a battery pack that is compatible across manufacturers.

Some will say this is bad and full of compromises, but that is not the point of my posting, which (2) Metabo's with zero compatibility.

Offline Svar

  • Posts: 1749
Re: Metabo
« Reply #28 on: May 29, 2019, 12:31 PM »
To be clear for those in the United States there are two different Metabo companies: Metabo and Metabo HPT (formerly Hitachi Power Tools). A reasonable person would assume the cordless products would be compatible between the two, but they are not. Why there would not be consolidation of the cordless platform is beyond belief and will lead to customer confusion and eventually disappointment.
Hitachi acquired Metabo only in 2016. Obviously, with millions of units in circulation from both companies they can't suddenly make them compatible. They will have to support both platforms for a while. Perhaps new models will be the compatible.
« Last Edit: May 29, 2019, 01:12 PM by Svar »

Offline JimH2

  • Posts: 803
Re: Metabo
« Reply #29 on: May 29, 2019, 01:19 PM »
Metabo's plan moving forward is to maintain separate platforms according to several articles I have read. Considering they do not share a common website at this point (3 years in) I don't anticipate any other changes. Marketing wise they should have just kept the Hitachi name until they could make the changes necessary to share battery technologies.

Online Jiggy Joiner

  • Posts: 572
Re: Metabo
« Reply #30 on: May 30, 2019, 03:08 AM »
The only Metabo I’ve ever owned was, many years ago when I used to buy fixings in bulk from a supplier. One time we ordered a real big amount of various screws and fixings. They handed me a Metabo cordless drill/driver brand new in a case with two batteries.
Could you trial this and let us know your thoughts? they said. Sure I said.
Anyway, being used to Makita drill/drivers, I couldn’t get on with it, and neither could anybody else that used it.
I eventually returned it to the supplier with a not so good report. They said thanks, but keep it as a thank you for doing the trial, and being a good customer.
I couldn’t give it away, it sat in storage for years until I threw it away a few weeks ago when clearing out.

I know many people swear by Metabo, it’s not for me though, even the modern stuff.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline JimH2

  • Posts: 803
Re: Metabo
« Reply #31 on: May 31, 2019, 09:38 AM »
The only Metabo I’ve ever owned was, many years ago when I used to buy fixings in bulk from a supplier. One time we ordered a real big amount of various screws and fixings. They handed me a Metabo cordless drill/driver brand new in a case with two batteries.
Could you trial this and let us know your thoughts? they said. Sure I said.
Anyway, being used to Makita drill/drivers, I couldn’t get on with it, and neither could anybody else that used it.
I eventually returned it to the supplier with a not so good report. They said thanks, but keep it as a thank you for doing the trial, and being a good customer.
I couldn’t give it away, it sat in storage for years until I threw it away a few weeks ago when clearing out.

I know many people swear by Metabo, it’s not for me though, even the modern stuff.

I don't think your one-time use of a drill "many years ago" really adds anything to the discussion other than noise.

Online Jiggy Joiner

  • Posts: 572
Re: Metabo
« Reply #32 on: May 31, 2019, 01:37 PM »
The only Metabo I’ve ever owned was, many years ago when I used to buy fixings in bulk from a supplier. One time we ordered a real big amount of various screws and fixings. They handed me a Metabo cordless drill/driver brand new in a case with two batteries.
Could you trial this and let us know your thoughts? they said. Sure I said.
Anyway, being used to Makita drill/drivers, I couldn’t get on with it, and neither could anybody else that used it.
I eventually returned it to the supplier with a not so good report. They said thanks, but keep it as a thank you for doing the trial, and being a good customer.
I couldn’t give it away, it sat in storage for years until I threw it away a few weeks ago when clearing out.

I know many people swear by Metabo, it’s not for me though, even the modern stuff.

I don't think your one-time use of a drill "many years ago" really adds anything to the discussion other than noise.

The OP asked for Metabo experience, so I posted mine. Not that it’s any of your business, and the only thing you’re adding to the discussion is abruptness.
The point of my post was, I’m saying I wouldn’t have Metabo as a gift. This obviously went over your head?

When my experience with the drill took place, Metabo were a lot more respected than they are now.
In my country, most users of decent tools, use Japanese or German, or the U.S. brand De Walt. We have a good choice of brands including Metabo, and I can tell you for fact, Metabo are one of the least seen tools on the many sites I am on, week in, week out. What does that tell you?

I have had good experience with the older Hitachi tools btw.

If I am able to give any more input to the thread, I shall, and if I get too noisy for you, put your ear defenders on, or maybe be polite and keep quiet?


Offline demographic

  • Posts: 501
Re: Metabo
« Reply #33 on: May 31, 2019, 04:20 PM »
I don't think your one-time use of a drill "many years ago" really adds anything to the discussion other than noise.

Seemed like a reasonable answer from a person that wasn't blown away by a product to me.

I have a Metabo Steb 140 jigsaw, its not the best jigsaw I've  used, nor the worst. It's OK. Its got an LED light that goes on when I pick it up, seems like a better idea is just having the light on when its connected to a live cable so I can tell at a distance that its on.

You OK with me having a fairly vague opinion are you?

Online Jiggy Joiner

  • Posts: 572
Re: Metabo
« Reply #34 on: June 01, 2019, 06:19 AM »
I don't think your one-time use of a drill "many years ago" really adds anything to the discussion other than noise.

Seemed like a reasonable answer from a person that wasn't blown away by a product to me.

I have a Metabo Steb 140 jigsaw, its not the best jigsaw I've  used, nor the worst. It's OK. Its got an LED light that goes on when I pick it up, seems like a better idea is just having the light on when its connected to a live cable so I can tell at a distance that its on.

You OK with me having a fairly vague opinion are you?

 ;)

Offline RKA

  • Posts: 1635
Re: Metabo
« Reply #35 on: June 01, 2019, 06:54 AM »
The vagueness he refers to is “I couldn’t get on with it”.  It doesn’t elaborate on the reasons why he didn’t like it.  Then we have added that nobody else on jobsites uses it.  Again, why?  Is the platform of tools insufficient, is the support poor in some way, do the tools fail, do they lack in ergonomics, do the batteries take too long to charge, does the color clash with your trousers?  Obviously there are specific reasons, but if we fail to bring them to light, how is anyone supposed to parse out those shortcomings and decide what is or isn’t important for their intended use?

So if there are specific observations you would like to add, great, let’s hear them.  Otherwise let’s not keep adding to the noise here.
-Raj

Offline ChuckM

  • Posts: 1135
Re: Metabo
« Reply #36 on: June 01, 2019, 07:11 AM »
I hear noise when someone is complaining about another member making a noise. That abrupt, rude remark is uncalled for and unnecessary.  [eek]

Are we trying to practise censorship here?

Granted, if a member wanted another member to expand or clarify his or her comment, just ask. Why use a provocative sentence. I could equally argue what makes any of you an undisputed authority on a topic that another member contributes to.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11941
Re: Metabo
« Reply #37 on: June 01, 2019, 08:29 AM »
Please let’s not let this thread go further south.

Peter Halle-Moderator

Online Jiggy Joiner

  • Posts: 572
Re: Metabo
« Reply #38 on: June 01, 2019, 08:50 AM »
The vagueness he refers to is “I couldn’t get on with it”.  It doesn’t elaborate on the reasons why he didn’t like it.  Then we have added that nobody else on jobsites uses it.  Again, why?  Is the platform of tools insufficient, is the support poor in some way, do the tools fail, do they lack in ergonomics, do the batteries take too long to charge, does the color clash with your trousers?  Obviously there are specific reasons, but if we fail to bring them to light, how is anyone supposed to parse out those shortcomings and decide what is or isn’t important for their intended use?

So if there are specific observations you would like to add, great, let’s hear them.  Otherwise let’s not keep adding to the noise here.

Ok, I like to be fair, and reasonable, so I'll elaborate a little more on the drill.
At the time of being presented with the drill/driver I was a user of mainly Makita tools both corded and cordless, and a fair bit of Elu, routers, table and mitre saws etc.
So, we had plenty of Makita cordless drill drivers. The supplier was a Metabo stockist, and was constantly trying to covert me to the brand.
When he gave me the drill, although brand new, it looked old and outdated in design, and did not have the ergonomics of my drills or any other current brand offerings.
It is still in the skip outside of the workshop, if I can find an old Makita of the time, I'll post pics up of both, so that everybody can see what I'm talking about.
The drill reverse switch, was a flimsy plastic paddle that protruded out between the top of the trigger and the casing, looked like it would last about 5 minutes. The tool was not balanced or comfortable, lacked power, had terrible battery life, and also a lengthy battery charge time.
It was a world away from the Makitas of the time, or anything else. It resembled a cheap DIY centre tool, or an occasional use tool for a handy man.
Four or five of us tried it out, for the working week but, nobody liked it, nobody had anything good to say about it. As I said, I couldn't give it away.

Not my own experiences but, I have friends and colleagues that have owned various Metabo tools, and the feedback hasn't been great, or mediocre at best. I know somebody that had untold problems with a Metabo planer thicknesser, another with a mitre saw that was replaced three times before a refund. They have had major issues with grinders too.
Whenever I see anything German manufactured, it nearly always means quality, precision engineering and design, and as a consequence great durability.
The Germans build everything to a very high standard. Houses, cars, guns, tools and just about everything else. I don't now, or have never seen this quality with Metabo, and the fact they were bought by a Japanese company tells me they weren't very successful?
There are almost certainly firm fans of Metabo out there, and I would imagine if that's true, the majority of them are hobbyist or DIY users where products aren't worked so hard, or so frequent as in a professional environment, as I mentioned earlier, I see very little Metabo tools being used on building sites of all types and sizes.
My own experience, and the others that used the drill, was more or less how I expected it to be, after seeing various Metabo tools, and inspecting them, not very innovative in my opinion.

Most of the sites I'm on you'll see mainly, Makita, De walt, Milwaukee, Festool, Fein, Mafell. Sometimes some Panasonic, and some Hitachi, and a fair bit of Erbauer (Screwfix own brand) and some other cheap and cheerful tools but, I really don'y come across much Metabo. Maybe the odd drill etc but, not much at all.
It's not one of the popular brands here, at least professionally. There's probably a reason for that?

Offline RKA

  • Posts: 1635
Re: Metabo
« Reply #39 on: June 01, 2019, 12:23 PM »
That was great! Thanks for elaborating!! 
-Raj

Online Jiggy Joiner

  • Posts: 572
Re: Metabo
« Reply #40 on: June 01, 2019, 03:26 PM »
That was great! Thanks for elaborating!!

You’re welcome  ;)