Pages: [1] 2  All   Go Down
  Print  
Author Topic: Milwaukee Airless/Fine Finish Paint Sprayer Hub Model # M4910-20  (Read 47522 times)
0 Members and 1 Guest are viewing this topic.
morogue

Offline Offline

Location: UNITED STATES (US)
Member Since: Jul 2008
Posts: 27


« on: February 14, 2010, 06:36 PM »

So what is this thing, and has anyone used or seen it?
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

harry_

Offline Offline

Location: Middleton, NH
Member Since: Nov 2009
Posts: 1099



« Reply #1 on: February 14, 2010, 06:39 PM »

got a link?
Logged

Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
Charimon

Offline Offline

Location: Omaha NE
Member Since: Jun 2008
Posts: 652


Tool and Tile Junkie


« Reply #2 on: February 14, 2010, 07:00 PM »

Got this off Google  never seen it before
http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=202019771&langId=-1&catalogId=10053&cm_sp=1c4cdb4b-d1cb-4782-8ca9-995496c1e806



Looks like it promises alot  for under $400

Craig
Logged

"The existence of the flame thrower proves that at one time, somewhere, somebody said, " You Know, There's a group of people over there that I'd like to set on fire right now but they're too far away."
Michael Kellough

Offline Offline

Location: The northernmost end of the southernmost county of New York
Member Since: Jan 2007
Posts: 2121


« Reply #3 on: February 14, 2010, 07:07 PM »

Got this off Google  never seen it before


Looks like it promises alot  for under $400

Craig


"Manufacturer?s suggested retail price is $1,597.00"   Eek! 
Logged
harry_

Offline Offline

Location: Middleton, NH
Member Since: Nov 2009
Posts: 1099



« Reply #4 on: February 14, 2010, 07:30 PM »



"Manufacturer?s suggested retail price is $1,597.00"   Eek! 

yeah, but we all know that with few exceptions MSRP's from American manufacturers are to be taken with a grain of salt
Logged

Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
morogue

Offline Offline

Location: UNITED STATES (US)
Member Since: Jul 2008
Posts: 27


« Reply #5 on: February 14, 2010, 11:29 PM »

It is on home depot's site with some glowing reviews...

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=202019771&langId=-1&catalogId=10053&PID=1319015&cm_mmc=CJ-_-shopping_com-_-D24X-_-202019771&cpncode=22-47512974-2&AID=10368321&cj=true&srccode=cii_13736960

Milwaukee hasn't ever disappointed me (sawzall, worm-drive circ saws, and corded drill), it really doesn't seem possible.

I can't find a store with it within 100 miles of LA.
Logged
Charimon

Offline Offline

Location: Omaha NE
Member Since: Jun 2008
Posts: 652


Tool and Tile Junkie


« Reply #6 on: February 14, 2010, 11:53 PM »

now i am thinking i should grab one in case the price is a mistake.
Logged

"The existence of the flame thrower proves that at one time, somewhere, somebody said, " You Know, There's a group of people over there that I'd like to set on fire right now but they're too far away."
Steve-CO

Offline Offline

Location: Littleton, CO
Member Since: Oct 2007
Posts: 786


« Reply #7 on: February 15, 2010, 12:39 AM »



The ad says on-line only

here's a short video,
Milwaukee ToolTV: Airless/Finish Paint Sprayer M4910-20
« Last Edit: February 15, 2010, 12:48 AM by Steve-CO » Logged
Brice Burrell

Offline Offline

Location: Pittsburgh, PA, USA
Member Since: Mar 2007
Posts: 6473


Remodeling Contractor


WWW
« Reply #8 on: February 15, 2010, 10:46 AM »

now i am thinking i should grab one in case the price is a mistake.

I can't help but thing you're right.
Logged

Check out my new blog, The Green and Dark Blue Blog.
Tom Bellemare
Festool Dealer

Offline Offline

Location: Austin, Texas - USA
Member Since: Nov 2007
Posts: 4116


Festool demo's & personal service in Central Texas


WWW
« Reply #9 on: February 15, 2010, 12:19 PM »

They sold me one. It hasn't shipped yet so we'll see if it does...


Tom
Logged

Tom Bellemare
Customer Svc
Tool Home
www.tool-home.com
512-428-9140
morogue

Offline Offline

Location: UNITED STATES (US)
Member Since: Jul 2008
Posts: 27


« Reply #10 on: February 16, 2010, 06:01 PM »

Well, just was in the Newbury Park CA HmDpt and they have a display and two in boxes. Of course, no one knows a thing about it...
I tried reading the manual, and obtuse would be a compliment. Perhaps someone who uses airless would understand it better.
Is it a "turbine assisted airless" or "pump assisted turbine" in "fine mode"? Does that make up for the two stage turbine?
It would be awesome to spray my stucco exterior and patio cover (maybe even reseal my redwood fence), and then turn around and finely spray some interior trim and built-ins I'm working on!!!!
Logged
Brice Burrell

Offline Offline

Location: Pittsburgh, PA, USA
Member Since: Mar 2007
Posts: 6473


Remodeling Contractor


WWW
« Reply #11 on: February 16, 2010, 06:33 PM »

Well, just was in the Newbury Park CA HmDpt and they have a display and two in boxes....

What was the price?
Logged

Check out my new blog, The Green and Dark Blue Blog.
morogue

Offline Offline

Location: UNITED STATES (US)
Member Since: Jul 2008
Posts: 27


« Reply #12 on: February 16, 2010, 09:05 PM »

Same as internet: $379. I know, all I could think was, uh you can get: a really good conversion gun, or a fairly decent hvlp, or a disposable/diy airless for that amount...
Logged
Steve-CO

Offline Offline

Location: Littleton, CO
Member Since: Oct 2007
Posts: 786


« Reply #13 on: February 20, 2010, 11:01 PM »

Anyone thinking of getting this, here's a coupon for $100 off, final price $279.
Logged
Tom Bellemare
Festool Dealer

Offline Offline

Location: Austin, Texas - USA
Member Since: Nov 2007
Posts: 4116


Festool demo's & personal service in Central Texas


WWW
« Reply #14 on: February 20, 2010, 11:21 PM »

Thanks, Steve!

A Franklin buys a lot...

Mine arrived a couple of days ago. It appears to be a solid piece of goods. I won't have a chance to use it for a little while but I thought it sounded like a good deal so I jumped on it. This makes the deal a lot sweeter.


Tom
Logged

Tom Bellemare
Customer Svc
Tool Home
www.tool-home.com
512-428-9140
rnt80

Online Online

Location: Gilbert, AZ
Member Since: Mar 2008
Posts: 776



WWW
« Reply #15 on: February 21, 2010, 10:18 AM »

I might have a crown job coming up that will be 1500+lf, this would ideal.  I've got a nice Asturo gun now with a pressure pot but I wouldn't want to use that for this job.  Being able to spray directly from a 5 gallon bucket would be perfect.  Let us know how the unit performs.
Logged

Russell Tribby
Gilbert AZ
www.agapewooddesign.com
darelv

Offline Offline

Member Since: Feb 2010
Posts: 1


« Reply #16 on: February 21, 2010, 02:38 PM »

Hey Tom Bellemare can you tell does the spray gun and hose connection has a SWIWEL? Did you try the sprayer? Is the spray pattern unified?
Thank you in advance for respond
Logged
Tom Bellemare
Festool Dealer

Offline Offline

Location: Austin, Texas - USA
Member Since: Nov 2007
Posts: 4116


Festool demo's & personal service in Central Texas


WWW
« Reply #17 on: February 21, 2010, 03:47 PM »

No, the gun doesn't swivel. In fact, there are two hoses - one for pressurized fluid and one for air, which is used if you are in HVLP mode.


Tom
Logged

Tom Bellemare
Customer Svc
Tool Home
www.tool-home.com
512-428-9140
John Stevens

Offline Offline

Location: Ardmore, PA
Member Since: Jan 2007
Posts: 751


Ardmore, PA


« Reply #18 on: February 21, 2010, 10:49 PM »

Is the HVLP part a gimmick?

Aren't HVLP systems around a grand?  I mean, ones that aren't a PITA to use or clean.

Is it possible that Milwaukee's machine could give comparable performance at 40%-50% the cost of a Fuji, for example?

Regards,

John
Logged

What this world needs is a good retreat.
--Captain Beefheart
Robert Robinson

Offline Offline

Location: Princeton, Indiana
Member Since: Nov 2007
Posts: 712


southern Indiana, U.S.A.


« Reply #19 on: February 22, 2010, 04:18 AM »

Anyone thinking of getting this, here's a coupon for $100 off, final price $279.

I couldn't get the coupon to work. It says Adobe file is damaged and cannot be repaired.
Logged

TS-55, FS-KS angle unit, 55 inch guide rail, Domino (pin style), 3 Domino systainer assortments(one sipo set),Multi-position Guide Stop 20, Domiplate , PSB-300, FOGtainer 4, CXS set
nico

Offline Offline

Location: belgium
Member Since: Apr 2008
Posts: 94


« Reply #20 on: February 22, 2010, 07:12 AM »

Does anyone know if they sell something similar in Europe ( Belgium) for that price?
Logged
Alex

Offline Offline

Location: The Netherlands
Member Since: Nov 2008
Posts: 3193



« Reply #21 on: February 22, 2010, 08:34 AM »

Does anyone know if they sell something similar in Europe ( Belgium) for that price?


I have never seen anything with this functionality at this price. I am really amazed they can market this at this price, having both the airless and HVLP functionality in one. Of course I don't know at what quality standard this thing is built. If it works it's extremely good value for the money.

The things that comes closest to this in Europe that I know about are Wagner's products. Wagner has a line of spray equipment that ranges from Pro to Semi-Pro to Hobbyist. Even their Semi-Pro line is a lot more expensive than this Milwaukee sprayer. Check out some of Wagner's Hobbyist and Semi-Pro lines at ToolProf. They also ship to Belgium but I'm sure Wagner is also sold in Belgium.
Logged
Steve-CO

Offline Offline

Location: Littleton, CO
Member Since: Oct 2007
Posts: 786


« Reply #22 on: February 22, 2010, 10:30 AM »

Anyone thinking of getting this, here's a coupon for $100 off, final price $279.

I couldn't get the coupon to work. It says Adobe file is damaged and cannot be repaired.


It's still working for me, maybe you need to upgrade the version of Adobe you're using.  Under the Help menu in Adobe, select Check For Updates.
Logged
Robert Robinson

Offline Offline

Location: Princeton, Indiana
Member Since: Nov 2007
Posts: 712


southern Indiana, U.S.A.


« Reply #23 on: February 22, 2010, 05:58 PM »

Well, it's working now. I didn't do anything, but click on it again. I tried 3 or 4 times last night, but got the same response. Thanks for posting that. I have the Wagner airless sprayer, but for that price, would love to own this one too.
Logged

TS-55, FS-KS angle unit, 55 inch guide rail, Domino (pin style), 3 Domino systainer assortments(one sipo set),Multi-position Guide Stop 20, Domiplate , PSB-300, FOGtainer 4, CXS set
morogue

Offline Offline

Location: UNITED STATES (US)
Member Since: Jul 2008
Posts: 27


« Reply #24 on: February 24, 2010, 04:36 PM »

I think we all would love to hear anything regarding this system in use, thanks.
Logged
Memphis Larry

Offline Offline

Member Since: Jul 2008
Posts: 62



WWW
« Reply #25 on: March 12, 2010, 11:47 AM »

Bump.

Still thinking about buying one of these sprayers.   Would like to use the $100 rebate good for the remainder of this month.

Any feedback from actual users?  Tom??
Logged

Domino, RO 150 FEQ, TS 75 EQ, MFT/3, LS 130 EQ, CT 33 E with Boom Arm and WCR-1000, HSK-SET Sanding Block Set, OF 1400, Kapex KS 120 EB with FastCap V2 Pro, MFK 700 EQ SET, Parallel Guide Set, CT Midi, Rotex RO 90 DX, Qwas Dogs & Qwas Rail Dogs, ETS 150/3, Granat Hand Sanding T-Loc Assortment, LR 32 Sys, SysLite, HL 850 E, Pocket Stickfix Hand Sanding, CXS Drill...
Charimon

Offline Offline

Location: Omaha NE
Member Since: Jun 2008
Posts: 652


Tool and Tile Junkie


« Reply #26 on: March 12, 2010, 07:05 PM »

Hey
I found out some DISAPPOINTING information on these....TTI Milwaukee's owner has pulled a Porter-Cable here The internal parts to this are all from Milwaukee's sister Ryobi  Sad   TTI rebadged  ryobi mechanics in Milwaukee red and black  ........ shame on them
 
Logged

"The existence of the flame thrower proves that at one time, somewhere, somebody said, " You Know, There's a group of people over there that I'd like to set on fire right now but they're too far away."
harry_

Offline Offline

Location: Middleton, NH
Member Since: Nov 2009
Posts: 1099



« Reply #27 on: March 13, 2010, 11:13 AM »

is there a problem with ryobi mechanics?

For the price point, they actually decent tools.



A Corolla is not a Lexus, but it can still cart you to the store Cheesy
Logged

Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).
Peter Halle
Global Moderator

Offline Offline

Location: Powhatan, Virginia USA
Member Since: Jul 2007
Posts: 7628


Captain Festool would drive one of these!


WWW
« Reply #28 on: March 13, 2010, 11:35 AM »

is there a problem with ryobi mechanics?

For the price point, they actually decent tools.



A Corolla is not a Lexus, but it can still cart you to the store Cheesy

Manufacturers of tools typically manufacture - or have manufactured - to a price point.  The Festool users out there are lucky because Festool focuses on quality, longevity, innovation, and not necessarily price.  I think the tools that we will see this year will put an exclamation point on that.  That is why they are comfortable enough to offer the warranties they do.

I think the issue at hand is when manufacturers have several quality lines and then use the reputation (goodwill) of one line whose history has been of better quality to sell a product that is really a rebadged lesser quality product.

I have many Ryobi tools from the 1980's when they first came out as competition to Makita.  There were lawsuits at that time regarding price dumping and also similarity of colors.  They were very innovative and they still are.  They do indeed serve a place in the tool chain. 

Peter

Logged

The tools in my truck were talking the other day.  The Dewalts, PC's, Boschs, Makitas were not happy.  They also were in the minority.  Their complaint:  They felt unused and unappreciated since the Festools moved in.  I guess the truth hurts.
WarnerConstCo.

Offline Offline

Location: Auburn, In usa
Member Since: Apr 2008
Posts: 3225



WWW
« Reply #29 on: March 13, 2010, 11:45 AM »

Peter- I have several older Ryobi's.

They were made in Japan and were really similar to the Makita's at the time.

I still have 2 grinders and a electric drill that are working like new.

Kind of a shame a company can start out like that and end up where they are now.
Logged

Pages: [1] 2  All   Go Up
  Print  
 
Jump to: