Author Topic: Nilfisk Vacuum Question  (Read 1692 times)

0 Members and 1 Guest are viewing this topic.

Offline ILT

  • Posts: 3
Nilfisk Vacuum Question
« on: August 03, 2018, 01:38 PM »
For those of you using a Nilfisk vacuum with your Festool "instruments", what is the inside diameter of the port on the vacuum body where the hose is attached?

I'm hoping the answer is about 58mm or 2-1/4".

I am considering the purchase either a Nilfisk model Aero 21 or the more powerful Attix 30.

Thank you in advance.

Jack

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline kevinculle

  • Posts: 216
Re: Nilfisk Vacuum Question
« Reply #1 on: August 03, 2018, 06:52 PM »
I have an Aero 21 and the receptacle in the vac accepts a standard 2 1/4" hose connection.

Offline ILT

  • Posts: 3
Re: Nilfisk Vacuum Question
« Reply #2 on: August 03, 2018, 08:34 PM »
Ooooh, great!! Exactly the answer I wanted to read.

Thanks very much.  [smile] [big grin]

Offline ProCarpenterRVA

  • Posts: 72
Re: Nilfisk Vacuum Question
« Reply #3 on: August 03, 2018, 10:06 PM »
I had to sit out the measurement part of the answer here. I can tell you that I have a CT26 and three Nilfisk Attix 30 /8 SE, and all the hoses are cross compatible.

Sent from my Pixel XL using Tapatalk


Offline ILT

  • Posts: 3
Re: Nilfisk Vacuum Question
« Reply #4 on: August 08, 2018, 01:22 AM »
Thank you guys for your much appreciated input. A Nilfisk Attix 33-01 IC has been ordered. My wife will like it too–her favorite color is blue.  [wink]

Offline aloysius

  • Posts: 278
Re: Nilfisk Vacuum Question
« Reply #5 on: August 08, 2018, 02:57 AM »
Immediately prior to the millenium Festo used to "badge engineer" & market Nilfisk Alto Wap vacs as their own.  These days they do the same with Kraenzle's range, a company they acquired a few years ago.

Development of new vacuums is a fairly expensive & technical business, presumably requiring fairly liberal R&D expenditure that is beyond the financial capabilities of most SMEs beyond the 3 or 4 true german vac manufacturers.

Your Festo hoses will still fit both old & new N/A/W vacs, just as many of their past, present & future accessories & ancillaries will likewise be cross-compatible with the Kraenzle/Festo range.
FOG-wit since '95:  Some say since birth...