Author Topic: Q for the Oneida / Quick-Clamp / Nordfab users  (Read 962 times)

0 Members and 1 Guest are viewing this topic.

Offline Picktool

  • Posts: 126
Q for the Oneida / Quick-Clamp / Nordfab users
« on: May 27, 2018, 05:31 PM »
I bought all my QC's from Oneida. The clamps say Nordfab.
Anyways, I have a few connections that have a small leak.
Nothing to be freaking over so I ran a band of tape over it
as a temp most probably long term fix. Hmmm...

Would a band of bicycle tube work? Say cut it about 1"w or less
and stretch it over the joining area then follow up w/ the clamp.
Why I ask is... what size tube would I be looking for?

This would have to stretch 4/5/6" tubes. Obviously the tighter
the better seal no? Then cut the excess tube after the clamp
is on for optional ocd issues. The ducting can sometimes be
a pita but when its done it looks neat.

So are there any cyclists out there that have a recommendation?
Thanks all
Well Dogey

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2007
Re: Q for the Oneida / Quick-Clamp / Nordfab users
« Reply #1 on: May 27, 2018, 08:10 PM »
I use self sealing silicone tape for this sort of thing, seals perfectly and can be cut off easily.  I buy it off Amazon...X-Treme Tape TPE-X36ZLB Silicone Rubber Self Fusing Tape, 1" x 36'

Offline Picktool

  • Posts: 126
Re: Q for the Oneida / Quick-Clamp / Nordfab users
« Reply #2 on: May 28, 2018, 07:58 AM »
... X-Treme Tape TPE-X36ZLB Silicone Rubber Self Fusing Tape, 1" x 36'

Cool... have it on order. Seems to have good reviews for other uses also.

Thanks RST !!
Well Dogey

Offline wwb119

  • Posts: 6
Re: Q for the Oneida / Quick-Clamp / Nordfab users
« Reply #3 on: June 16, 2018, 11:43 PM »
RST -   yes, thanks as well.  Tape is on order !