Author Topic: Staying Safe and Comfortable  (Read 1810 times)

0 Members and 1 Guest are viewing this topic.

Offline TealaG

  • Posts: 66
Staying Safe and Comfortable
« on: July 03, 2017, 11:21 AM »
Hi...sorry for the potentially misleading subject.   It's 100 degrees outside and my workshop is in an un-air conditioned garage.   Originally, I tried to do my wood working wearing tshirt and shorts.   The sawdust would impregnate my clothes!   I didn't know what to do, until I watched a Peter Parfitt video and noticed him wearing a labcoat.   Brilliant idea, I thought...

I bought this one: https://www.amazon.com/gp/product/B01N3YYM8D/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I had to alter the sleeves to make them tighter and shorter to prevent excess sleeve from dangling into a moving blade.   The coat "works", in that, my clothes stay relatively dust free (not perfect...but let's say 80-90% improvement).   However, in 100 degree weather, well, that sucker is hot.   You say "But weren't you hot in a t-shirt and shorts?"   Yeah...but, this is WORSE.

I finally (finally) found a dust mask with a bit more ventilation (though, it's still hot in there too).     Is there anything I can do to ventilate my coat so that it will still protect from dust but not be an oven inside?

PS...I am working on ventilation for the garage and looking into "reasonably priced" A/C options - but I need relief until I can get that problem fixed.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 3353
Re: Staying Safe and Comfortable
« Reply #1 on: July 03, 2017, 04:17 PM »
I hear you brother.  Let me know if you find a solution...

I just make sure to keep my hand tools and cast iron surfaces well-oiled and waxed in the summer to protect from all my sweat.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline Holmz

  • Posts: 3998

Offline Getmaverick

  • Posts: 81
Re: Staying Safe and Comfortable
« Reply #3 on: July 03, 2017, 06:36 PM »
I have the same problem, accept my shop is a steel building and 2500 sqft.
I have 2 large shop fans. One is pulling air in and the other is pushing it out. During the summer months I'm now in the shop by 6:00 am.

Offline Kevin C.

  • Posts: 95
Re: Staying Safe and Comfortable
« Reply #4 on: July 03, 2017, 10:49 PM »
Fire up your air compressor and stick the air chuck inside your belt. Viola! Air conditioned pants. Cool breeze! Yes, it sounds silly. No, it won't work if you are moving around the shop a whole lot. But here, in central Florida, it helps for a few minutes.

Offline Don T

  • Posts: 1704
  • Phoenix, Az
Re: Staying Safe and Comfortable
« Reply #5 on: July 03, 2017, 11:57 PM »
Have you tried a swamp cooler?  They work great until the humidity gets high.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS

Offline Trevin

  • Posts: 69
Re: Staying Safe and Comfortable
« Reply #6 on: July 04, 2017, 12:31 AM »
You could "Commando" under the lab coat!   [eek] ;D

Trevin
Festool: MFT3 (x2), OF1010, OF1400, LR32, Domino DF500, Domino XL DF700, Kapex KS120, TS-75, Carvex 420, CXS, C-18, Vecturo OS 400, DTS 400, Pro 5, Rotex 125, VAC-PMP, VAC-SYS-1, VAC-SYS-2, CT-26 (x2), CT-SYS, SYS Light DUO, SYS-ROCK
Other: Minmax FS41, Sawstop PCS (3HP, 52"), Laguna BX14, Jet 17" Drill Press, Rikon 70-220VSR Lathe, Incra LS Router Station, Laguna P/Flux 3 Dust Collector

Offline TealaG

  • Posts: 66
Re: Staying Safe and Comfortable
« Reply #7 on: July 04, 2017, 10:44 PM »
hmmmm...not sure how "safe" commando would be!

I'm now thinking of sewing a coat out of cotton so that maybe it'll breathe better.   Besides, after sweating buckets, I'll need to have several of them so that I can always have a non-stinky, non-sweaty one available!   My current coat, heavy and made with man made fibers isn't drying fast while I recover from the "sauna session"...so then I end up clammy, until that transforms into sweaty again.

Offline ben_r_

  • Posts: 797
Re: Staying Safe and Comfortable
« Reply #8 on: July 04, 2017, 11:07 PM »
Man you guys are troopers! Once it gets into the high 80's I call it quits for the day! I cant stand heat and hate fighting rust spots from sweat on my tools. Hoping to have a mini-split installed soon so I can keep it in the 70's while Im working.
If at first you don't succeed, redefine success!

Offline TealaG

  • Posts: 66
Re: Staying Safe and Comfortable
« Reply #9 on: July 05, 2017, 09:21 AM »
Hey...around here, if you can't work when it's over 90 degrees, you may only get woodworking done 1/2 the year!   I'm trying to tough it out so that I can get the workshop organized so that future small projects can be quick "in and out".   I spend too much time setting up, searching for stuff etc.  By end of week, I should be in much better shape so that the 20% of the stuff I use "all the time" is readily at hand. 

Nevertheless...a minisplit is definitely on my wish list...