Scott W.
 Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
 |
« on: April 04, 2008, 06:43 PM » |
|
Okay, Let's give this poll thing a try. Shop4tools.co.uk will ship them to me and I will forward them to you from PA (for cost of rule + ship). They need to know qty's of each size to give me a price and shipping charges. So let me know what you want & I'll report back on the price. Info on the product is hereScott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
 |
« Reply #1 on: April 05, 2008, 07:43 PM » |
|
In the previous thread, which spurred this terrific idea by Scott, I have posted some comparison notes and pictures showing the size difference between the models. I was going to include a shot with a Talmeter in hand but it is 01.43 AM my time and I am a bit slow so I am better off going to bed. See: http://festoolownersgroup.com/index.php?topic=2681.60 |
|
|
|
« Last Edit: April 05, 2008, 07:44 PM by pingvinlakrits »
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #2 on: April 09, 2008, 05:48 PM » |
|
Sadly, the tape pingvinlakrits likes is no longer available. I see that Shop4Tools has an Imperial scale version (10 foot) of the 3.1 meter tape. It's orange, the opposite of blue. It's also counter to the overall flow of this thread but maybe it should be an option too? |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #3 on: April 09, 2008, 05:56 PM » |
|
....... Imperial scale version (10 foot) of the 3.1 meter tape. It's orange, the opposite of blue. It's also counter to the overall flow of this thread but maybe it should be an option too?
No Problem, I have added the option to the poll Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #4 on: April 09, 2008, 06:09 PM » |
|
....... Imperial scale version (10 foot) of the 3.1 meter tape. It's orange, the opposite of blue. It's also counter to the overall flow of this thread but maybe it should be an option too?
No Problem, I have added the option to the poll Scott W. Looks like you only get to vote once so can't add another size. |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #5 on: April 09, 2008, 06:17 PM » |
|
Looks like you only get to vote once so can't add another size.
Mike, When I set it up it gave me an option to let people choose x amount of options. I selected 3 because there were 3 sizes. Edit will not let me change this option - it doesn't even show up  If you selected less than 3 the first time delete your vote & see if you can select it - if you want all 4 types we'll take care of it when I place the order. This is just to get a count for estimated shipping & to see if we can get a little discount. Scott |
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #6 on: April 09, 2008, 07:40 PM » |
|
Looks like you only get to vote once so can't add another size.
If you selected less than 3 the first time delete your vote & see if you can select it Scott How do I do that? By the way, I only want a blue and an orange. |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #7 on: April 09, 2008, 09:26 PM » |
|
How do I do that? By the way, I only want a blue and an orange.
Darned if i know Mike I'll just add your in to the quote Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
 |
« Reply #8 on: April 14, 2008, 10:30 AM » |
|
Okay Guys, We are ready to order!Here's the scoop, 1. They are willing to give us a 10% discount for a group order. 2. Shipping to PA works out to $2.50 per rule at the current qty. 3. There will be a wire transfer fee from my bank should be less than $1.00 per rule 4. The current exchange rate is 1.9845:1 you may as well say 2 to 1 I will front the $$ for the order and have them shipped to me. (you guys are good for it, Right?  ) I will ship them to you for cost of shipping cost depends on how many you ordered and where you are. Here's what I need: PM me with what you want and your address and contact info so I can place the exact order. Thanks, Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
vkumar
Offline
Location: Sunnyvale, California Member Since: Jan 2007
Posts: 221
Sunnyvale (near San Jose) California
|
|
« Reply #9 on: April 14, 2008, 12:51 PM » |
|
Okay Guys, We are ready to order!Here's the scoop, 1. They are willing to give us a 10% discount for a group order. 2. Shipping to PA works out to $2.50 per rule at the current qty. 3. There will be a wire transfer fee from my bank should be less than $1.00 per rule 4. The current exchange rate is 1.9845:1 you may as well say 2 to 1 I will front the $$ for the order and have them shipped to me. (you guys are good for it, Right? ) I will ship them to you for cost of shipping cost depends on how many you ordered and where you are. Here's what I need: PM me with what you want and your address and contact info so I can place the exact order. Thanks, Scott W. Scott, I wonder if you could summarize the costs of each rule in an easy to follow format. Thanks Vijay |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #10 on: April 14, 2008, 01:07 PM » |
|
Scott, I wonder if you could summarize the costs of each rule in an easy to follow format.
Thanks
Vijay
Vijay this should be pretty close: 2.1m - 9.0GBP = $18.00 - 1.80 (discount)+ 2.50 international freight + 1.00 wire fee = 19.70 excluding domestic freight 3.1m - 11.50GBP = $23.00 - 2.30 (discount)+ 2.50 international freight + 1.00 wire fee = 24.20 excluding domestic freight 6.1m -24.50GBP = $49.00 - 4.90 (discount)+ 2.50 international freight + 1.00 wire fee = 47.60 excluding domestic freight 10ft - 11.50 GBP = $23.00 - 2.30 (discount)+ 2.50 international freight + 1.00 wire fee = 24.20 excluding domestic freight Obviously if all those who used the pre-order poll do not order (or if more do) it will effect the freight and maybe the discount. Scott W. |
|
|
|
« Last Edit: April 14, 2008, 05:33 PM by Scott W. »
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #11 on: April 14, 2008, 04:34 PM » |
|
Scott, I wonder if you could summarize the costs of each rule in an easy to follow format.
Thanks
Vijay
Vijay this should be pretty close: 2.1m - 9.0GBP = $18.00 - 1.80 (discount)+ 2.50 international freight + 1.00 wire fee = 19.70 excluding domestic freight 3.1m - 11.50GBP = $23.00 - 2.30 (discount)+ 2.50 international freight + 1.00 wire fee = 22.20 excluding domestic freight 6.1m -24.50GBP = $49.00 - 4.90 (discount)+ 2.50 international freight + 1.00 wire fee = 47.60 excluding domestic freight 10ft - 11.50 GBP = $23.00 - 2.30 (discount)+ 2.50 international freight + 1.00 wire fee = 24.20 excluding domestic freight Obviously if all those who used the pre-order poll do not order (or if more do) it will effect the freight and maybe the discount. Scott W. Net cost of the 3.1 meter should be $24.20, same as the 120" tape. |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
 |
« Reply #12 on: April 14, 2008, 05:33 PM » |
|
woops...
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #13 on: April 14, 2008, 06:19 PM » |
|
For those of you who have ask about how to pay me, the answer is "I don't know yet"  First all I need is your order AND your contact info and shipping address.I have only heard from 5 out of 19 so far... Once everyone has "committed" I will send the order off & let you guys know how to pay. I would like to get them ordered quickly, as I will be out of the country from the 23 thru the end of the month and would like to get them on the way before I leave. Thanks Scott W. |
|
|
|
« Last Edit: April 14, 2008, 06:20 PM by Scott W. »
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #14 on: April 15, 2008, 10:17 AM » |
|
Still waiting on quite a few orders.....
If you want them PM me with your order and contact info.
Thanks,
Scott W.
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #15 on: April 15, 2008, 09:09 PM » |
|
Bump
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
|
« Reply #16 on: April 16, 2008, 12:44 AM » |
|
Help Scott out here, fellas.
Talmeters are good stuff and you should take this chance to get your hands on one.
|
|
|
|
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
|
« Reply #17 on: April 16, 2008, 11:25 AM » |
|
Has it arrived yet Nick?  |
|
|
|
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #18 on: April 16, 2008, 05:08 PM » |
|
Okay Guys,
If you Haven't PM'd me with your order NOW IS THE TIME
I'm still missing 6 voters.
I would like to get this order placed before I leave the country next week.
Thanks
Scott W.
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #19 on: April 17, 2008, 12:28 AM » |
|
Bump
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #20 on: April 21, 2008, 03:42 PM » |
|
I am leaving for Beijing in the morning and have not yet ordered the rules.
I decided to wait until I return to give the last six who said they wanted them but have not yet sent me a PM with their order to do so.
I would appreciate it if someone would bump this thread now and then while I am away in hopes that the remaining folks will PM me their order.
Thank you,
Scott W.
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #21 on: April 21, 2008, 04:32 PM » |
|
I am leaving for Beijing in the morning
Check out the restaurants in the Hou Hai area (the "back lake" area just north of Hou Hai Lake) north of Beihai Park, which is north of Tiananmen Square. Also just west of the Drum and Bell Towers. There is a fantastic Hunan restaurant there which specializes in the spicy cuisine of Mao's hometown. Have a great trip and thanks again for working out the tape deal. |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #22 on: April 21, 2008, 10:58 PM » |
|
I'll bump the thread while you are away.
Have a great trip!
Nickao
Thanks Nick Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #23 on: April 21, 2008, 11:07 PM » |
|
I am leaving for Beijing in the morning
Check out the restaurants in the Hou Hai area (the "back lake" area just north of Hou Hai Lake) north of Beihai Park, which is north of Tiananmen Square. Also just west of the Drum and Bell Towers. There is a fantastic Hunan restaurant there which specializes in the spicy cuisine of Mao's hometown. Have a great trip and thanks again for working out the tape deal. Thanks for the suggestion Michael, I am familiar with the black lake area. This will be my 22nd (I think) trip to China, I go at least twice a year, and the flight seems to get longer each time . I will only be in Beijing for one day then will be heading south to the trade fair in Guangzhou. Do you go for Business? Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #24 on: April 22, 2008, 12:05 AM » |
|
I am leaving for Beijing in the morning
Check out the restaurants in the Hou Hai area (the "back lake" area just north of Hou Hai Lake) north of Beihai Park, which is north of Tiananmen Square. Also just west of the Drum and Bell Towers. There is a fantastic Hunan restaurant there which specializes in the spicy cuisine of Mao's hometown. Have a great trip and thanks again for working out the tape deal. Thanks for the suggestion Michael, I am familiar with the black lake area. This will be my 22nd (I think) trip to China, I go at least twice a year, and the flight seems to get longer each time . I will only be in Beijing for one day then will be heading south to the trade fair in Guangzhou. Do you go for Business? Scott W. I've only been to China four times and enjoyed each trip, but 22 is a lot! That's starting to sound like work. It's not exactly business for me but so far we've been able to deduct the expenses. My wife is working on a documentary on Chinese kite makers, and I help. One of the exceptional kites that got me interested is this wind turbine actuated animated mantis,  This kite is hand made of bamboo and silk. The "teeth" strapped to the bamboo wheels to create gears are simply copper wire bent with needle nose pliers. The axle is a bit of paper clip wire. You can't tell from these two pictures but he is also a superb painter. There is more at the website. |
|
|
|
|
Logged
|
|
|
|
vkumar
Offline
Location: Sunnyvale, California Member Since: Jan 2007
Posts: 221
Sunnyvale (near San Jose) California
|
|
« Reply #25 on: April 22, 2008, 05:15 PM » |
|
A bump.
|
|
|
|
|
Logged
|
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #26 on: April 25, 2008, 09:17 AM » |
|
I am leaving for Beijing in the morning and have not yet ordered the rules.
I decided to wait until I return to give the last six who said they wanted them but have not yet sent me a PM with their order to do so.
I would appreciate it if someone would bump this thread now and then while I am away in hopes that the remaining folks will PM me their order.
Thank you,
Scott W.
Bumped. |
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #27 on: May 03, 2008, 11:41 AM » |
|
Hi all, I made it back from the East last night and will be placing the order on Monday (after the jet lag wears off  ) We are still missing 5 of the original people who participated in the purchasing poll but I believe we have waited long enough for everyone to get in. I Will place the order and wire the money on Monday morning so if you want in just PM me with your order and contact/shipping info. After I know the exact final costs I'll let all who ordered know how to send payment. Thanks to those who bumped the thread during my absence. Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
|
« Reply #28 on: May 19, 2008, 04:19 AM » |
|
If there is someone missing out on the offer I might be able to scrounge up a few Talmeters in addition. Scott is making you guys a great service on a good product - I foresee a conversion to the metric side of things. Metric is so easy that once you have had your break in period you might not want to go back.. |
|
|
|
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #29 on: May 19, 2008, 06:30 PM » |
|
THEIR HERE!!!!
The rules arrived today. I will get them sent out over the next day or two to those who ordered them.
Scott W.
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #30 on: May 19, 2008, 07:37 PM » |
|
THEIR HERE!!!!
The rules arrived today. I will get them sent out over the next day or two to those who ordered them.
Scott W.
You didn't even tell us how to pay for them yet! |
|
|
|
|
Logged
|
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #31 on: May 19, 2008, 07:40 PM » |
|
THEIR HERE!!!!
The rules arrived today. I will get them sent out over the next day or two to those who ordered them.
Scott W.
You didn't even tell us how to pay for them yet! Not to worry Mike, I'll get to it Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
patrick anderson
Offline
Location: muswell hill, now hagerstown, md Member Since: Sep 2007
Posts: 153
|
|
« Reply #32 on: May 20, 2008, 10:54 AM » |
|
Bugger....I missed out on this. I'll have to see if I can get mate back home to send em over.
|
|
|
|
|
Logged
|
|
|
|
Dan Lyke
Offline
Location: Petaluma, CA Member Since: Jan 2007
Posts: 324
|
|
« Reply #33 on: May 20, 2008, 10:56 AM » |
|
Awesome! Eagerly awaiting payment instruction.
|
|
|
|
|
Logged
|
Accomplished computer geek, novice woodworker, road cyclist, in Sonoma county, northern California.
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #34 on: May 20, 2008, 11:04 AM » |
|
Bugger....I missed out on this. I'll have to see if I can get mate back home to send em over.
neoshed / all, I purchased a few "extras" to fulfill my original pre-order with them. Once I get these all packaged up for those who ordered I'll let you all know what is available. Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
patrick anderson
Offline
Location: muswell hill, now hagerstown, md Member Since: Sep 2007
Posts: 153
|
|
« Reply #35 on: May 20, 2008, 12:02 PM » |
|
Result..... Cheers Nick and Scott.
|
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #36 on: May 22, 2008, 03:35 PM » |
|
If you ordered a Rule, you should have received an email from me. If I did not have your email, You should have received a PM asking for it If you have not received either please PM me (include your email address) Thanks, Scott W.
|
|
|
|
|
Logged
|
PA, USA
|
|
|
patrick anderson
Offline
Location: muswell hill, now hagerstown, md Member Since: Sep 2007
Posts: 153
|
|
« Reply #37 on: May 22, 2008, 05:06 PM » |
|
Let me know once everyone has theirs which ones you have left over mate.
|
|
|
|
|
Logged
|
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #38 on: May 22, 2008, 05:13 PM » |
|
Let me know once everyone has theirs which ones you have left over mate.
I will post here what is available when they have all been shipped. Thanks, Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #39 on: May 22, 2008, 08:34 PM » |
|
If you ordered a Rule, you should have received an email from me. If I did not have your email, You should have received a PM asking for it If you have not received either please PM me (include your email address) Thanks, Scott W. bump |
|
|
|
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #40 on: May 23, 2008, 12:44 PM » |
|
I Mailed ALL of The Talmeter Rules Today!All went Priority Mail except our poor Canadian friend which went First Class mail. If you ordered you should have received an email with payment instructions. If you have sent payment, Thank You. If you have not. Please do so I have left: 1 - 3.1 meter 2 1 - 6 meter If you would like one or all of them please send me a PM. - First Come/First Serve Thank You Scott W. If you ordered a Rule, you should have received an email from me. If I did not have your email, You should have received a PM asking for it If you have not received either please PM me (include your email address) Thanks, Scott W.
|
|
|
|
« Last Edit: May 23, 2008, 04:41 PM by Scott W. »
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #41 on: May 23, 2008, 04:43 PM » |
|
I Mailed ALL of The Talmeter Rules Today!All went Priority Mail except our poor Canadian friend which went First Class mail. If you ordered you should have received an email with payment instructions. If you have sent payment, Thank You. If you have not. Please do so [ i]Now only 1 - 6 meter and 1 - 3 meter left[/i]
I have left:
1 - 3.1 meter
2 1 - 6 meter
If you would like one or all of them please send me a PM. - First Come/First Serve
Thank You Scott W. If you ordered a Rule, you should have received an email from me. If I did not have your email, You should have received a PM asking for it If you have not received either please PM me (include your email address) Thanks, Scott W.
|
|
|
|
« Last Edit: May 23, 2008, 08:32 PM by Scott W. »
|
Logged
|
PA, USA
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #42 on: May 23, 2008, 06:33 PM » |
|
All Talmter rules are now gone
Scott W
|
|
|
|
|
Logged
|
PA, USA
|
|
|
Dan Clermont
Festool Dealer
Offline
Location: Vancouver / Burnaby, British Columbia, Canada Member Since: Jan 2007
Posts: 973
Canadian Festool Dealer
|
|
« Reply #43 on: May 23, 2008, 08:22 PM » |
|
I Mailed ALL of The Talmeter Rules Today!All went Priority Mail except our poor Canadian friend which went First Class mail. Thanks Scott!!! I really appreciate you organizing this group buy For this Canadian it'll round out my conversion to metric cosidering I've been drivng cars in Kilometers for years Dan Clermont |
|
|
|
« Last Edit: May 23, 2008, 09:07 PM by Dan Clermont »
|
Logged
|
Canadian Festool Dealer and User!!!
778-558-7745
|
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
|
« Reply #44 on: May 24, 2008, 05:42 AM » |
|
All Talmeters are gone, but if there are any Canuck people wanting one or two I might be able to bring a few on my trip to Edmonton in July/August. I'll be spending a few weeks with some canadian friends and I h ave one or two spares at home (Blue 3.1M and a Green 2.1M) and I could get hold of one more Blue I think. Henrik |
|
|
|
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
patrick anderson
Offline
Location: muswell hill, now hagerstown, md Member Since: Sep 2007
Posts: 153
|
|
« Reply #45 on: May 24, 2008, 12:38 PM » |
|
Gah.....I missed them again.  |
|
|
|
|
Logged
|
|
|
|
Henrik R / Pingvinlakrits
Offline
Location: Sweden Member Since: Oct 2007
Posts: 268
|
|
« Reply #46 on: May 24, 2008, 03:09 PM » |
|
Patrick, where are you located?
|
|
|
|
|
Logged
|
Festools: TS55 circ saw, Rotex 90 Sander, RTS 400 sander, (other sanders replaced by MIRKA Ceros), OF1010 router, Domino DF500. CMS table, CS50, CS70, TS75, EHL65 + base unit. CTL22, CTL Mini Vac (crap I tell ya), CXS, T15Li, C15Li. Rails, Sys- and Sortainers galore
|
|
|
patrick anderson
Offline
Location: muswell hill, now hagerstown, md Member Since: Sep 2007
Posts: 153
|
|
« Reply #47 on: May 24, 2008, 03:31 PM » |
|
I'm in Maryland USA. I might see if I can order one from back home (England) and get it shipped over here as a last resort.
|
|
|
|
|
Logged
|
|
|
|
Dan Lyke
Offline
Location: Petaluma, CA Member Since: Jan 2007
Posts: 324
|
|
« Reply #48 on: May 27, 2008, 08:04 PM » |
|
Thanks, Scott!
I just got my Talmeters, and the thinking that's gone into making these subtly much more than just a tape measure is really cool! I'm very happy to have added these to my toolbox. You rock!
|
|
|
|
|
Logged
|
Accomplished computer geek, novice woodworker, road cyclist, in Sonoma county, northern California.
|
|
|
polarsea1
Offline
Location: Oregon, USA Member Since: Apr 2007
Posts: 128
|
|
« Reply #49 on: May 28, 2008, 12:04 AM » |
|
Scott, Mine arrived today - thanks!
Bill
|
|
|
|
|
Logged
|
|
|
|
Dan Clermont
Festool Dealer
Offline
Location: Vancouver / Burnaby, British Columbia, Canada Member Since: Jan 2007
Posts: 973
Canadian Festool Dealer
|
|
« Reply #50 on: May 28, 2008, 12:09 AM » |
|
The guys at Custom's Canada are playing with mine  Thanks for organizing this group buy Scott you did a terrific job! Cheers Dan Clermont |
|
|
|
|
Logged
|
Canadian Festool Dealer and User!!!
778-558-7745
|
|
|
vkumar
Offline
Location: Sunnyvale, California Member Since: Jan 2007
Posts: 221
Sunnyvale (near San Jose) California
|
|
« Reply #51 on: May 28, 2008, 02:56 PM » |
|
Scott,
Thank you for everything. Mine arrived yesterday.
Vijay
ps. Now I have to figure out how this is better than a metric Starrett
|
|
|
|
|
Logged
|
|
|
|
vkumar
Offline
Location: Sunnyvale, California Member Since: Jan 2007
Posts: 221
Sunnyvale (near San Jose) California
|
|
« Reply #52 on: May 28, 2008, 03:54 PM » |
|
Maybe not better, but different. And some unique features.
Nickao
Ok Nickao. I am up for some education. Please elaborate the different ways it can be used? I got the fact that it has unique inside measurement capability. Also diameter. Anything else I am missing? (I have the 3m tape). I dont like the fact that it has mm graduations only on the bottom (due to the fact that the diameter graduations fill the top), but I guess that diameter is important to some people. Vijay |
|
|
|
|
Logged
|
|
|
|
vkumar
Offline
Location: Sunnyvale, California Member Since: Jan 2007
Posts: 221
Sunnyvale (near San Jose) California
|
|
« Reply #53 on: May 29, 2008, 12:54 AM » |
|
I have the 3 m tape and it is in a blue case, the tape is white
Vijay
|
|
|
|
|
Logged
|
|
|
|
Dave Rudy
Offline
Location: Colorado Member Since: Jan 2007
Posts: 752
Coloroda Front Range, in the lee of Pikes Peak
|
|
« Reply #54 on: May 30, 2008, 12:35 AM » |
|
Thanks again Scott. Got my (2) fine.
|
|
|
|
|
Logged
|
|
|
|
Dan Clermont
Festool Dealer
Offline
Location: Vancouver / Burnaby, British Columbia, Canada Member Since: Jan 2007
Posts: 973
Canadian Festool Dealer
|
|
« Reply #55 on: June 02, 2008, 03:19 PM » |
|
Mine arrived early this morning. Luckily my wife was up and getting the kids ready for school  Thanks Scott Dan Clermont |
|
|
|
|
Logged
|
Canadian Festool Dealer and User!!!
778-558-7745
|
|
|
Scott W.
Offline
Location: PA, USA Member Since: Nov 2007
Posts: 333
|
|
« Reply #56 on: June 03, 2008, 12:05 AM » |
|
Mine arrived early this morning. Luckily my wife was up and getting the kids ready for school Thanks Scott Dan Clermont Well, that should do it, as far as I can tell everyone got their order You are all quite welcome, It was my pleasure to do it. I would say that this thread could now be officially closed Now, what did I do with those checks? Scott W. |
|
|
|
|
Logged
|
PA, USA
|
|
|
Michael Kellough
Offline
Location: UNITED STATES (US) Member Since: Jan 2007
Posts: 1905
Southern New York
|
|
« Reply #57 on: June 03, 2008, 08:19 AM » |
|
Mine arrived early this morning. Luckily my wife was up and getting the kids ready for school Thanks Scott Dan Clermont Well, that should do it, as far as I can tell everyone got their order You are all quite welcome, It was my pleasure to do it. I would say that this thread could now be officially closed Now, what did I do with those checks? Scott W. Thanks again Scott. Just in case your memory is as bad as mine, in the end I opted to pay via Paypal so that is one less check to locate. |
|
|
|
|
Logged
|
|
|
|
|
Poll
