Author Topic: What gauge nail guns do you recommend for finish carpentry?  (Read 2772 times)

0 Members and 1 Guest are viewing this topic.

Offline ear3

  • Posts: 3402
Re: What gauge nail guns do you recommend for finish carpentry?
« Reply #30 on: November 24, 2017, 02:25 PM »
I recently converted my guns over the cordless, and have been very happy so far, though would have been nice to do it all on a single battery platform.  15 gauge Milwaukee, 16 and 18 gauge Dewalts, the 23 gauge Makita pinner.  If you're looking into the Makita, bear in mind that they just recently released a second generation -- I learned this a couple of days after I bought the first gen., so I had enough time to return for the newer model.  The newer model has less of an issue sinking the longest pins into hardwood, whereas the older one struggled.

Going cordless has made a huge difference, even when I'm just working around the shop, since I don't keep my pancake compressor loaded with air when not in use.  I can just grab a gun for a few quick hits while jig making or something that only requires a couple of nails, without having to wait (or suffer the ear abuse) while the compressor fills.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline BJM9818

  • Posts: 160
Re: What gauge nail guns do you recommend for finish carpentry?
« Reply #31 on: November 26, 2017, 07:29 PM »
What ever you choose, please don't do this.

(Stoled the picture from a FB group I'm a member of)

Tom

Who let you on my jobsite?   [big grin]

Last remodel I installed the 1/4 round floor trim with my Grex 23gauge. 4000ft2 house. The painter had never seen 23 Gauge nail holes before.  He was extremely happy.

Offline 1toolshort

  • Posts: 61
    • Big Bob's Carpentry
Re: What gauge nail guns do you recommend for finish carpentry?
« Reply #32 on: November 27, 2017, 08:41 AM »
The smallest one that will do the trick, (already posted).  I used to use 15 all the time.  Then I got a 16 Paslode.  It gets used the most.  Also an 18, 21 and 23.  Door jambs, 15; casing 16; door stop 18; trim, 18 and 21.  cross nail on trim 23 or 21, depending on the material.  Just some ideas.  Good luck.
« Last Edit: November 27, 2017, 08:50 AM by 1toolshort »
ts-55 track saw; Rotex 125; mini vac; multi function table 3; cordless drill; domino,orbital sander 400; DWC-18

Offline demographic

  • Posts: 322
Re: What gauge nail guns do you recommend for finish carpentry?
« Reply #33 on: December 08, 2017, 01:43 AM »
In the UK we pretty much only use two sizes of nail gun unless we are workshop joiners.
Framing nailers (like the Paslodes and so on) and 16 gauge finish nailers.
If you work on sites where the main contractor supplies the brads then I would always buy the straight version as they hardly ever supply the angled brads. That mightbe different in the US.