Author Topic: Full Overlay Hinges..overlay.  (Read 2179 times)

0 Members and 1 Guest are viewing this topic.

Offline KUMA

  • Posts: 19
Full Overlay Hinges..overlay.
« on: January 23, 2018, 01:09 PM »
Hey all...questions for some of the euro hinge experts out there.

I have a GRASS hinge jig where the boring distance is 4mm with a 35mm bore.

I am going to get some GRASS TIOMOS hinges and I'm using 18mm doors. I plan on having a full overlay. ie an 18mm overlay. None of my cabinets hit walls hence I want the full overlay.

There are obviously various heights for the MOUNTING PLATE which would dictate the overlay size, the hinge I'm looking at has the table below. for example.



Now the Q I have is this....given the bore distance, cup distance in this table, of 4 there are no direct options to get to the 18mm overlay.

Is it possible here to say select a 2mm MOUNTING PLACE to get a 17mm overlay and then just adjust the hinge slightly once attached to get the movement over the extra 1mm. Since I am ripping the doors to my own custom size presumably this would work?

Alternatively I could get a 0m MOUNTING plate and a 3mm cup distance would get me the 18mm overlay....since I have a 4mm cup distance I would just need to move the other way by 1mm here to get the desired 18mm overlay. Obviously I would need to move all hinges on each door to keep straight.

Are my assumptions here right? Sorry this is my first time installing the cabinet doors and it's just for my own house.

Cheers all.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline KUMA

  • Posts: 19
Re: Full Overlay Hinges..overlay.
« Reply #1 on: January 23, 2018, 04:10 PM »
I think I’ve answered this question myself...I’ll fefinitely opt for the 2mm mounting plate to get a 17mm reveal. I can then adjust +/- 2 mm to create a 19mm overlay or 15mm overlay.


Offline waho6o9

  • Posts: 1347
    • Garage Door Handyman.com
Re: Full Overlay Hinges..overlay.
« Reply #2 on: January 23, 2018, 04:20 PM »
Practice on scrap.
274402-0

The Kreg jig is effective for limited production runs.
274404-1