Author Topic: Drawings for a mitter station  (Read 3842 times)

0 Members and 1 Guest are viewing this topic.

Offline bmw6cillinder

  • Posts: 3
  • nothing is impossible!
Drawings for a mitter station
« on: December 23, 2016, 09:31 AM »
Hi,

First of all , sorry for my bad english i am better in writhing dutch
i want myself to build a mitter station for my Festool tools and a kapex witch i want to get myself next year.
Is there some one around here who has a drawing with measurements to build one?

with kind regards

Offline Gregor

  • Posts: 254
Re: Drawings for a mitter station
« Reply #1 on: December 23, 2016, 01:20 PM »
The most interesting part is that the table of the Kapex is exactly the same height as a SYS-1 when both are put on the ground. Also the UG-Wings will be flat with the Kapex table when both are directly on even ground.

http://festoolownersgroup.com/festool-tools-accessories/kapex-dimensions/

Offline bmw6cillinder

  • Posts: 3
  • nothing is impossible!
Re: Drawings for a mitter station
« Reply #2 on: December 23, 2016, 02:31 PM »
I found a drawing with the measurements of the kapex

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3536
    • New Brit Workshop on YouTube
Re: Drawings for a mitter station
« Reply #3 on: December 24, 2016, 07:04 AM »
Hi @bmw6cillinder

If you send me your email address by private message I will send you the plans for my Kapex mitre station free of charge.

Als u mij uw e-mailadres sturen door privé-bericht zal ik u de plannen te sturen voor mijn Kapex verstek station gratis



Peter

Offline bmw6cillinder

  • Posts: 3
  • nothing is impossible!
Re: Drawings for a mitter station
« Reply #4 on: December 24, 2016, 04:27 PM »
Hi peter

thanks for your offer but i am looking more for something that have space for my systainers as well

« Last Edit: December 24, 2016, 04:30 PM by bmw6cillinder »

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 3536
    • New Brit Workshop on YouTube
Re: Drawings for a mitter station
« Reply #5 on: December 24, 2016, 04:55 PM »
Hi @bmw6cillinder

A good idea to get the systainers tucked away.  Good luck.

Peter

Offline them700project

  • Posts: 63
Re: Drawings for a mitter station
« Reply #6 on: February 15, 2017, 11:29 AM »
I dont really know what I was thinking but i made this for the kapex with a ton of storage. The Garage floor is off so base trim looks aweful