Author Topic: New workshop build  (Read 36552 times)

0 Members and 1 Guest are viewing this topic.

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #120 on: August 12, 2017, 10:12 PM »
I also made this out of aluminum to add the second dust port for the hammer band saw.
It is a aluminum tube with tapper hole inside welded to a 3/8 plate and 6 small magnets at the face to keep it on the side of the machine safely.





The dust nozzle was made out of 2.5 x 6 inches round stock 6061 and is fully adjustable. The height of the nozzle can be change from 5" to 20" by moving the stainless steel plates and adjustable handles. It also gets connected to 27mm hose inside and 36mm outside. Here the pics






Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #121 on: August 12, 2017, 10:32 PM »
How about test drive. [big grin]
Here is 35mm hole in 35mm or maybe 40 material without dust collector.



and with 27mm dust collector attached. Scary nice and very satisfied.




Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #122 on: August 12, 2017, 10:41 PM »
Now back to woodworking. [thumbs up]
Got some poplar and soft maple. Making the mobile clamp storage.


Offline Poindexter

  • Posts: 141
Re: New workshop build
« Reply #123 on: August 13, 2017, 08:20 AM »
I'm still enjoying this thread.

Offline Bob D.

  • Posts: 503
Re: New workshop build
« Reply #124 on: August 13, 2017, 08:40 AM »
Beautiful setup and nice to have all the additional support and also to be able to utilize it with adjacent tools like your CMS.

Question about your drill press.

It looks like you can raise/lower the height of the head on the column as well as the table like most drill presses.
-----
It's a table saw, do you know where your fingers are?

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #125 on: August 13, 2017, 10:02 AM »
I'm still enjoying this thread.
Thanks and I am glad that you like the thread.

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #126 on: August 13, 2017, 10:11 AM »
Beautiful setup and nice to have all the additional support and also to be able to utilize it with adjacent tools like your CMS.

Question about your drill press.

It looks like you can raise/lower the height of the head on the column as well as the table like most drill presses.
Thanks for the comment and yes you can raise/lower both the head and the table and they both turn 360 degree around the column.

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #127 on: August 13, 2017, 10:26 AM »
Milling dawn the lumber for mobile clamp rack.


Offline HarveyWildes

  • Posts: 499
Re: New workshop build
« Reply #128 on: August 13, 2017, 10:34 AM »
Some really nice ideas for dust collection.  Looking forward to the clamp rack.

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #129 on: August 13, 2017, 12:30 PM »
Some really nice ideas for dust collection.  Looking forward to the clamp rack.
Thanks, I have to paint it as well, so I think it will be done in two weeks.

Offline kelauben

  • Posts: 153
Re: New workshop build
« Reply #130 on: August 14, 2017, 04:29 PM »
I'm looking forward to these updates more than GoT episodes!   [tongue]

Where do I look to order the MegaWall slats?

Thanks.

Karl

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #131 on: Today at 12:47 AM »
I'm looking forward to these updates more than GoT episodes!   [tongue]

Where do I look to order the MegaWall slats?

Thanks.

Karl
I thought I did post it here before but here is.
http://www.megawall.com/

Offline HAXIT

  • Posts: 132
Re: New workshop build
« Reply #132 on: Today at 12:55 AM »
Boards are made and I will start put them together.