Author Topic: Sys-bicycle-mft  (Read 5342 times)

0 Members and 1 Guest are viewing this topic.

Offline Beemers

  • Posts: 3
Sys-bicycle-mft
« on: March 09, 2016, 02:05 AM »
Here in Amsterdam (The Netherlands) is getting around by bike much faster and cheaper than by car. So I came up with this: combination of a mft lp-800 plate and some t-tracks.

Maby usefull idea for others who work in congested cities.

Cheers

Beemers

Offline Kev

  • Posts: 7652
Re: Sys-bicycle-mft
« Reply #1 on: March 09, 2016, 06:31 AM »
I'm a little disappointed that the front wheel doesn't convert to a saw blade that rises up through the table [eek] [big grin]

Sydney hills would see you needing pedelec!!

Great idea. Did you waterproof the MDF?

@Beemers

Offline neeleman

  • Posts: 1230
Re: Sys-bicycle-mft
« Reply #2 on: March 09, 2016, 06:53 AM »
Looks nice although I'm not sure the systainers will stay in place when turning corners or riding over bumps.
The wooden side plates will not prevent the systainer from sliding, especially on the corners.
Or maybe they are somehow attached to the MFT plate?

Maybe you can use a few of these Tanos SYS-Connectors (#80600318)?

Festoolian since 1998.
FESTOOL:
RTSC400Li | CTL MIDI I | SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Beemers

  • Posts: 3
Re: Sys-bicycle-mft
« Reply #3 on: March 09, 2016, 03:13 PM »
I'm a little disappointed that the front wheel doesn't convert to a saw blade that rises up through the table [eek] [big grin]

Sydney hills would see you needing pedelec!!

Great idea. Did you waterproof the MDF?

@Beemers


Good idea Kev. And power the saw by pedaling

I didn't waterproof it because it's detachable, I only use when I need al lot of Systainers or a need a baby mft. A lot of times I just use the standard frontrack.

Offline Beemers

  • Posts: 3
Re: Sys-bicycle-mft
« Reply #4 on: March 09, 2016, 03:21 PM »
Looks nice although I'm not sure the systainers will stay in place when turning corners or riding over bumps.
The wooden side plates will not prevent the systainer from sliding, especially on the corners.
Or maybe they are somehow attached to the MFT plate?

Maybe you can use a few of these Tanos SYS-Connectors (#80600318)?




Yeah, I thought about those sys connectors, but I wanted a flush table top for cutting etc.

It turned out to be very stable, really, even in corners. I will stack up more Systainers next week to test it to the max. Plus  I can always secure it with a strap if needed

Ill keep you posted

Offline ear3

  • Posts: 3781
Re: Sys-bicycle-mft
« Reply #5 on: March 10, 2016, 01:21 AM »
Bravo.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline Kev

  • Posts: 7652
Re: Sys-bicycle-mft
« Reply #6 on: March 10, 2016, 03:04 AM »
I think we have part of the formula for an interesting triathlon event here .. bike leg sorted, the 1000m track saw cut sorts out the run. No sure what power tools I'd consider in the swim leg [scared] [eek]

Offline Charlie Mac

  • Posts: 365
Re: Sys-bicycle-mft
« Reply #7 on: March 13, 2016, 08:08 PM »
That's such a cool bike. It looks like it was designed for cargo.

Offline Untidy Shop

  • Posts: 2723
Re: Sys-bicycle-mft
« Reply #8 on: March 13, 2016, 08:18 PM »
I think we have part of the formula for an interesting triathlon event here .. bike leg sorted, the 1000m track saw cut sorts out the run. Not sure what power tools I'd consider in the swim leg [scared] [eek]

@Kev, obviously a C15/18. See around 2 mins in the video.

If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Kev

  • Posts: 7652
Re: Sys-bicycle-mft
« Reply #9 on: March 13, 2016, 10:08 PM »
That's such a cool bike. It looks like it was designed for cargo.

They are ... and very popular with bicycle couriers in Sydney!!

@Charlie Mac