Author Topic: What about a show your toolbox thread?  (Read 24588 times)

0 Members and 1 Guest are viewing this topic.

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
What about a show your toolbox thread?
« on: June 26, 2016, 11:48 PM »
Hi!

With all the shop tour videos and pictures floating around I found it quite surprising we don't have a toolbox(es) thread.

Please share you toolboxes, tool cabinets, tool walls ... whatever you use to store your tools.

I'll start - with my still evolving Snap-On KRA 4107 FPC toolbox. Pictures are from Mai - not 100% accurate anymore but they give an impression. If a tray seems empty, it is because I keep the contents either with a tool in a Systainer/L-Boxx or in a SYS-TB because I'm still building stuff. But the plan is at one point to have it all together. Maybe except for the 3/8" impact sockets, they have a great place in my impacts Systainer...  [scared] [scared]  [eek] [eek]  [big grin] [big grin] [big grin]

So please, please share!

Kind regards,
Oliver



























EDIT 28/06/2016 added pictures of Systainers and L-Boxxes. To reflect on the whole pedantic in me ;)

Stack of Systainers - and my tool "go bag".


Stack of Systainers - another variant.


Festool Sys-TB-2 always handy.


View inside Snap-On CT761EU Systainer


View inside Festool CXS 2.6 Ah - Set Systainer


View inside Festool DTS 400 EQ Plus Systainer


View inside Festool Abrasives Systainer


Stack of L-Boxxes (SOLD)


View inside measuring, detecting, laser and electric safety L-Boxx (L-BOXX SOLD)


View inside GSA and GOP L-Boxx (SOLD)


View inside GSA and GOP accessories i-Boxx (SOLD)


View inside GSR L-Boxx


View inside accessories i-Boxx 1 (SOLD)


View inside accessories i-Boxx 2 (SOLD)


View inside accessories i-Boxx 3 (SOLD)


View inside GST L-Boxx (SOLD)


View inside GBH L-Boxx


View inside Fischer L-Boxx (SOLD)


View inside GWS L-Boxx (SOLD)
« Last Edit: March 18, 2017, 03:42 PM by six-point socket II »

Online Peter_C

  • Posts: 464
Re: What about a show your toolbox thread?
« Reply #1 on: June 27, 2016, 01:06 AM »
You would laugh at me if I posted pictures of the draws of my tool boxes. Messy and overfilled, but I know where everything is. Someday I will buy a couple more KRL's and better organize. Many of my automotive tools are in bins or worse cardboard boxes. Moved my OTC ball joint press today and had to re-tape the bottom of the box. Sheesh, I am so not cool.

For now I can offer this awesome Snap-on bucket tool holder (Notice the nice handle padding) that fills up and empties routinely. It is always kinda dirty, but my hand tool bag is worse having been to a few too many junk yards and brought the grease back on it. Ewww... I have nothing shiny and new, as all my stuff is old, worn, and ugly.


Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #2 on: June 27, 2016, 01:13 AM »
Hi!

Thanks for sharing that awesome bucket, sadly stuff like that hardly makes overseas. As far as I know that never was a catalog item, but a promotion item, am I right?

Believe me, I'm never going to laugh about well used tools or well filled toolboxes. You could as well laugh about me for being so pedantic with cleaning tools thoroughly after each use, keeping the trays and organizing everything...  [smile]

So please, share a picture or two when you feel like it at some point :)

Kind regards,
Oliver

Offline Paul G

  • Posts: 1914
Re: What about a show your toolbox thread?
« Reply #3 on: June 27, 2016, 01:24 AM »
@Peter_C I like that handle wrap, my bucket (or my fingers) is in desperate need of a handle upgrade. I keep saying I'll get a Veto when this bucket dies but it keeps going even stuffed as it is

246734-0
246736-1
« Last Edit: June 27, 2016, 01:39 AM by Paul G »
+1

Offline Paul G

  • Posts: 1914
Re: What about a show your toolbox thread?
« Reply #4 on: June 27, 2016, 01:43 AM »
Oliver, if my wife saw your toolbox I'm toast
+1

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #5 on: June 27, 2016, 01:51 AM »
Oliver, if my wife saw your toolbox I'm toast

LOL, @Paul G  ;) Now, if your wife would happen to be an immigration lawyer, and you'd be ok with it - we could make a deal that would make everyone happy: You're not going to be toast, your wife will be enchanted about how organized your toolbox(es) is/are, I can make NYC my new place of permanent residence after a short vacation in NorCal... Sounds good?  [big grin] [big grin] [big grin] [big grin] [big grin] [big grin]

Kind regards,
Oliver
« Last Edit: June 27, 2016, 01:54 AM by six-point socket II »

Offline Paul G

  • Posts: 1914
Re: What about a show your toolbox thread?
« Reply #6 on: June 27, 2016, 02:02 AM »
Should know the facts before pursuing such an offer, here's my catch-all drawer

246738-0

At least some fare better

246740-1

But unfortunately no lawyers in the family so I couldn't fulfill my side of the deal. Not to mention that box alone would be beyond my budget, but at least there's some decent ones available at the much maligned Harbor Freight for a lot less leaving more cash for a few more Festools
+1

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #7 on: June 27, 2016, 02:17 AM »
Now that's not too bad, you can still see the bottom of the drawer in some spots of your catch all drawer  [big grin]  [big grin]  [big grin]

A toolbox is a toolbox, and if you're happy with it and it fits your needs thats all that matters. Spending and calculating efficiently is a good thing, no questions there.  [smile]

Kind regards,
Oliver

Offline Kev

  • Posts: 7647
Re: What about a show your toolbox thread?
« Reply #8 on: June 27, 2016, 03:58 AM »
Ah .. this is something that I need to address - one day! I could easily fill 2 or 3 roller cabs with the stuff I've got, let alone the stuff I want. Problem is .. you need somewhere to roll them to, which is what I'm horribly lacking where I am today.



Offline #Tee

  • Posts: 786
Re: What about a show your toolbox thread?
« Reply #9 on: June 27, 2016, 04:34 AM »
I just made this tool cart and it doubles as my work bench outfeed/support. i did the top below sea level lol cause i wanted to swipe and dump small bench top items over incase i need a flat surface to work on. i had scrap carbon fiber and some metal tubing left over from a project so i made this with about 30 bucks worth of extras.



then i got bored and pimped out my new sys combi :)





When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline Kev

  • Posts: 7647
Re: What about a show your toolbox thread?
« Reply #10 on: June 27, 2016, 04:43 AM »
I just made this tool cart and it doubles as my work bench outfeed/support. i did the top below sea level lol cause i wanted to swipe and dump small bench top items over incase i need a flat surface to work on. i had scrap carbon fiber and some metal tubing left over from a project so i made this with about 30 bucks worth of extras.



then i got bored and pimped out my new sys combi :)





I hope you're not offended when I say I don't like you very much at the moment  [embarassed]  [sad]

Where's the "ENVY" emoticon when you want it ?!?!?

Offline David Pepke

  • Posts: 39
  • Carpenter's Apprentice
Re: What about a show your toolbox thread?
« Reply #11 on: June 27, 2016, 09:31 AM »
Here's my toolbox. My girlfriend and I get the keys to our new house on friday, and with it comes my first Workshop space. My systainers cant wait to get their own room!

David


Online Peter_C

  • Posts: 464
Re: What about a show your toolbox thread?
« Reply #12 on: June 27, 2016, 10:20 AM »
I gave this away to one of the members on here. One ugly cart, but with some paint... It still functions well enough.



This is what it takes to allow two people to move a mid sized KRL toolbox. The larger tool boxes require a roll back tow truck or kneeling trailer. I put 1/4" plate on top and use this tool box as my work bench. Have rebuilt transmissions and transfer cases on top, and since all my fragile electronics etc are in another box, I have no problem beating bearing races etc on the top of it with a 32oz hammer.



These days this is my most worn toolbox.

« Last Edit: June 27, 2016, 10:22 AM by Peter_C »

Offline HarveyWildes

  • Posts: 609
Re: What about a show your toolbox thread?
« Reply #13 on: June 27, 2016, 10:22 AM »
Here's my toolbox. My girlfriend and I get the keys to our new house on friday, and with it comes my first Workshop space. My systainers cant wait to get their own room!

David

Cool use of space!  I was especially surprised by the bottom drawer, which has more in it than I would have thought possible.  Did you make your own chisel role?

Offline unityroad

  • Posts: 149
  • photos
Re: What about a show your toolbox thread?
« Reply #14 on: June 27, 2016, 01:26 PM »
This is how things end up every time. Works well for me.
You are only as good as your ability to get PAID.

Offline tjbnwi

  • Posts: 5310
  • Cedar Tucky Indiana
Re: What about a show your toolbox thread?
« Reply #15 on: June 27, 2016, 08:22 PM »
The tools that travel with me everyday.  246786-0

One of my tools box sets. Lower is from '73, the tops were replacements in the early '80's. 246788-1

Have to get these back on a wall, pullers and automotive AC service set. 246790-2

Have a socket/wrench/mechanics type setup for field travel.

Tom

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #16 on: June 27, 2016, 09:06 PM »
Snap-On Tool Box

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #17 on: June 27, 2016, 09:17 PM »
Thanks for sharing everyone, very cool pictures!

@BadRobot You get extra credit because you shared something I have heard of, but never seen before. Very cool, thank you so much for sharing! Could you tell me a little about how the Tool Control System works?

Kind regards,
Oliver

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #18 on: June 27, 2016, 09:36 PM »

Thanks for sharing everyone, very cool pictures!

@BadRobot You get extra credit because you shared something I have heard of, but never seen before. Very cool, thank you so much for sharing! Could you tell me a little about how the Tool Control System works?

Kind regards,
Oliver

Just read it from the source.  It will be more accurate than my explanation.
https://www1.snapon.com/Industrial/Programs/Tool_Control.nws

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #19 on: June 27, 2016, 09:38 PM »
Will do, thanks! :)

Kind regards,
Oliver

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #20 on: June 27, 2016, 09:58 PM »
I added some pictures to my initial post to reflect on the direction of the thread - and to do the pedantic in me justice *lol*  [scared] [scared]  [eek] [eek]  [big grin] [big grin]

Kind regards,
Oliver

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #21 on: June 27, 2016, 10:19 PM »
Found a great video on Snap-On's ATC Level 5 - Just in case anyone else is interested. I definitely don't need it, but my pedantic heart screams *yeah* *yeah* *yeah*  [eek] [eek]  [scared] [scared]  [big grin] [big grin] Maybe, just maybe, if I ever upgrade my box...



Kind regards,
Oliver

Online Peter_C

  • Posts: 464
Re: What about a show your toolbox thread?
« Reply #22 on: June 27, 2016, 11:29 PM »
Found a great video on Snap-On's ATC Level 5 - Just in case anyone else is interested. I definitely don't need it, but my pedantic heart screams *yeah* *yeah* *yeah*  [eek] [eek]  [scared] [scared]  [big grin] [big grin] Maybe, just maybe, if I ever upgrade my box...

Kind regards,
Oliver
Yeah, yeah, and at that tool density rate I would only need 14 or so of the 54" version tool boxes [eek]

After about an hour of use hearing her talk I would also be unplugging it  [mad]

Snap-on has a lot of industrial customers like the military, plus regular tool dealers that cover airports, and other scenarios where that setup is excellent for compliance. I could see it working in a quick lube type setting so tools don't walk off or get left under hood, but it may cost prohibitive.

Offline WarnerConstCo.

  • Posts: 4076
    • Warner Mill Works
Re: What about a show your toolbox thread?
« Reply #23 on: June 28, 2016, 12:17 AM »
The tools are suppose to go back into the tool box?

I have numerous vintage Kennedy boxes, but most times they are empty....

Offline Elmar50

  • Posts: 55
Re: What about a show your toolbox thread?
« Reply #24 on: June 28, 2016, 01:02 AM »
Glad to see others using SnapOn boxes for woodworking stuff. I much prefer using metal toolboxes- SnapOn, Gladiator and HarborFreight than wall mounted shelves- less clutter, less stuff for dust to attach itself to.

Offline David Pepke

  • Posts: 39
  • Carpenter's Apprentice
Re: What about a show your toolbox thread?
« Reply #25 on: June 28, 2016, 03:27 AM »
Here's my toolbox. My girlfriend and I get the keys to our new house on friday, and with it comes my first Workshop space. My systainers cant wait to get their own room!

David

Cool use of space!  I was especially surprised by the bottom drawer, which has more in it than I would have thought possible.  Did you make your own chisel role?
My girlfriend made the tool roll for me. Still in the process of filling it up with good chisels - a Nice roll deserves Nice chisels right?

And yeah, the japanese saws for perfectly in the drawer when taken apart...

Sendt fra min ONE A2003 med Tapatalk


Offline WastedP

  • Posts: 343
Re: What about a show your toolbox thread?
« Reply #26 on: June 28, 2016, 10:07 AM »
I made a plywood insert for a SYS-4 so I can haul my install drills and charger with my minis full of ways to solve other people's problems.  I have the SYS-1 with organizers on top for basic fasteners, hole saws, and drill bits.  If I have to go on site, I just take the whole box in one hand and my toolbelt in the other.

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #27 on: June 28, 2016, 04:47 PM »
One of my classic Systainers.


Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #28 on: June 28, 2016, 04:54 PM »
Found a great video on Snap-On's ATC Level 5 - Just in case anyone else is interested. I definitely don't need it, but my pedantic heart screams *yeah* *yeah* *yeah*  [eek] [eek]  [scared] [scared]  [big grin] [big grin] Maybe, just maybe, if I ever upgrade my box...



Kind regards,
Oliver

I think it depends on the job that you perform.  I would requires airplane mechanics to use this system.  I wish doctors in ER using this type of system so they did not forget surgery knife in patient bodies. LOL.

Offline six-point socket II

  • Posts: 459
  • aka @the_black_tie_diyer
    • Portfolio
Re: What about a show your toolbox thread?
« Reply #29 on: June 28, 2016, 04:59 PM »

I think it depends on the job that you perform.  I would requires airplane mechanics to use this system.  I wish doctors in ER using this type of system so they did not forget surgery knife in patient bodies. LOL.

Absolutely! LOL  [big grin] [big grin]  If I interpret the first picture of your SO Toolbox right, you work on Boings?

Kind regards,
Oliver

Offline WastedP

  • Posts: 343
Re: What about a show your toolbox thread?
« Reply #30 on: June 28, 2016, 08:03 PM »
I wish doctors in ER using this type of system so they did not forget surgery knife in patient bodies. LOL.

In the hospital I worked in, every surgical tool and rag had a barcode on it that was scanned with a handheld Symbol unit when the item entered the operating theatre and scanned again when it was put in the bin for sterile processing.  Things that were intended to be left inside a patient were also scanned.  There were PC workstations in each OT where the surgical tech responsible for keeping track of inventory could double-check stuff, and even send the info to a monitor on a boom arm next to the cutting area.  They were big on lean manufacturing processes to cut costs and errors in surgery, but the enthusiasm for efficiency never made it to the managers of the on-site cabinet and countertop shop.

Online RKA

  • Posts: 922
Re: What about a show your toolbox thread?
« Reply #31 on: June 28, 2016, 09:09 PM »
You know, it's funny, my auto related tools are in a large KRL toolbox, mostly organized neatly as Oliver's is.  And everything gets wiped down before its stowed.  The deeper drawers invite some chaos.  For years I had inadequate storage and things were all over the place and now everything for working on the cars fits in the box with room to spare.

But the woodworking tools...I only have a small tool box in the basement and everything else is scattered everywhere...complete chaos!  Like a hoarders episode.  Need to build some tool organization down there!  There is no horizontal surface that doesn't have stuff on it.
-Raj

Offline Cheese

  • Posts: 3733
Re: What about a show your toolbox thread?
« Reply #32 on: June 29, 2016, 10:35 AM »
Found a great video on Snap-On's ATC Level 5 - Just in case anyone else is interested.

Thanks for posting Oliver, I didn't know Snap-on offered this service.  [thumbs up]  It's pretty user friendly and transparent except for that nagging voice in the background. Strictly a vision system application.

Way better than scanning with a Symbol scanner all the time, that'd certainly become a PITA.

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #33 on: June 29, 2016, 07:02 PM »
This is my custom built Sys Port.  It built from 80/20 T-Slot Aluminum Extrusion.


Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #34 on: June 29, 2016, 07:07 PM »
This is my woodworking measuring tools.  I don't have much space on my wall.  So I stacked them up.

Offline Knight Woodworks

  • Posts: 194
Re: What about a show your toolbox thread?
« Reply #35 on: June 30, 2016, 09:34 AM »
Bad Bot,

Like that Sys Port built with 80/20, got any more pics?

John

Offline Cheese

  • Posts: 3733
Re: What about a show your toolbox thread?
« Reply #36 on: June 30, 2016, 11:58 AM »
@BadRobot

I also like 80/20 SYS Port. How are the shelves/drawers held in?

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #37 on: July 10, 2016, 05:24 PM »
@BadRobot

I also like 80/20 SYS Port. How are the shelves/drawers held in?

Here they are.

This is the first generation.  I am working on dual stack that can fit both Systainer and Harbor Freight storage boxes in the same rack without each horizontal t-slot for each rail.


Offline Cheese

  • Posts: 3733
Re: What about a show your toolbox thread?
« Reply #38 on: July 10, 2016, 05:46 PM »
Got it, thanks...so you're just fastening the slides directly to 80/20 side supports?

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #39 on: July 10, 2016, 05:55 PM »
Got it, thanks...so you're just fastening the slides directly to 80/20 side supports?

Yes, based on this version, I just adjust the T-Slot side rail up or down.  So I don't have to pre-drill holes as plywood.  The second version does not use horizontal side rails.  It drives the cost down a lot.

Offline Knight Woodworks

  • Posts: 194
Re: What about a show your toolbox thread?
« Reply #40 on: July 10, 2016, 06:00 PM »
Thanks for the show and tell, that's pretty cool.

John

Offline leakyroof

  • Posts: 1973
Re: What about a show your toolbox thread?
« Reply #41 on: July 11, 2016, 09:43 PM »
2 drawers only for now. Screwdrivers and Pliers or 'plier-ish'
Not as many Sanders as PA Floor guy.....

Offline leakyroof

  • Posts: 1973
Re: What about a show your toolbox thread?
« Reply #42 on: July 11, 2016, 09:46 PM »
Pliers. Only the most used ones get the tidy-out in front location of the drawer.. [wink]
Not as many Sanders as PA Floor guy.....

Offline typeshige

  • Posts: 17
Re: What about a show your toolbox thread?
« Reply #43 on: July 12, 2016, 01:02 AM »
Regarding that 8020 one, what's your method of making accurate repeatable cuts to the T slots?

That looks great and hopefully you don't mind others borrowing some ideas!

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #44 on: July 12, 2016, 11:55 AM »
Regarding that 8020 one, what's your method of making accurate repeatable cuts to the T slots?

That looks great and hopefully you don't mind others borrowing some ideas!

There are 2 methods that I can think of.
1. Buy t-slot from 80/20 with the length you need.  So it is pre-cut and square with pre-tab and counter bore as option.  Just kidding but it work if you don't do a lot of cutting, it might be cheaper.
2. Buy aluminum blade and put it in TS 55 REQ.  Then cut to specific length on MFT/3.

I don't want to steal this thread.  I will create a new post for 80/20 Sysport after I take an exam this week.  I have 2 versions of 80/20 Sysports.  One is what you saw here.  Another one is double stack.  I can put either Systainers or Harbor Freight storage boxes in the same rack.  I also made 80/20 gig to drill counter bores and holes for end fasteners on a drill press.

Offline Cheese

  • Posts: 3733
Re: What about a show your toolbox thread?
« Reply #45 on: July 12, 2016, 12:52 PM »
There are 2 methods that I can think of.
1. Buy t-slot from 80/20 with the length you need.  So it is pre-cut and square with pre-tab and counter bore as option.  Just kidding but it work if you don't do a lot of cutting, it might be cheaper.
2. Buy aluminum blade and put it in TS 55 REQ.  Then cut to specific length on MFT/3.

Here are 2 more...put a Festool aluminum blade (495385) on a Kapex or invest in a low RPM chop saw and cut all metals including stainless.
« Last Edit: July 12, 2016, 12:56 PM by Cheese »

Offline BadRobot

  • Posts: 46
Re: What about a show your toolbox thread?
« Reply #46 on: July 12, 2016, 05:30 PM »
This is mine.  If the aluminum extrusions are long, I just connect one side to my Sysport which has a horizontal bars so I can cut up to 110" long.


Offline Kevin C.

  • Posts: 95
Re: What about a show your toolbox thread?
« Reply #47 on: July 15, 2016, 04:53 PM »
My first toolbox. Built in 2006. Maple veneered baltic birch. Walnut handles and full extention drawer slides. Holds all my mechanics tools, and plenty of woodworking tools as well.

Offline HarveyWildes

  • Posts: 609
Re: What about a show your toolbox thread?
« Reply #48 on: July 19, 2016, 12:29 PM »
When I built my bench, I built a tool box to fit underneath.  When I first built it, there was plenty of room, but now it's crowded and I need to figure out what I want for my next toolbox.

248024-0

248026-1

Offline Michel

  • Posts: 11
Re: What about a show your toolbox thread?
« Reply #49 on: October 30, 2016, 12:21 PM »
I think this is my first post on the FOG. Ive built this toolbox to bring the handtools I use in school everyday. I also bring a combi systainer with a cxs, hearing protection, drills, bits etc. Ive been a carpenter for 10 years, and back problems made me start in school again. If everything goes well, im an educated cabinetmaker/furnituremaker in march 2018. And now to the toolbox ! :)

The box is inspired by Tom Fidgens Cabinetmakers Toolchest, from Unplugged Workshop. It is made from danish oak and american walnut.



« Last Edit: October 30, 2016, 12:28 PM by Michel »

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8078
  • Finger Lakes Region, NY State , USA
Re: What about a show your toolbox thread?
« Reply #50 on: October 30, 2016, 12:24 PM »
I think this is my first post on the FOG. Ive built this toolbox to bring the handtools I use in school everyday. I also bring a combi systainer with a cxs, hearing protection, drills, bits etc. Ive been a carpenter for 10 years, and back problems made me start in school again. If everything goes well, im an educated cabinetmaker/furnituremaker in march 2018. And now to the toolbox ! :)

The box is inspired by Tom Fidgens Cabinetmakers Toolchest, from Unplugged Workshop. It is made from dansih oak and american walnut.



Hi Michel,

    Welcome to the forum!  [smile]

    Very nice and great first post!!  [thumbs up]

Seth

Offline RickyL

  • Posts: 68
Re: What about a show your toolbox thread?
« Reply #51 on: November 12, 2016, 05:35 PM »
This is my "home" toolbox. In the workshop I have, 9 boxes!  :-[

TXS, TSC 55REB, CTL Midi, BHC 18, C18Li, T18+3, PSC 420EB, Kapex KS120 EB, OF1400, EHL 65 EQ, ETS EC150/5, RO150 FEQ

Offline Michel

  • Posts: 11
Re: What about a show your toolbox thread?
« Reply #52 on: November 13, 2016, 11:50 AM »
This is my "home" toolbox. In the workshop I have, 9 boxes!  :-[

That my friend, is either a very large toolbox, or a very small workshop ! :)

Offline RickyL

  • Posts: 68
Re: What about a show your toolbox thread?
« Reply #53 on: February 26, 2017, 04:46 AM »
Heres one wall at work the other wall is the same.

TXS, TSC 55REB, CTL Midi, BHC 18, C18Li, T18+3, PSC 420EB, Kapex KS120 EB, OF1400, EHL 65 EQ, ETS EC150/5, RO150 FEQ

Offline demographic

  • Posts: 322
Re: What about a show your toolbox thread?
« Reply #54 on: June 18, 2017, 02:09 PM »
Toolbox eh?

Main one is the van, then there's a large toolsafe in it.
this is pretty much the van contents...


Everything in this stack in the centre of the photo fits into the toolsafe...


and this, although its my old van that I no longer have (sames true for the dog sadly) it shows the toolsafe.


That toolsafe holds a fairly serious amount of kit, its not always easy to get at but its always pretty secure, which matters a lot to me.

Offline Trevin

  • Posts: 71
Re: What about a show your toolbox thread?
« Reply #55 on: June 19, 2017, 03:32 PM »
Well this is still work in progress but have some of the drawers done.  I really like the Kaizen foam.

Thanks,
Trevin

Festool: MFT3 (x2), OF1010, OF1400, LR32, Domino DF500, Domino XL DF700, Kapex KS120, TS-75, Carvex 420, CXS, C-18, Vecturo OS 400, DTS 400, Pro 5, Rotex 125, VAC-PMP, VAC-SYS-1, VAC-SYS-2, CT-26 (x2), CT-SYS, SYS Light DUO, SYS-ROCK
Other: Minmax FS41, Sawstop PCS (3HP, 52"), Laguna BX14, Jet 17" Drill Press, Rikon 70-220VSR Lathe, Incra LS Router Station, Laguna P/Flux 3 Dust Collector

Offline Mitchewd

  • Posts: 60
Re: What about a show your toolbox thread?
« Reply #56 on: June 20, 2017, 12:15 AM »
Added my take on a Dutch tool chest HERE

I am working on a rolling sys-port cart with a fold up tray...almost done!