« previous next »
Pages: [1]   Go Down

Author Topic: Video Review of Festool MFK-700 (574288)  (Read 17884 times)

0 Members and 1 Guest are viewing this topic.

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Video Review of Festool MFK-700 (574288)
« on: February 01, 2011, 06:54 AM »
Here is my video review of the MFK-700, a router shrouded in some mystery due to some limitations; in my review, I describe the MFK-700 fully but also point out some of the short-comings and present workarounds that I've done and published on my blog.

« Last Edit: February 01, 2011, 11:49 AM by PaulMarcel »
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: Video Review of Festool MFK-700 (574288)
« Reply #1 on: February 01, 2011, 12:26 PM »
Nice video, Paul. @2:35, it's not a "stop", we call it the "feeler bearing". Members may be interested in more details on your modifications to accommodate longer bits.
Logged

Offline Brice Burrell

  • Posts: 7388
Re: Video Review of Festool MFK-700 (574288)
« Reply #2 on: February 01, 2011, 01:02 PM »
Quote from: Shane Holland on February 01, 2011, 12:26 PM
...Members may be interested in more details on your modifications to accommodate longer bits.

Yes, I agree. Half inch shy, Festool MFK router.
Logged

Offline RL

  • Posts: 3040
Re: Video Review of Festool MFK-700 (574288)
« Reply #3 on: February 01, 2011, 01:27 PM »
Another good review,

Thanks!
Logged

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #4 on: February 01, 2011, 01:40 PM »
Richard is my new favorite FOGger :)  thanks for the compliments!  [embarassed]
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline tDot

  • Posts: 87
Re: Video Review of Festool MFK-700 (574288)
« Reply #5 on: February 01, 2011, 07:02 PM »
Really?!?!  Garage door open... at night... in January... show off!  (I'm jealous)
Logged

Offline GhostFist

  • Posts: 1556
Re: Video Review of Festool MFK-700 (574288)
« Reply #6 on: February 01, 2011, 07:57 PM »
Awesome vid! At first glance I thought to myself "How big is this guy's freaking shop?" as I couldn't see the end of it then i realized the garage door was open haha. Ya I didn't know too much about this router iuntil this video, would like to see some more action shots though.
Logged

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #7 on: February 01, 2011, 09:42 PM »
It's an endless shop :)  Actually wondered if all of you thought I only used that little corner of my shop since I'm always there!

In action here's a dust-collection demo video I did for someone awhile back.  It was pretty impromptu, but you get to see me making tiny molding for stairs and the effectiveness of the DC.

Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #8 on: February 01, 2011, 10:27 PM »
Quote from: tDot on February 01, 2011, 07:02 PM
Really?!?!  Garage door open... at night... in January... show off!  (I'm jealous)

We're a little like the southern hemisphere here in Arizona.  It's nice all winter, but get back to me in August...  [eek]
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline Ken Nagrod

  • Restricted
  • Posts: 3438
Re: Video Review of Festool MFK-700 (574288)
« Reply #9 on: February 02, 2011, 12:29 AM »
So Paul, do you think you would have had less build-up inside the MFK 700 if you had taken smaller depths of cut and more than 2 passes?  You seem to have shown that you filled up the collet area after that first pass, like you were overloading the router and the dust extraction?  [unsure]
Logged

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #10 on: February 02, 2011, 01:06 AM »
I think the D36 hose would have worked better.  Even a small router is a dust and chip devil.  Once a few chips pile up near the collet, others get caught and it snowballs.

I'd have to re-watch the video to see exactly what you mean as I filmed that back in October IIRC.  I wouldn't want to take an extra pass.  If anything, give it a shake after one pass or use the D36 hose.
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline Frank Pellow

  • Posts: 2748
  • Toronto, Ontario and Lake Pivabiska, Ontario
Re: Video Review of Festool MFK-700 (574288)
« Reply #11 on: February 02, 2011, 07:39 PM »
Thanks Paul, I learned more about this router watching these two videos than from any previous source of information.
Logged
Cheers,   
               Frank (Festool connoisseur)

Offline lambeater

  • Posts: 482
Re: Video Review of Festool MFK-700 (574288)
« Reply #12 on: February 03, 2011, 10:23 AM »
Morning Shane, just trying to figure out the set. Does it come with the edge guide or was it added to the video review set.

thx
Lambeater
Logged

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #13 on: February 04, 2011, 12:52 AM »
Hi, Lambeater...

I downloaded the manual today for the MFK-700 (faster than finding it in the shop  [embarassed]) and it indicates the edge-guide is an accessory.  Note, too, that the 0º base is an accessory as well; the kit comes with the vertical and 1.5º bases.

If there's a dealer with one on display in your area, bring a chunk of wood and a 1/4" or 8mm bit to the store to try it out.  With the dust shroud on it, I actually wouldn't be concerned at all running it in the store.
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline lambeater

  • Posts: 482
Re: Video Review of Festool MFK-700 (574288)
« Reply #14 on: February 04, 2011, 09:51 AM »
Thanks Paul, I shouldhave checked my kit better. Guess its time to buy one.

Lambeater
Logged

Offline Wood_Junkie

  • Posts: 1313
Re: Video Review of Festool MFK-700 (574288)
« Reply #15 on: February 05, 2011, 02:24 PM »
One side bit of good news...

If you get the 0o base and the edge guide, you can actually fit it ALL (Minus the power cord  hahahaha!)  into the Systainer 2 that the MFK comes it.  It's tight, but all three bases and edge guide fit in there, along with the other little pieces.

I've been meaning to take some photos of the Systainer locations of things to post, but haven't had time.
Logged

Offline Julian Tracy

  • Posts: 529
    • Renovation By Design, Inc.
Re: Video Review of Festool MFK-700 (574288)
« Reply #16 on: August 31, 2011, 09:39 PM »
Hi Paul,

I found it odd that you'd suggest the 1400 for inlay work...  Although it has tons more visibility compared to the mfk, it's not that great when compared to the OF1010 and it's way overkill for inlay work.

With the dust shroud attachement on the 1400, I find the visibility to be not that great, whereas the 1010's thru-the-base design allows perfect viewing of the cutting action.

Also, the 1400 is quite a heavy router and if you didn't need the power, which you don't for inlay work, why deal with it.

1010's the perfect router in my book.

Just got the MFK 700 and looking forward to figuring it out...

Julian
Logged

Offline PaulMarcel

  • Posts: 1542
    • Voilà, my blog
Re: Video Review of Festool MFK-700 (574288)
« Reply #17 on: August 31, 2011, 11:20 PM »
Sounds like the OF-1010 would be better given the visibility.  I don't have one and have never used one so I couldn't comment on it.  I like the added weight of the OF-1400 vs the MFK-700 since it gives a great deal of control, though.  For the little bit of dust, I actually use it without the shroud, but I'm talking about cutting down 1/8"ish.

Thanks for pointing that out, though; someday I'll have to give that router a spin.
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk
Pages: [1]   Go Up
« previous next »