Author Topic: Sustainor w attic for Rigid drill  (Read 2180 times)

0 Members and 1 Guest are viewing this topic.

Offline Slowlearner

  • Posts: 62
Sustainor w attic for Rigid drill
« on: April 29, 2019, 01:17 PM »
Are there sustainors out there that will hold 18v rigid drill w battery and has an attic up top for bits anchors etc. I guess basically the festool drill sustainor empty thx

Online Dick Mahany

  • Posts: 481
Re: Sustainor w attic for Rigid drill
« Reply #1 on: April 29, 2019, 01:22 PM »
Lee Valley has the Tanos Sys 2 with attic lid.  I did what you are inquiring about except with a DeWalt drill so I would think the Ridgid should fit fine.  Very handy set up. Lee Valley also have the inserts to hold bits that fit into the attic compartments.



« Last Edit: April 29, 2019, 01:38 PM by Dick Mahany »

Offline Slowlearner

  • Posts: 62
Re: Sustainor w attic for Rigid drill
« Reply #2 on: April 29, 2019, 01:45 PM »
Yes this is it. Drills are probaly the same just about thx very much

Offline demographic

  • Posts: 501
Re: Sustainor w attic for Rigid drill
« Reply #3 on: April 29, 2019, 02:19 PM »
I've been using a Systainer 3 for my Hitachi drill driver, impact screwdriver, charger, large combination square, blockplane, snips, end cutters and a few other stuff with an attic lid for bits.
Sort of my everyday items.

I'm just not an assassin case with everything all nested in little foam cutouts type, can't be done with all the wasted space so they a just go in the box.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8892
  • Finger Lakes Region, NY State , USA
Re: Sustainor w attic for Rigid drill
« Reply #4 on: April 29, 2019, 03:22 PM »
You can get an Orange handle and latch too ! Or anthracite Sys and add orange latch...........  etc.  [smile]


Seth

Online Dick Mahany

  • Posts: 481
Re: Sustainor w attic for Rigid drill
« Reply #5 on: April 29, 2019, 03:27 PM »
You can get an Orange handle and latch too ! Or anthracite Sys and add orange latch...........  etc.  [smile]


Seth

Yes you can.  I forgot Ridgid and Fein have similar color schemes  [big grin]  I've recently been adopting colored latches to help me spot different tools from across the shop since the labels are getting too small for these eyes.

« Last Edit: April 29, 2019, 03:32 PM by Dick Mahany »