Author Topic: extended router base for routing window  (Read 1901 times)

0 Members and 1 Guest are viewing this topic.

Offline Russty

  • Posts: 18
extended router base for routing window
« on: April 27, 2019, 04:43 AM »
thought this might be useful inspiration to anyone who needs to do some awkward routing. the beginning of the video shows how i made the rebates deeper on a window. i made the window for 12mm sealed units and then decided to go with 16mm which needs deeper rebates.
the larger router base is made from 6mm tufnol and recessed to make it effectively the same thickness as a standard base plate, i use this quite often and in this case just stuck some aluminium angle and flat bar for extended support.
296749-0


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline duburban

  • Posts: 1041
Re: extended router base for routing window
« Reply #1 on: April 27, 2019, 11:16 PM »
Nice. I was just doing this for an end panel was wishing I had this. Like the channel and the "mm" units.
helper: i used a festool "circular saw" to do something simple and it made it really hard

me: exactly, it makes simple cuts complicated and complicated cuts simple

Offline Chris Cianci

  • Posts: 40
Re: extended router base for routing window
« Reply #2 on: May 11, 2019, 02:03 PM »
Rusty Thanks for sharing it let’s me know what is possible
Best