Author Topic: Video :How to mount the TS 75 to a CMS module plate  (Read 2884 times)

0 Members and 1 Guest are viewing this topic.

Offline Nigel

  • Posts: 641
Video :How to mount the TS 75 to a CMS module plate
« on: November 30, 2011, 01:02 AM »
There was talk a while back about someone doing a video to show this but no-one came up with one so yesterday I made this for those interested.

 Mounting the TS 75 to the cms module plate:



Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Bainiet

  • Posts: 23
Re: Video :How to mount the TS 75 to a CMS module plate
« Reply #1 on: November 30, 2011, 01:30 AM »
 [thanks]

Finally I know how to exchange the riving knife and put on the protective cover.  [tongue]  Although not as safe, with the standard riving knive I can see the blade more clearly and make 'hidden' sawcuts.

@Nigel: Why locking the depth adjuster before screwing it thight? I must check this (Let's go digging for the manual) but can't the depth adjuster be fixed while leaving the saw in its zero depth position?
Why does the stockpile of white+green boxes grow? It started with just 1, now it's over 26...

Offline Nigel

  • Posts: 641
Re: Video :How to mount the TS 75 to a CMS module plate
« Reply #2 on: November 30, 2011, 03:10 AM »
[thanks]

Finally I know how to exchange the riving knife and put on the protective cover.  [tongue]  Although not as safe, with the standard riving knive I can see the blade more clearly and make 'hidden' sawcuts.

@Nigel: Why locking the depth adjuster before screwing it thight? I must check this (Let's go digging for the manual) but can't the depth adjuster be fixed while leaving the saw in its zero depth position?


Hi Bainiet,

I just  just nip the depth adjuster to hold it in place and plunge the saw because the saw is in a permanently slightly plunged position in the module.You don't want to tighten it too muchso it won't bolt down.I find it easier but it may not be the way described in the manual.I doubt I've even read the manual.  [embarassed].You can do it without plunging first I think.

The riving knife can be difficult however it just went on easy in the vid.I always completely unscrew the mounting screw for mounting that one.It takes a while to get the hang of it but it does make a difference to the dust extraction.

Nigel
« Last Edit: November 30, 2011, 03:21 AM by Nigel »