Author Topic: More fun with 80/20...??  (Read 196655 times)

0 Members and 1 Guest are viewing this topic.

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #180 on: May 13, 2019, 08:25 AM »
Richard - I can't believe I'm seeing what I'm seeing!
You have sent some serious time thinking this through. The homs shop equivalent of the TINY HOUSE movement.

Thank you for sharing this inspiration.

Hans

Thanks Hans, high praise coming from you. There's another thread that started in 2014 when the shop refurb began. 2014!?!

It kind of died off a couple years ago, these recent posts are rightfully part of that conversation but 80/20 is tangled throughout.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #181 on: May 13, 2019, 08:27 AM »
Looks good Richard. On the vise, is it just handle hitting the work bench? Can you get rid of the handle and substitute something that you could use a ratchet and a socket on?

Ron

Yup. Not fun opening it 1/2 revolution at a time. The ratchet is a great idea, might be a project to adapt a ratcheting box wrench into a handle.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #182 on: May 13, 2019, 08:28 AM »
Nice stuff Richard...although I do think the Milwaukee chop deserves a better position than being just 2" above high tide.  [poke] [poke]

Go ahead, rub it in...

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #183 on: May 13, 2019, 08:30 AM »
Fazzio's is a great place isn't it Rich. Been going there for 30+ years, back when it was just a hole in the wall and nothing but surplus and nuts-n-bolts.

Perhaps I'll see you there. I'll be the guy wandering around the surplus area Saturday mornings with the dazed look & drool puddle...

Only storage space and lack of a 40' flatbed have saved me so far.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #184 on: May 13, 2019, 08:35 AM »
Does Fazzio's have 80/20?
I've frequently bought Aluminum there, but haven't seen any in the front section.

How do you guys buy steel when you go there?  Do you have to call first and get a quote?  I like their Al section where you can just go and pick out what you want.

@jaguar36 negative on the 80/20, darn it.

Their material lists are online, I peruse the list before going and pick out stuff that's stocked in 5-6' sections for ease of handling. Just go to the counter with your list and they take the order, then go browse the store until they call to let you know it's ready. You can add AL to the haul when you go to pay for the steel. Pay and load.

FWIW all the non-Bargain steel seems to be around $1/# on average.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Cheese

  • Posts: 6377
Re: More fun with 80/20...??
« Reply #185 on: May 13, 2019, 09:36 AM »
A few questions Richard...

What model Miller is that?

I really like the Zyliss  [big grin]  It just mounts to the 80/20?  Will it accommodate both 15 series and 40 series?

If you have an opening on the LH side of the table, could you pull the Zyliss apart and reassemble it so the handle would be on the LH side of the vise rather than on the RH side?

If not, you could always mount a socket on an extra cordless drill and have at it.

I also really like those X slab legs you made. Very nice.  [big grin]  Are they stainless?
« Last Edit: May 13, 2019, 10:04 AM by Cheese »

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #186 on: May 13, 2019, 12:04 PM »
A few questions Richard...

What model Miller is that?

I really like the Zyliss  [big grin]  It just mounts to the 80/20?  Will it accommodate both 15 series and 40 series?

If you have an opening on the LH side of the table, could you pull the Zyliss apart and reassemble it so the handle would be on the LH side of the vise rather than on the RH side?

If not, you could always mount a socket on an extra cordless drill and have at it.

I also really like those X slab legs you made. Very nice.  [big grin]  Are they stainless?

@Cheese the Miller is 211, 115/230M MIG only. Really nice welder, years ago I had a 230V only Miller that was 5 times the size and this one on 230V lays down as nice a bead. Also had a 115V Miller that SS Sandy got, was never happy with it as I couldn't get good penetration.

Really debated MIG versus AC/DC TIG for the ability to weld AL & steel. The 215 is a similar machine with AC TIG added so still steel only. Finally went with what I was familiar with (pull trigger-weld steel) with plans to add a dedicated AC/DC TIG machine someday.

The Z vise clamps open to about 1-7/8" so they'll fit 40mm no problem. Yes the vice can be configured either RH or LH, but it's really meant to be used at the end of a bench rather than the middle hence the handle problem.



Thanks, the legs are just bare carbon steel waiting for patina and lacquer. I'm pretty surprised they haven't developed surface rust by now since they sat under that table all winter.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Bob D.

  • Posts: 1266
Re: More fun with 80/20...??
« Reply #187 on: May 13, 2019, 04:26 PM »
It's changed somewhat from the way it used to be years ago. The Al shed you could walk in and everything was there and you gathered up what you wanted, weighed it, got a slip and went inside and paid.

Now that they have expanded and become a full industrial supply house with an expanded range and selection of metals, you go to the desk and order what you want, one of their people will assemble the order, you pay and load out.

Prices for most metals are posted on the wall.

The old hardware store and the nut & bolt room are still there, but the new side of the place has taken over most of the traffic there I would say.

Their online catalog give fairly easy to navigate. And you can order online and have material shipped to you I believe. They have an operation in Delaware too just after you cross the bridge. Never stopped in there though.

https://www.shopjfi.com/
-----
It's a table saw, do you know where your fingers are?

Offline Richard/RMW

  • Posts: 1915
Re: More fun with 80/20...??
« Reply #188 on: May 22, 2019, 09:01 AM »
This place is darned near spacious when it's in the 60's and sunny.







Even have a new miter saw station...



Bench tools rearranged so everything can now be pulled forward and used, pushed back to clear a little worktop:



Sunday we managed to get one of last years projects assembled and ready to install, an outdoor screen panel for our font deck to improve the appearance of (conceal) our neighbor's front porch.



I did have to break out the steel-toed flip-flops. Looks to be sunny and 60-70's all thru the coming holiday weekend.  [not worthy]

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!