Author Topic: Smart innovations on MFT  (Read 2024 times)

0 Members and 1 Guest are viewing this topic.

Offline Sean KS

  • Posts: 109
Smart innovations on MFT
« on: July 17, 2019, 12:34 PM »
There's always a fair amount of discussion around maximizing MFTs. I stumbled across this version the other day and there's a lot of nuggets in its design and execution. The design of the hinged guide rail bracket looks to really improve functionality in stability and repeatability. In the video it looks like there's a hold down clamp that attaches to the outboard cross cut fence (maximizes the table width), I've never seen an MFT have a clamp like that before, really cool. I like the overall size, shape, and rigidity; you don't see these dimensions often for portable units, but it seems to make the most sense to me. I cook for a living, and have never installed a door, but the little support brackets for the t-tracks on the legs look really handy for people who do. Anyways, pretty smart/inspiring stuff going on with this MFT.

www.youtube.com/watch?v=zW2e6b93mrk&feature=youtu.be
www.dashboardpws.com

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Jiggy Joiner

  • Posts: 692
Re: Smart innovations on MFT
« Reply #1 on: July 17, 2019, 01:31 PM »
Yes it’s a real nice bench, Rob, the designer of it is a member here  [thumbs up]

Offline George Oliver

  • Posts: 36
Re: Smart innovations on MFT
« Reply #2 on: July 17, 2019, 11:45 PM »
That does look quite useful. Its overall size is the same as the work tables (on sawhorses) we use onsite, a size I've found to be the best balancing footprint vs. functionality (we do use mainly 4x8 tables in our shop).

I wonder what price point they're shooting for?

Offline Vondawg

  • Posts: 280
Re: Smart innovations on MFT
« Reply #3 on: July 18, 2019, 07:45 AM »
Has anyone signed on to the 100 needed to start production and what is the cost?
There are no mistakes....just new designs.

Offline Pancha

  • Posts: 23
Re: Smart innovations on MFT
« Reply #4 on: July 21, 2019, 02:57 PM »
Rob is an amazing and stand up guy.  I’ve been beta-testing the Dashboard and it’s accessories for over two years both in the field and in my shop.  I can tell you it has no equal and I can’t imagine working without it.  If you have questions about his product I recommend you contact him via his website.  If you would like to talk to someone who has been using the Dashboard every day for years.  You are more than welcome to contact me through my Instagram @acomitaws or email CameronTrujillo@acomitaworkshop.com.        Also...  I don’t get kickbacks, I’m not on payroll, I have not been compensated in any way.  Thisn’t an advertisement or marketing loophole.  I paid for my tables.  Rob is my friend and I love what he made.  That is all.
« Last Edit: July 21, 2019, 03:29 PM by Pancha »

Offline c_dwyer

  • Posts: 150
Re: Smart innovations on MFT
« Reply #5 on: July 22, 2019, 02:18 PM »
I tried a few times to send a note of interest in being an early adopter, but the link (send) button doesn't seem to be working.

If anyone can reach out to Rob and let him know to check out the link, we'd both probably appreciate it.

Offline Michael Kellough

  • Posts: 4101
Re: Smart innovations on MFT
« Reply #6 on: July 22, 2019, 02:46 PM »
It is a very interesting work table. If the price is not too high it could be detrimental to sales of the Festool MFT. Therefore, Rob is not permitted to promote his table in this Festool owned forum.

This thread is walking a fine line and posting Rob’s email address might cause the thread to be deleted. Send me a PM if you want his address.

Offline Dane

  • Posts: 365
Re: Smart innovations on MFT
« Reply #7 on: July 22, 2019, 10:44 PM »
I signed up on the website and got an emailed response.  You might check your spam filter. Sounds like they might be a ways out from production.