Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: 1010 dust collection  (Read 2298 times)

0 Members and 1 Guest are viewing this topic.

Offline ronhokenson

  • Posts: 6
1010 dust collection
« on: February 13, 2009, 10:19 PM »
I am really disappointed with the dust collection on my 1010. I have tried a simple 3/8 roundover using the included chip collector and also using the edge guide I purchased along with the chip collector included with the unit. Doesn't seem to me that I am getting much at all. I use a c-22 for a vacuum.  I note from the picture and description in the catalog that there is a dust collection hood included with the edge guide. There was not one included with my edge guide (489427). Maybe I am missing a part. Do any others have complaints with not catching enough dust when edging ?

The main reason for the purchase of these expensive tools was for the dust collection for me. I now know that there are alot of other quality features to these tools. Any advice would be appreciated, ron

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline neilc

  • Posts: 2703
Re: 1010 dust collection
« Reply #1 on: February 13, 2009, 10:47 PM »
I've had good success using the chip catcher - 493180.  When using bearing-guided edge bits and the vacuum turned up to near highest velocity I've found it does a good job.  It's not 100% collection, but beats any other router I've used.

I also have the dust hood item 484453 that I use from time to time.  While I think it was designed for the V600 dovetail jig, it might be a consideration for you as well.

My edge guide does not have a vacuum hose attachment but it does have a replaceable plastic hood on it per the website.

Good luck -

neil