Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Carvex 420 blade holder came off  (Read 1671 times)

0 Members and 1 Guest are viewing this topic.

Offline Ewoodster

  • Posts: 10
Carvex 420 blade holder came off
« on: February 13, 2018, 03:07 PM »
Hello everyone,

I recently bought a Carvex 420 jigsaw (2 weeks ago) and wanted to take the blade out after cutting a kitchen worktop. I couldn't eject the blade and it took me about a minute to figure out that I forgot to remove the splinterguard. When I finally removed it and wanted to eject the blade, I was quite suprised that the entire blade holder came off and a spring jumped out.

It doesn't look broken, it just looks like it came loose. However I can't figure out to put it back in and prevent it from happening again.

Does anyone have a clue how to fix this or is this a case for a repair?

Picture 1
Picture 2
Picture 3
« Last Edit: February 13, 2018, 03:10 PM by Ewoodster »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Rip Van Winkle

  • Posts: 301
Re: Carvex 420 blade holder came off
« Reply #1 on: February 14, 2018, 07:37 AM »
I just checked the Festool parts catalog. The blade plunger looks to be sold as a single assembled piece, although it’s assembled from a bunch of individual parts. I hope the saw is still under warranty.

Also, the way the plunge post separated from the blade clamp section doesn’t even appear to be separate parts within the assembled unit in the parts diagram. I think the plunge post may have “broken”.


Offline Ewoodster

  • Posts: 10
Re: Carvex 420 blade holder came off
« Reply #2 on: February 16, 2018, 05:02 AM »
Thanks for your reply.

Since the Carvex was brand new I still got warranty. My dealer has sent it in for repair yesterday. Luckily it broke after I was finished with my task.