Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Domino 500 Cross Stop Fix  (Read 947 times)

0 Members and 1 Guest are viewing this topic.

Offline griph0n

  • Posts: 18
Domino 500 Cross Stop Fix
« on: August 23, 2018, 11:03 AM »
When doing multiples (54 Drawers, that's 216 parts, that's....about 1300 plunges)

The Cross Stops need to be checked constantly or they loosen up and fall off.  I started to tighten them up by rotating the internal cam, but that's hard on the plastic.  Now I replace the small internal cam every once and a while and that keeps them going.  I think they cost a dime each when i bought 20 from festool parts.

This drawer session I came up with a new fix with stretchy 3m tape. 

Too bad there is not a robust alternative like the Domi-plate.  I've seen the woodpeckers but it is a little overcomplicated, expensive and not available.

Just thought I'd share my simple fix.
« Last Edit: August 23, 2018, 11:21 AM by griph0n »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline ChuckM

  • Posts: 1170
Re: Domino 500 Cross Stop Fix
« Reply #1 on: August 23, 2018, 11:52 AM »
Can a rubber band do the same trick?

Nice shelving system for the storage of the panels! Did you have the shelves custom-made?

Offline griph0n

  • Posts: 18
Re: Domino 500 Cross Stop Fix
« Reply #2 on: August 23, 2018, 06:39 PM »
Next time I buy Broccoli I'll try the rubber band.  The racks are from Richelieu my hardware supplier.  Reasonably priced.  I used to use them for spraying.  Now I buy prefinished baltic Birch and just wipe the edges a few times.