Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Domino 500 max cut depth  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

Offline rfm

  • Posts: 1
Domino 500 max cut depth
« on: January 16, 2019, 07:47 AM »
It is possible that this question has been already addressed, however I couldn't seem to find a search function on this forum.

I have a newly purchased Domino 500.  It comes with a 5mm bit.  According to the manual, the max cut depth is 28mm.  When I attempted a 28mm test cut with the 5mm bit, the end of the shaft burned the top & bottom of edges of the cut.  The obvious reason for this is that the diameter of the cutter increases toward the mounting point.

I have two problems with this. (1) I cannot find in the documentation where it states that there are differing maximum depths for different cutter diameters, and (2) I cannot understand why this insanely expensive tool wasn't designed such that the advertised max depth would be available for all cutter sizes.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Grev

  • Posts: 145
Re: Domino 500 max cut depth
« Reply #1 on: January 16, 2019, 08:02 AM »
Here's an old thread on this ... hope it helps.
Domino depth of cut

Offline RKA

  • Posts: 1973
Re: Domino 500 max cut depth
« Reply #2 on: January 16, 2019, 09:59 AM »
Unlike a drill the oscillating mechanism puts some lateral forces on the bit.  With the smaller bits there isn't enough meat to withstand those forces and of course the further you go out from the base of the bit the more significant those forces become.  They shortened the bit to offer an added option to use smaller dominos and still provide a service life that's measured in thousands or mortises. 

If you really need a deeper small mortise, maybe a mortising bit in a drill press would be a better option?  Obviously more fiddly, and you have to bring the work to the tool, but it will better meet your needs.