Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Kapex ks 60 adjustments calibration  (Read 1774 times)

0 Members and 1 Guest are viewing this topic.

Offline tazzy18

  • Posts: 1
Kapex ks 60 adjustments calibration
« on: June 04, 2018, 09:28 AM »
Hi all first time post.

Having looked through a few post about adjusting/calibrating a kapex ks 60 all I can find is kapex 120 adjustments. Any one had any luck calibrating the KS60 so all the cuts are square to one another?
I'm having some issues with cuts not aligning up when I do various mitre/bezel cuts.

I havent done the 5 cuts test piece yet but will be looking into it but was hoping someone had made some adjustments already and could put some tips so other people can pick it up if they are having issues.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline paddee87

  • Posts: 10
Re: Kapex ks 60 adjustments calibration
« Reply #1 on: August 13, 2018, 05:39 PM »
ive tried to look for this also to no avail. the only adjustment i can see is on the back fence by slackning off the four bolts