Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Warped Track saw rails  (Read 1146 times)

0 Members and 1 Guest are viewing this topic.

Offline AdirondackJeff

  • Posts: 1
Warped Track saw rails
« on: August 20, 2018, 10:15 AM »
  Just a note for people wanting to order rails through the mail.  You don’t know what you’re getting until you open the box. I just received a 75”  rail through the mail and it was warped from the factory. Had a good 1/8” hook on one end which made it useless. Also the chip guard was way off by about 1/2” from end to end.  Do not assume that these come perfect and ready to do accurate work.  Trust but verify.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Cheese

  • Posts: 6277
Re: Warped Track saw rails
« Reply #1 on: August 20, 2018, 10:44 AM »
That's too bad... [sad] Just curious if that rail is one of the new Made in the USA rails?  Also curious as to how it was packaged?

Whoops...just noticed

 [welcome] to the FOG

Offline rst

  • Posts: 2206
Re: Warped Track saw rails
« Reply #2 on: August 20, 2018, 06:34 PM »
When I bought my recon 55 a couple years ago the rail was off by about 3mm on the last 20".  Uncle Bob gave me Festool's #  They were great, three days later I had a replacement and they did not want the warped one back. I discover the discrepancy when I joined my two 55s together and it ran off of the 8020 extrusion that I used to ensure my joined rails were straight.