Author Topic: Any need for a hose-adapter-maxtrix ?  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

Offline threesixright

  • Posts: 332
Any need for a hose-adapter-maxtrix ?
« on: March 15, 2019, 04:59 AM »
Hi All,

It took me some time before I pulled the trigger on my vac system. I first decided I would make my own. Buy a 'dust deputy' of ali, some hoses and few adapters and grap good deal on some vac. That turned out to be easier said than done. Especially since lots of YT, Blogs are using parts that are not always available or very expensive to ship (or don't ship at all).

Sounds familiar? Or I'm just a moron that can not find the right parts?

Anyway, I was thinking of creating a matrix of (to start with) Festool hose adapters (vac and tool side) that would fit with other correct Festool hoses, 3rd party hoses, and tools. So you can simply lookup what you have and what you need.

Maybe there is no need for it or not?

Thoughts?

Have a great day!
Rog.


Offline Michael Kellough

  • Posts: 4165
Re: Any need for a hose-adapter-maxtrix ?
« Reply #1 on: March 15, 2019, 08:48 AM »
It would be helpful. That DD 90 degree AS fitting rst posted is a good first entry.

Offline Bert Vanderveen

  • Posts: 540
Re: Any need for a hose-adapter-maxtrix ?
« Reply #2 on: March 15, 2019, 11:12 AM »
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE … | Mirka 1230L P&C | Hammer A3 31 Silent Power · Hammer N4400 · Hammer HS950 (soon!) 

Offline Mark Katz

  • Posts: 33
Re: Any need for a hose-adapter-maxtrix ?
« Reply #3 on: March 15, 2019, 03:47 PM »
Add another vote!

Offline DashZero

  • Posts: 100
Re: Any need for a hose-adapter-maxtrix ?
« Reply #4 on: March 16, 2019, 02:25 AM »
yes would be great

Offline Gregor

  • Posts: 1283
Re: Any need for a hose-adapter-maxtrix ?
« Reply #5 on: March 16, 2019, 01:40 PM »
This would be nice, preferably it should include pictures and the product numbers.

Offline threesixright

  • Posts: 332
Re: Any need for a hose-adapter-maxtrix ?
« Reply #6 on: March 17, 2019, 07:46 AM »
Alright! I will make something and take it from there.

In the meantime. If you have a special combo that works, please write me a PM.

- hose diameter (in/out)
- connection side (vav/tool)
- tool connected

Thanks.

Offline JPCleary

  • Posts: 25
Re: Any need for a hose-adapter-maxtrix ?
« Reply #7 on: March 17, 2019, 09:14 AM »
It would be cool if you created a public Google sheet that the FOG community could access to add new combinations of hoses, connectors, etc. over time...a living document.
Not a professional, just a DIY festfool with apparently too much money on his hands -- Kapex120 | TS75 | OF1400 | CT26 | ETS EC125 | Carvex PS420 | CXS | Vecturo | MW 1000 | x2 MFT3 | UG Stand w/ wings