Author Topic: Auriou Gouges for carving  (Read 3877 times)

0 Members and 1 Guest are viewing this topic.

Offline Zacharytanner

  • Posts: 569
Auriou Gouges for carving
« on: April 07, 2014, 08:03 PM »
Looking to get into carving and want to get a great beginning set. Has anyone used these or recommend a good quality set.

Thanks
Frank
Festool Kapex KS 120EB w/ 4 Blades,Domino DF500 Set,Domino DS Systainer 4,5,6,8,10,TS55 w/ FS1400 and FS2700 Rails,MFT/3 with Accessories,CT33E with Hose Caddy and Multiple Hoses,D36 Tradesman,Trion PS300 Jigsaw,RTS 400 EQ Orbital Sander,RO 125,RO125  Abrasive Systainer with , 60,80,100,120,220 Grit Festool paper AND Vlies discs,2 Systainer Carts,Festool T18+3 Kit ,ZOBO Forstner Bits Imperial,CXS Kit with Centrotec Imperial Wood Bits,ETS 150/3,150 Abrasive Systainer with Paper,Festool Toolie,RO 90 ,RO 90 Abrasive Systainer with paper,OF 1010 Router,HL850 Planer,HL850 Rustic Undulating Head,SYS MFT Tabletop Systainer,Veritas Parf Dogs,QWAS Rail Dogs,Precision Dogs,RS2 SanderRS2 Paper Systainer with RUBIN2 150  180  220 Paper and Punch Surfix Systainer
Frank

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline GhostFist

  • Posts: 1556
Re: Auriou Gouges for carving
« Reply #1 on: April 08, 2014, 06:10 PM »
I have the Henry Taylor set from Lee Valley. They're good, nice and sharp right from the factory, handles are a little bit slender though. My carving instructor recommends Hirsch however.

Offline Don T

  • Posts: 1887
  • Phoenix, Az
Re: Auriou Gouges for carving
« Reply #2 on: April 08, 2014, 08:02 PM »
I have the Hirsch.  It's a small set I purchased 25-30 years ago at Silver Dollar City in Branson MO.  Nice set but the carving thing is not for me.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline Zacharytanner

  • Posts: 569
Re: Auriou Gouges for carving
« Reply #3 on: April 08, 2014, 09:34 PM »
Thanks guys... Not sure carving is for me but want to give it try. I was looking to add small decorative carvings to my furniture.

Frank
Festool Kapex KS 120EB w/ 4 Blades,Domino DF500 Set,Domino DS Systainer 4,5,6,8,10,TS55 w/ FS1400 and FS2700 Rails,MFT/3 with Accessories,CT33E with Hose Caddy and Multiple Hoses,D36 Tradesman,Trion PS300 Jigsaw,RTS 400 EQ Orbital Sander,RO 125,RO125  Abrasive Systainer with , 60,80,100,120,220 Grit Festool paper AND Vlies discs,2 Systainer Carts,Festool T18+3 Kit ,ZOBO Forstner Bits Imperial,CXS Kit with Centrotec Imperial Wood Bits,ETS 150/3,150 Abrasive Systainer with Paper,Festool Toolie,RO 90 ,RO 90 Abrasive Systainer with paper,OF 1010 Router,HL850 Planer,HL850 Rustic Undulating Head,SYS MFT Tabletop Systainer,Veritas Parf Dogs,QWAS Rail Dogs,Precision Dogs,RS2 SanderRS2 Paper Systainer with RUBIN2 150  180  220 Paper and Punch Surfix Systainer
Frank