Author Topic: Router Plane.  (Read 2617 times)

0 Members and 1 Guest are viewing this topic.

Offline Birdhunter

  • Posts: 2606
  • Woodworker, Sportsman, Retired
Router Plane.
« on: December 23, 2018, 12:50 PM »
I bought both the big and small LN router planes a few months ago thinking they would be seldom used. I was right about the small one, but I am using the big one often. What a neat tool!
Birdhunter

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2204
Re: Router Plane.
« Reply #1 on: December 23, 2018, 05:40 PM »
I too have both large and small LN routers.  The small one is great for deepening 1/4" grooves for drawer and box bottoms...certainly beats tinkering with the electric router and faster.  Other great LN tools for modifying the above are the side rabbet planes.
« Last Edit: December 23, 2018, 05:43 PM by rst »

Offline tony_sheehan

  • Posts: 118
Re: Router Plane.
« Reply #2 on: December 23, 2018, 05:53 PM »
For those of us with small workshops where things such as electric routers, etc, have to be unpacked and set up in order to complete what are often quite simple tasks; tools such as a router plane are very often so much quicker for basic joinery tasks. Cleaner and quieter too!

Offline ScotF

  • Posts: 2651
Re: Router Plane.
« Reply #3 on: December 24, 2018, 12:36 AM »
I have the small router plane and use it often making furniture. I have thought about adding a larger one, just have not done so. The small one has been a perfect size for lots of projects.

Offline HarveyWildes

  • Posts: 831
Re: Router Plane.
« Reply #4 on: December 24, 2018, 10:52 AM »
I got the Lee Valley version with a few different size blades a while back.  Among other things, I also use it for flattening out the bottoms of saw cut grooves.

Offline Birdhunter

  • Posts: 2606
  • Woodworker, Sportsman, Retired
Re: Router Plane.
« Reply #5 on: December 24, 2018, 04:12 PM »
I picked a great trick from a video on half blind dovetails.

I use a Veritas marking gauge to deeply scribe a line to mark the depth of the dovetails. The line is on the inside of the joint so it doesn’t show.

I use the large router plane to make a shallow rebate. I cut up to the scribed line. It’s deep enough so the rebate is stopped at the line. If necessary, I can clean up the rebate edge with the marking gauge.

I then cut out the dovetail waste as usual. I clamp the pin board vertically in my Moxon vise and butt the dovetail board horizontally against the pin board. The rebate creates a ledge that makes it simple to perfectly mark the pin board.
Birdhunter

Offline derekcohen

  • Posts: 321
    • In The Woodshop
Re: Router Plane.
« Reply #6 on: December 26, 2018, 07:53 PM »
Birdhunter, I have a less invasive method that the "140 trick" - so named as it was made popular by Rob Cosman when he used a skew block plane to make the rebate.

Instead, use three layers of blue tape to create a fence ...



This makes it easier to align and control the pin board when transferring marks ...



The details how to do this are here: http://www.inthewoodshop.com/Furniture/The140TrickisDead.html

Regards from Perth

Derek

Offline krudawg

  • Posts: 29
Re: Router Plane.
« Reply #7 on: February 21, 2019, 10:20 PM »
Those dovetails look very good. I took a Fundamentals of Wood Working and for two weeks thats all we did was cut half-blind and Through-Dovetails.  Never used the Router Plane except when we started hand-cut  Mortise and Tenons.  That Router plane is great for sizing the thickness of the tennon.
Ted
Mft/3, DF 500, Hammer K3 Winner, DF500, TS55
Former Marine Corporal