Author Topic: parody mfs  (Read 21823 times)

0 Members and 1 Guest are viewing this topic.

Offline mirock

  • Posts: 193
    • Yotube
parody mfs
« on: December 20, 2009, 11:25 AM »
We have hard to buy MFS has made such a pattern for themselves.

material of rectangle glass fiber
« Last Edit: December 20, 2009, 11:35 AM by mirock »
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #1 on: December 20, 2009, 11:27 AM »
Of course this is not something that should, but you can laugh
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #2 on: December 20, 2009, 11:29 AM »
Profile T. glued to plywood and fastened with screws. rest can be seen. Sorry for bad English.
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Chuck Kiser

  • Posts: 150
  • Carpenter in the Desert
    • Knollwood Construction Company
Re: parody mfs
« Reply #3 on: December 20, 2009, 11:36 AM »
Good work Miroc, I like it. I 'm sure it is less expensive as well. Assuming of course, your time is counted as free!
Life is too short for bad wine or cheap tools.

FS2700, FS1400(2), TS55, TS75, CT Midi, CT 22 w/ boom, ETS150/5, RO150, DF500, OF1400, OF1010, MFT1080(3), PS300, DX93, LR32, MFS700, MFS400, MFK700, ETS125, RTS400, RS2E, KAPEX, MFT/ KAPEX

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #4 on: December 20, 2009, 11:39 AM »
Good work Miroc, I like it. I 'm sure it is less expensive as well. Assuming of course, your time is counted as free!

almost no money) I don`t professional joiner. I`m builder. I have a hobby. Not done very carefully, can be better
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #5 on: December 20, 2009, 11:41 AM »
add another line and the profile of the top and bottom clamps for both festool
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #6 on: December 20, 2009, 11:45 AM »
we do not all you can buy. We have to do yourself

example

my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Charimon

  • Posts: 651
  • Tool and Tile Junkie
Re: parody mfs
« Reply #7 on: December 20, 2009, 12:38 PM »
Mirock
Welcome to the FOG  [welcome]

Great idea

Craig
"The existence of the flame thrower proves that at one time, somewhere, somebody said, " You Know, There's a group of people over there that I'd like to set on fire right now but they're too far away."

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #8 on: December 20, 2009, 12:57 PM »
Thanks. Wery good forum. Now I read a lot of interesting
« Last Edit: December 20, 2009, 12:58 PM by mirock »
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline greg mann

  • Posts: 1894
Re: parody mfs
« Reply #9 on: December 20, 2009, 01:45 PM »
mirock,

Your English doesn't neet to be any better. The pictures are excellent in descibing your ingenuity. I love the vacuum adapter.
« Last Edit: December 20, 2009, 02:18 PM by greg mann »
Greg Mann
Oakland, Michigan

Offline Wim

  • Posts: 286
Re: parody mfs
« Reply #10 on: December 20, 2009, 01:56 PM »
Very good, my compliments. I just love it to see what can be done with simple methods and a limited supply of material.
I grew up in post-war Holland. A lot was destroyed and we had to build-up our daily live. We had to improvise almost everything and I'm still in the habit of making tools and templates from scraps. Some clever thinking can save you a lot of money.

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #11 on: December 20, 2009, 02:00 PM »
Yes, the cost of this template is very low. Work on the floor of the day. I looked at festool and decided to do himself. It's not just about money. That in itself is interesting.
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #12 on: December 20, 2009, 02:02 PM »
mirock,

Your Enlish doesn't neet to be any better. The pictures are excellent in descibing your ingenuity. I love the vacuum adapter.

Thanks. I see there are many good masters to take their experience
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Michael Kellough

  • Posts: 4888
Re: parody mfs
« Reply #13 on: December 20, 2009, 03:02 PM »
Mirock, thanks for posting your brilliant interpretation of the MFS jig. Outstanding!

Online Alex

  • Posts: 6778
Re: parody mfs
« Reply #14 on: December 20, 2009, 03:10 PM »
Mirock, welcome to the FOG. Nice to see someone from an area that isn't much represented here yet.

It is also nice to see your home made MFS. I had plans to make my own home version too, and your example will help me very nicely. I had an even simpler version in mind, your version is almost the real deal!

mirock,

Your Enlish doesn't neet to be any better. The pictures are excellent in descibing your ingenuity. I love the vacuum adapter.

Thanks. I see there are many good masters to take their experience

And now I will take yours .......  [big grin]
« Last Edit: December 20, 2009, 03:13 PM by Alex »

Offline Frank Pellow

  • Posts: 2748
  • Toronto, Ontario and Lake Pivabiska, Ontario
Re: parody mfs
« Reply #15 on: December 20, 2009, 03:25 PM »
Mirock I would like to welcome you to the Festool Owners Group and to thank you for posting the phtos of your home-made MFS.

I have an MFS and use it a lot and it looks to me like the one you made will do a very good job.
Cheers,   
               Frank (Festool connoisseur)

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #16 on: December 20, 2009, 03:57 PM »
Mirock I would like to welcome you to the Festool Owners Group and to thank you for posting the phtos of your home-made MFS.

I have an MFS and use it a lot and it looks to me like the one you made will do a very good job.

Thanks Frank, I watched your work - I applauded!

This template should be a little more fine-tuned.
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline RonWen

  • Retailer
  • *
  • Posts: 1701
    • Ordering
Re: parody mfs
« Reply #17 on: December 20, 2009, 07:53 PM »
Simply brilliant!  I also like the "ramp fixture" that you used to make the tapers.  Very well done.

Offline PaulMarcel

  • Posts: 1514
    • Voilà, my blog
Re: parody mfs
« Reply #18 on: December 21, 2009, 03:28 AM »
I'm very impressed with everything I see in the photos.  Next time I feel like complaining that I don't have some do-dad (jig-like thing) to make the job easier, I'll use your post as inspiration to just go make it!

When I first looked at the photos, I noticed that it looks like you have a home-made table saw.  I then further noticed that there's an MFT-like surface on the side... Did you make a cube that has an MFT on the side of a tablesaw and you simply rotate the cube for what you need?  I could see that being pure genius in combination with another table.  You also have a pretty nicely made router table.

Personally, I'm up for a shop-tour of your shop!

дуже дякую
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #19 on: December 21, 2009, 12:28 PM »
Thank you friends, but I'm not finished. Later refined the device. I want to make it through the system as MFT  [tongue]
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline nico

  • Posts: 94
Re: parody mfs
« Reply #20 on: December 21, 2009, 03:31 PM »
Mirock,

thumbs up, really super,
and just like PaulMarcel I saw the home made table saw
any chance to see the plans ...
and I'm very curious as well to see the MFT ;-)

regards,
Nico

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #21 on: December 22, 2009, 03:39 AM »
Mirock,

thumbs up, really super,
and just like PaulMarcel I saw the home made table saw
any chance to see the plans ...
and I'm very curious as well to see the MFT ;-)

regards,
Nico


MFT so far only in the plans. But I will show you what happens. We must think about how to do. One part of my system, I have done and satisfied. This table router. And his version of MFT will universalize. Be the same profile - T.



system will be based on such profiles. I made them out of rectangular tube, the circular saw.



Here's how I think that's a device used in the MFT - protractor



« Last Edit: December 22, 2009, 03:45 AM by mirock »
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Yuri

  • Posts: 54
Re: parody mfs
« Reply #22 on: December 22, 2009, 01:03 PM »
Good Job Marock, really good job.
You've done SO much with such a limited resources. I can only imagine what you're capable of creating if you had Festools at your service. You have a talent.


Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #23 on: December 22, 2009, 01:10 PM »
Good Job Marock, really good job.
You've done SO much with such a limited resources. I can only imagine what you're capable of creating if you had Festools at your service. You have a talent.



Thanks Yuri, I will buy a good tool, but there are things that are interesting to do yourself. For example MFT.

Now collecting material for this. And the tools themselves will buy. TC 55 in the first place.
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Pete Pedisich

  • Posts: 196
Re: parody mfs
« Reply #24 on: January 07, 2010, 11:12 AM »
mirock,

Just found this post. Great methods and thought process!
I agree, sometimes it is more fun and interesting to make something yourself.

Pete

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #25 on: January 07, 2010, 01:31 PM »
 [smile]
my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline Matthewajones

  • Posts: 209
Re: parody mfs
« Reply #26 on: January 07, 2010, 03:15 PM »
Reading this thread has reminded me about a documentary about all the American cars left in Cuba after Castro came into power and how the mechanics have had to adapt without factory parts.  It is called "Yank Tanks".

http://www.imdb.com/title/tt0312048/

check out the trailer on IMDB.
Matthew

Offline mirock

  • Posts: 193
    • Yotube
Re: parody mfs
« Reply #27 on: January 11, 2010, 03:16 PM »
We have made a lifts to the router using the technology to Matthias Wandel








my video channels:
http://www.youtube.com/channel/UCJFCZ2slzAMjP6ChFxYPv6A
And:
http://www.youtube.com/channel/UCSDylM1i5mnPHKtfuO0Jjvg
Ts-55\C 12\OF 1400\OF1010\Carvex420\HL 850 EB\Kapex 120\TXS\DR18

Offline RonWen

  • Retailer
  • *
  • Posts: 1701
    • Ordering
Re: parody mfs
« Reply #28 on: January 11, 2010, 03:39 PM »
That is an extremely clever and accurate lift for your router!  Great job.  We should all make more and buy fewer of our shop tools.

Offline Wim

  • Posts: 286
Re: parody mfs
« Reply #29 on: January 11, 2010, 05:39 PM »
That is a quite some inspiration to me. I'm in the process of making a sort of CMS-table, but with a different lift mechanism. I see a way to use dominos in a similar way. My brain is shifted in high gear.