Author Topic: End table  (Read 1915 times)

0 Members and 1 Guest are viewing this topic.

Offline ctvader

  • Posts: 61
End table
« on: April 29, 2019, 08:20 AM »
I made these for the wife.  She saw end tables @ Pier 1 ( but @ $249/each at the time, I told her I would attempt to make them. 

Legs and table made of poplar and the top is pine.  I brushed the legs and table with BM Advance in Linen White, used a foam brush on the top to apply GF WB woodstain and GF HP Topcoat in Satin. 

Pine was chosen for the top so I could practice on the design and to make sure the color was correct.  Will eventually be replaced with maple.

I learned a lot.. especially that I need to learn how to spray. 

I think they came out pretty close to what pier 1 has.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline deepcreek

  • Posts: 835
    • TimberFire Studio
Re: End table
« Reply #1 on: April 29, 2019, 08:46 AM »
Nice job!
Joe Adams
TimberFire Studio
Houston, Texas

Offline Alex

  • Posts: 6108
Re: End table
« Reply #2 on: April 29, 2019, 12:19 PM »
Very nice looking table. Good job on the replication, you save some money, make the wife happy, and have the satisfaction of telling everyone you made it yourself.

Excuse me for taking the liberty of making the picture a bit more accessible for your audience.

Offline jobsworth

  • Posts: 5838
  • Festool Baby.....
Re: End table
« Reply #3 on: April 29, 2019, 01:09 PM »
That is a very nice piece. WELL DONE! [big grin]

Offline Don T

  • Posts: 1889
  • Phoenix, Az
Re: End table
« Reply #4 on: April 29, 2019, 01:48 PM »
Nice looking table.  You nailed it.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Online Dick Mahany

  • Posts: 513
Re: End table
« Reply #5 on: April 29, 2019, 01:56 PM »
Great job.  What did you use to cut the tapers on the legs?   Nice proportions.  It also looks like you made drawers.  What did you use for the slides?  Very well done indeed.

Offline travisj

  • Posts: 363
Re: End table
« Reply #6 on: April 29, 2019, 03:59 PM »
Nice piece!

Sent from my iPhone using Tapatalk

Offline ctvader

  • Posts: 61
Re: End table
« Reply #7 on: April 29, 2019, 05:45 PM »
Thanks all.  The tapers were made on a table saw using this method (ffwd to 5:05) -

It took me a few times watching the video to understand his thinking.

Offline JimmySigns

  • Posts: 1
Re: End table
« Reply #8 on: May 07, 2019, 07:22 AM »
nice job, any chance of getting the plans?  [embarassed] I'm very new this and would like to give it a whirl.

Offline ultane

  • Posts: 29
Re: End table
« Reply #9 on: June 06, 2019, 02:28 PM »
^^^^^WHAT HE SAYS!!^^^^^
I might be wrong… Just ask my X...