Author Topic: Help on 18mm cabinet set up for DF 700  (Read 694 times)

0 Members and 1 Guest are viewing this topic.

Offline Clarkr

  • Posts: 4
Help on 18mm cabinet set up for DF 700
« on: April 09, 2019, 10:41 AM »
Hi Ive got a DF 700 I want to start making a cabinet. Ive cut my stock Im using 40mm dominos. 8mmm cutter
I Know you can use it on no less than 18mm. What Im struggling to work out is how you set up the boards for the cut when plunging into the face board. Because from the edge to the to top of the mortice the cut is 19mm when using the 500 technique of settinging the edgeboard back 18mm. I realise that now needs to be approx 6mm further back but is there an easy way of settting this up? 
Does anyone no a good video or help for this type of cut?
Hope this makes sense.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Blues

  • Posts: 21
Re: Help on 18mm cabinet set up for DF 700
« Reply #1 on: April 19, 2019, 05:18 PM »
Seneca Woodworking Imperial Thickness Gauge Set For Domino XL DF700


This is what you need. Hope it helps.