Author Topic: Snake Home  (Read 1054 times)

0 Members and 1 Guest are viewing this topic.

Offline rdr

  • Posts: 78
Snake Home
« on: April 29, 2019, 02:56 PM »
Daughters rescued a snake so I made a home for it.

two sheets of 18mm white Melamine to match their playroom furniture.

all dominoed and glued together.




Its a pretty basic design, the bottom cupboards flop down on Euro hinges I used the LR32 to route for those. The cupboard fronts have a 22.5 degree chamfer on the top to act as pull down handles.

This was the most complex/tedious bit, I had to route out a recess 12mm of the 18mm depth with a 6mm ledge for glass to sit on to allow for the heating pad system to sit underneath without touching.

all finished happy snake and happy daughter

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rmhinden

  • Posts: 204
Re: Snake Home
« Reply #1 on: April 29, 2019, 03:10 PM »
Nice!

Snake looks happy too :-)

Bob

Offline six-point socket II

  • Posts: 1034
  • aka @the_black_tie_diyer
Re: Snake Home
« Reply #2 on: April 29, 2019, 03:13 PM »
Looks great! And your daughter is way braver than me, If I'd saw a snake, I'd run ... Snake  [eek] [scared] [scared] [scared]

Kind regards,
Oliver
Kind regards,
Oliver

Offline travisj

  • Posts: 363
Re: Snake Home
« Reply #3 on: April 29, 2019, 03:46 PM »
Nice!  I’m sure your daughters love it. 



Better your girls than mine.


Sent from my iPhone using Tapatalk

Offline Don T

  • Posts: 1889
  • Phoenix, Az
Re: Snake Home
« Reply #4 on: April 29, 2019, 03:52 PM »
Looks great! And your daughter is way braver than me, If I'd saw a snake, I'd run ... Snake  [eek] [scared] [scared] [scared]

Kind regards,
Oliver

I’m with you. I would probably hurt myself trying to get away.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline DeformedTree

  • Posts: 582
Re: Snake Home
« Reply #5 on: April 29, 2019, 08:19 PM »
Definitely nicer than anything I'd make.  I'd cut a length of PVC, glue a cap on one and, install snake in, glue cap on other end, plus someplace no where near me.

 [big grin]