Author Topic: Free Tools (again )  (Read 1178 times)

0 Members and 1 Guest are viewing this topic.

Offline Rob Lee

  • Festool Dealer
  • *
  • Posts: 173
    • Lee Valley/Veritas
Free Tools (again )
« on: July 03, 2019, 11:16 AM »
Hi -

We have 5 free "somethings" to give away in a month or so....

To get one - you must:

1) be in North America
2) Own a Festool tracksaw
3) Not be a Festool dealer, or direct employee
4) only enter once
5) NOT have won in the other giveawy
6) Not reside in Quebec (sorry – I WANT to give you something, but the law says no…)
7) Compose a haiku about sawing (and post it!)

Haiku's generally have three lines, with 5/7/5 syllables per line. Something like :

Straining to cut oak,
I push my TS55 -
My teeth biting too..

If you are in the first 5 haiku posters in this thread - pls email me your preferred shipping address at rlee@leevalley.com , and I'll look after the rest!

Cheers,

Rob
« Last Edit: July 03, 2019, 11:25 AM by Rob Lee »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dogberryjr

  • Posts: 132
Re: Free Tools (again )
« Reply #1 on: July 03, 2019, 11:36 AM »
Cutting long boards to width
The dust collector humming
Soon comes a new table

Offline Rob Lee

  • Festool Dealer
  • *
  • Posts: 173
    • Lee Valley/Veritas
Re: Free Tools (again )
« Reply #2 on: July 03, 2019, 11:44 AM »
Will be out for a bit.....

Running a contest
But the dentist chair calls..
Wrong power tool for today! [eek]

Cheers -

Rob

Offline reidbailey

  • Posts: 19
Re: Free Tools (again )
« Reply #3 on: July 03, 2019, 11:46 AM »
I walk into the garage
Pull the trigger on my TS 55
I forgot to measure

Offline Pompeio

  • Posts: 48
Re: Free Tools (again )
« Reply #4 on: July 03, 2019, 11:50 AM »
Put TS55 on the track
Looked at table saw
Put it back

Offline live4ever

  • Posts: 820
Re: Free Tools (again )
« Reply #5 on: July 03, 2019, 12:02 PM »
Track saw is growling
The cold sweat drips from my brow
Cut is straight and true
Current systainer to productivity ratio:  very high

Offline denovo

  • Posts: 57
Re: Free Tools (again )
« Reply #6 on: July 03, 2019, 12:13 PM »
TS55 moves forward
wood gets cut perfectly straight
Table project complete!

Offline Dan Rush

  • Posts: 578
  • Trim carpenter
Re: Free Tools (again )
« Reply #7 on: July 03, 2019, 12:15 PM »
Track saw really rules
Everyone thinks I'm really cools
Now send me new tools

Sent from my SM-J337V using Tapatalk


Offline techne

  • Posts: 5
Re: Free Tools (again )
« Reply #8 on: July 03, 2019, 12:16 PM »
splinterguard aligned
the saw blade cuts clean and true
oops—wrong pencil mark

Offline Bob D.

  • Posts: 1226
Re: Free Tools (again )
« Reply #9 on: July 03, 2019, 01:36 PM »
Too late but I'll put this in anyway.

Project all laid out
With my track saw at the ready
I pause to measure twice
-----
It's a table saw, do you know where your fingers are?

Offline Rob Lee

  • Festool Dealer
  • *
  • Posts: 173
    • Lee Valley/Veritas
Re: Free Tools (again )
« Reply #10 on: July 03, 2019, 02:58 PM »
Hi -

Ok - as of now - all cut off!

Denovo was the 5th and last official winner....

But - I feel bad for the next three entries - so they're winners too...

Dan Rush, techne, and Bob D - pls send your shipping addresses too!

Cheers - and thanks for playing!

Rob

Offline Dan Rush

  • Posts: 578
  • Trim carpenter
Re: Free Tools (again )
« Reply #11 on: July 03, 2019, 03:19 PM »
Hey,  THANKS.

Sent from my SM-T580 using Tapatalk


Offline techne

  • Posts: 5
Re: Free Tools (again )
« Reply #12 on: July 03, 2019, 03:26 PM »
Thanks Rob! :)

Offline Pompeio

  • Posts: 48
Re: Free Tools (again )
« Reply #13 on: July 03, 2019, 03:45 PM »
Thank you!

Offline reidbailey

  • Posts: 19
Re: Free Tools (again )
« Reply #14 on: July 03, 2019, 04:16 PM »
Good fun. Thanks Rob!


Sent from my iPhone using Tapatalk

Offline Bob D.

  • Posts: 1226
Re: Free Tools (again )
« Reply #15 on: July 03, 2019, 07:56 PM »
Thank you Rob.
-----
It's a table saw, do you know where your fingers are?

Offline live4ever

  • Posts: 820
Re: Free Tools (again )
« Reply #16 on: July 03, 2019, 09:47 PM »
I’m excited.  What could it possibly be?!
Current systainer to productivity ratio:  very high

Offline Mark Katz

  • Posts: 33
Re: Free Tools (again )
« Reply #17 on: July 03, 2019, 09:59 PM »
Okay, I know this is all over but I thought there should be an acknowledgement that not all Festool tracksaws are TS55s.

AT55-E
in a classic systainer
still works just like new